Samsung A42 5G SM-A426B Firmware Flash File (Stock ROM)

On this page, we have shared the download link and guide to install the Samsung SM-A426B (Galaxy A42 5G) firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here you will find all stock firmware zip files for all the supported regions with Samsung SM-A426B.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Samsung Galaxy A42: Device Overview

Samsung has been releasing phones left, right, and center these past few months in the hope of capturing the smartphone monopoly that it once used to have in countries such as Europe and India. Their latest release is the Samsung Galaxy A42 which brings some very unique characteristics to the board and is aimed at a very specific audience in mind. The Galaxy A42 is a 5G-enabled phone that was announced on September 2 of 2020 and is being sold in the European market for a price tag of €369.

It has a large footprint with a 6.6-inch Super AMOLED display to the front. The display has very tiny bezels to the sides with a slightly more pronounced chin. It also makes space for the front-facing 20-megapixel camera in a subtle U-shaped waterdrop notch. The back panel of the Galaxy A42 has a refreshing and unique look to it with a camera bump that is home to the quad-camera sensor.

The rear camera bump features the main 48-megapixel sensor alongside an 8MP ultrawide lens, a 5MP depth sensor, and another 5MP macro camera. This camera setup basically covers most of the shooting scenarios and should suit well for people who like capturing a lot of photos. The processor onboard is speculated to be the new Snapdragon 690 SoC and the phone is backed up by 4GB of RAM. The Galaxy A42 also comes with a mammoth 5000 mAh battery with fast charging capabilities.

Samsung Galaxy A42 5G SM-A426B Flash Files:

Steps to Flash Stock ROM File on Galaxy A42 5G SM-A426B

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy A42 5G, let us take a look at the pre-requirements first.

Pre-Requirements: 

• This Guide is for Samsung Galaxy A42 5G SM-A426B
• You need a Windows PC/Laptop and a USB cable to flash a firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy A42 5G.

1. Download the Samsung SM-A426B flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Check out our full depth video guide as well.

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.