How to Install Stock ROM on Motorola One Vision XT1970-1 (Firmware Guide)

Want to install the stock firmware on your Motorola One Vision? then you are in the right place. In this guide, we will help you in installing the official stock firmware on Motorola One Vision (codenamed kane) variant XT1970-1. Stock firmware comes in handy when you mess up your device to root it or install a mod or custom ROM. To be on the safe side, we always ask our users to download the official firmware on their PC and save it.

By installing a firmware flash file on Motorola One Vision XT1970-1, you can unbrick, restore, fix any software-related issue, downgrade or upgrade, resolve any bugs or lag on your device. To install the Motorola One Vision XT1970-1 firmware, you need the ADB and Fastboot tool on your computer.

How to Install Stock ROM on Motorola One Vision XT1970-01 (Firmware Guide)

Motorola One Vision XT1970-1 Firmware Flash Files:

    RSAS31.Q1-48-36-23 May 2022
    RSAS31.Q1-48-36-21 April 2022
    RSAS31.Q1-48-36-18 February 2022
    RSAS31.Q1-48-36-17 January 2022
    RSAS31.Q1-48-36-16 December 2021
    RSAS31.Q1-48-36-15 November 2021

    Steps to Install Motorola XT1970-1 Firmware Flash File

    If you have downloaded the firmware, then follow this guide to flash the stock firmware manually on your Motorola One Vision XT1970-1. Make sure to follow the steps carefully.

    Pre-Requirements:

    Disclaimer:

    GetDroidTips will not be held responsible for any kind of hardware or software damage to your device by following this guide. Proceed at your own risk

    Firmware Installation Guide:

    Check out the firmware flashing guide below for the Motorola One Vision XT1970-1. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

    bootloader mode

    Advertisements

    Step 1. Bootloader Mode

    Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold volume down, and turn it on. You should see the bootloader screen.

    Step 2. Connect Your Device to PC:

    After booting your Motorola One Vision into bootloader mode, now connect it to the PC using the USB Cable.

    Step 3. Download Stock ROM/Firmware:

    To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

    device rescue Motorola Rescue and Smart Assistant Tool

    Advertisements

    You can also download the full stock ROM from the above download flash file section on this guide.

    Step 4. Flashing Guide:

    1. The next step is to open the command window and go to the adb folder Open Command Window here
    2. Enter the following command to flash the firmware.
      fastboot flash pit diskmap.pit
      
      fastboot flash fwbl1 fwbl1.img
      
      fastboot flash ldfw_a ldfw.img
      
      fastboot flash ldfw_b ldfw.img
      
      fastboot flash keystorage_a keystorage.img
      
      fastboot flash keystorage_b keystorage.img
      
      fastboot flash bootloader_a bootloader.img
      
      fastboot flash bootloader_b bootloader.img
      
      fastboot flash modem_a modem.bin
      
      fastboot flash vbmeta_a vbmeta.img
      
      fastboot flash oem_a oem.img
      
      fastboot flash oem_b oem_other.img
      
      fastboot flash logo_a logo.bin
      
      fastboot flash dtbo_a dtbo.img
      
      fastboot flash boot_a boot.img
      
      fastboot flash system_a system.img_sparsechunk.0
      
      fastboot flash system_a system.img_sparsechunk.1
      
      fastboot flash system_a system.img_sparsechunk.10
      
      fastboot flash system_a system.img_sparsechunk.2
      
      fastboot flash system_a system.img_sparsechunk.3
      
      fastboot flash system_a system.img_sparsechunk.4
      
      fastboot flash system_a system.img_sparsechunk.5
      
      fastboot flash system_a system.img_sparsechunk.6
      
      fastboot flash system_a system.img_sparsechunk.7
      
      fastboot flash system_a system.img_sparsechunk.8
      
      fastboot flash system_a system.img_sparsechunk.9
      
      fastboot flash   system_other.img_sparsechunk.0
      
      fastboot flash  system_other.img_sparsechunk.1
      
      fastboot flash  system_other.img_sparsechunk.2
      
      fastboot flash vendor_a vendor.img
      
      fastboot erase userdata (Do it, if you want to clear all your data)
    3. Now your device will reboot into bootloader with the firmware you installed.

    That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.