QMobile i5i 2019 Firmware Flash File (Stock ROM)

Are you looking to install a firmware file on QMobile i5i 2019? Then you are just in the right place. In this post, we have brought you the latest stock firmware for the QMobile i5i 2019.

These days installing custom ROMs, rooting the device is a pretty common scenario among smartphone enthusiasts. However, not every day is a sunny day. Usually, while customizing your device you may have performed some wrong steps and ended up with a bricked device or a phone stuck in the endless boot loop. Sometimes the new custom OS you install brings a lot of unforeseen bugs. So, the only solution is to take the device back to its previous state. This technically means flashing the stock firmware on the smartphone.

Talking of the QMobile i5i 2019, we have put up the latest stock firmware of the phone along with the flash tool and a complete tutorial to help you install the stock ROM correctly on the device. We have laid out all the instructions in a simple and detailed manner. So, it should be a cakewalk for you to install stock ROM on QMobile i5i 2019.

QMobile i5i 2019 Firmware Flash File

How to Install Stock ROM on QMobile i5i 2019?

Installing a stock ROM is pretty easy. All you have to do is download the stock ROM for the corresponding device. Then grab the USB drivers, an exclusive flash tool that we will use for performing the installation. Talking of the flash tool, we are using the Spreadtrum Flash tool in this guide because the QMobile i5i 2019 runs on the Spreadtrum chipset.

You will also require some other tools which we have listed out below. You have to download and install them as instructed. Before getting on towards the installation, let’s find out the importance of stock ROM.

Why Stock ROM is important.?

A stock ROM is an OS which the device runs when it’s unboxed. It’s the pre-built operating system. So, by flashing the firmware, you would literally take back the device to its original working state.

  • A stock ROM can fix the device boot loop issue
  • If your phone is bricked, then you can unbrick it by flashing the device with the latest stock ROM
  • You can upgrade/downgrade the OS of your device via flashing a  stock ROM only.
  • it is important during unrooting the device and going back to stock

Firmware Details

  • Device Name:  QMobile i5i 2019
  • ROM Type: Firmware
  • Gapps File: Included
  • Tool Supported: SPD Flash Tool
  • Chipset: Spreadtrum SoC
  • Android Version: Android 8.1

Firmware Installation Guide for QMobile i5i 2019

As mentioned before, here is the list of flash tool and other software which are important to successfully install stock ROM on QMobile i5i 2019.

Pre-Requisites:

Download Flash Files:

Flash File Name: SP7731E_I5I2019_8.1.0_OPM2.171019.012_miracle.rar
File Size: 691 MB
OS: Android 8.1
Download

Guide for Firmware Installation

The tutorial linked below will guide you to flash the latest stock ROM on the device.

Guide to Install Stock ROM using Spreadtrum Flash Tool

So, guys.! We hope that this tutorial to install the firmware flash file on QMobile i5i 2019 was useful to you. Install the firmware and enjoy. If you have any queries do let us know in the comments section.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.