In this tutorial, we will guide you on how to install the Samsung SM-M307FN (Galaxy M30S) flash file using the Samsung flash tool (also known as the ODIN flash tool). On this page, you will find the official stock firmware file for the Samsung Galaxy M30S SM-M307FN, drivers, and flash tool.
By flashing the Stock ROM file, you can always fix the device software issue such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, and many more.
Also Read
Page Contents
Samsung Galaxy M30s Specifications:
Samsung Galaxy M30s was announced in September 2019 which sports a 6.4-inch Super AMOLED display with a screen resolution of 2400 x 1080 pixels with 411 PPI pixel density. The device is protected by Corning Gorilla Glass.
Samsung Galaxy M30s is powered by an Exynos 9610 (10nm) chipset coupled with 4/6GB of RAM and 64/128GB of internal storage. It also supports a 1TB external memory card. The device came out of the box with an Android 9.0 Pie and was backed by a 6000 mAh battery (Non-removable).
As far as the camera is concerned, the device has a Triple-camera setup with 48MP + 8MP + 5MP primary sensors and a selfie camera with a 16MP lens. Other connectivity option includes 4G-VoLTE, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, ambient light sensor, gyroscope, proximity sensor, and compass/ magnetometer. etc. The Samsung Galaxy M30s come with a rear fingerprint sensor feature.
Samsung Galaxy M30S SM-M307FN Firmware Flash Files:
| Flash File Name: SM-M307FN_ M307FXXU4CVJ1_11.0_file.zip Build Number: M307FXXU4CVJ1 Security Patch: October 2022 Model: SM-M307FN Android Version: 11.0 |
Download |
| Flash File Name: SM-M307FN_ M307FNXXS4CVJ1_11.0_file.zip Build Number: M307FNXXS4CVJ1 Security Patch: October 2022 Model: SM-M307FN Android Version: 11.0 |
Download |
| Flash File Name: SM-M307FN_M307FNXXS4CVC1_11.0_file.zip Build Number: M307FNXXS4CVC1 Security Patch: February 2022 Model: SM-M307FN Android Version: 11.0 |
Download |
| Flash File Name: SM-M307FN_M307FNXXU4CUJ2_11.0_file.zip Build Number: M307FNXXU4CUJ2 Security Patch: October 2021 Model: SM-M307FN Android Version: 10.0 |
Download |
| Flash File Name: SM-M307FN_M307FNXXU4BTL2_10.0_file.zip Build Number: M307FNXXU4BTL2 Security Patch: December 2020 Model: SM-M307FN Android Version: 10.0 |
Download |
Steps to Flash Stock ROM File on Galaxy M30S SM-M307FN
Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy M30S, let us take a look at the pre-requirements first.
Pre-Requirements:
- This Guide is for Samsung Galaxy M30S SM-M307FN
- You need a Windows PC/Laptop and a USB cable to flash the firmware.
- Charge your device with a minimum of 50% battery backup.
- You have to download the latest Samsung USB Drivers and install them on your PC.
- Make sure that you have ODIN Software installed on your PC.
- Take a backup of your device (No Root) before doing anything.
Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy M30S.
Installation Guide
Disclaimer:
- Download the Samsung SM-M307FN firmware flash file
- Extract the contents of the firmware flash file zip.
- Launch the ODIN application
- Load the firmware files in their appropriate section
- Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
- Notice that the CO port will light up on Odin once you connect your phone.
- Click the Start button to install the firmware on your Samsung device.
- That’s it! You will see a PASS message once the installation is complete.
Check out our full-depth video guide as well.
We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.