How to Install Stock ROM on Wiko Power U20 [Firmware Flash File/Unbrick]

On this page, we have shared the official firmware flash file for Wiko Power U20 based on Android 11.0. To install the firmware flash file on Wiko Power U20, you need the software flash tool known as SP Flash Tool (aka Smartphone flash tool). This software is supported for MediaTek Helio G35 powered devices.

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. These feats can be achieved by providing root access to your device or simply rooting your phone.  In today’s date, rooting or customizing is no rocket science, but people perform these processes carelessly. Certain users hastily carry out the modding/rooting process without properly following instructions. It leads to the bricking of the device. It can happen with any device. By following this guide, you can easily restore the factory settings on your Wiko Power U20 smartphone.

Wiko Power U20

Why We Need Flash Files?

Stock Firmware or a Stock ROM is official software that is designed by the OEM manufacturer for a particular device. This file is required to fix any software related issue on your Wiko Power U20. If you are facing any problem with your device, your final attempt will be to re-install the stock ROM. This way, you can restore your device back to stock ROM. This guide will be more useful to those users who always want to try rooting, installing mods, or custom ROM.

The Advantage Of Stock ROM:

  • Flash Stock To Unbrick your Wiko Power U20
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Wiko Power U20
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Wiko Power U20
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Firmware Details:

  • Gapps File: Included
  • Device Supported: Wiko Power U20
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek Helio G35
  • OS: Android 11.0

Steps to Install Stock Firmware on Wiko Power U20:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Warning!

GetDroidTips will not be responsible for any kind of hardware or software damage to your device while or after you follow this guide. Do the manual flashing process at your own risk. Taking a full data backup is always recommended.

Pre-requisites

Download Flash Files:

Flash File Name: V750BN_11.0_WIK_TH_33 – full_v750-user
File Size: 2 GB
OS: Android 11
Download Link: Click Here

Advertisements

Instructions to install:

Here is a detailed guide mentioned below which you can follow completely.

  1. Make sure you follow and download all the required files and flash tool on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your Wiko Power U20, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware
  7. Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
  8. That’s it! You can reboot your Wiko Power U20

I hope you installed the firmware file on Wiko Power U20 successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.