Advertisements

How to Install Stock ROM on Samsung SM-M307F (Firmware Guide)

On this page, we have shared the download link and guide to install the Samsung SM-M307F (Galaxy M30S) firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here you will find all stock firmware zip files for all the supported regions with Samsung SM-M307F.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

How to Install Stock ROM on Samsung SM-M307F (Firmware Guide)

Samsung Galaxy M30S SM-M307F Flash Files:

Flash File Name: SM-M307F_M307FXXU4CUAG_11.0_file.zip
Build Number: M307FXXU4CUAG
Security Patch: November 2020
Model:
SM-M307F
Android Version: 11 R
Download
Flash File Name: SM-M307F_M307FXXU4BTK1_10.0_file.zip
Build Number: M307FXXU4BTK1
Security Patch: November 2020
Model:
SM-M307F | Region: India
Android Version: 10.0
Download
Flash File Name: SM-M307F_M307FXXU4BTI3_10.0_file.zip
Build Number: M307FXXU4BTI3
Security Patch: October 2020
Model:
SM-M307F | Region: Asia
Android Version: 10.0
Download
Flash File Name: SM-M307F_M307FXXS4BTI2_10.0_file.zip
Build Number: M307FXXS4BTI2
Security Patch: September 2020
Model:
SM-M307F | Region: Asia
Android Version: 10.0
Download

Steps to Flash Stock ROM File on Galaxy M30S SM-M307F

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy M30S, let us take a look at the pre-requirements first.

Pre-Requirements: 

  • This Guide is for Samsung Galaxy M30S SM-M307F
  • You need a Windows PC/Laptop and a USB cable to flash the firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on the Samsung Galaxy M30S.

Disclaimer:

We’re at GetDroidTips won’t be responsible for any kind of damage/error that occurs to your handset while/after following this guide or flashing any file. Proceed at your own risk.
  1. Download the Samsung SM-M307F flash file
  2. Extract the contents of the firmware flash file zip.
  3. Launch the ODIN application
  4. Load the firmware files in their appropriate section
  5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  6. Notice that the CO port will light up on Odin once you connect your phone.
  7. Click the Start button to install the firmware on your Samsung device.
  8. That’s it! You will see a PASS message once the installation is complete.
Follow Complete Guidelines

Check out our full depth video guide as well.

Video Tutorial To Install Firmware

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.