T-Mobile Galaxy S7 and Galaxy S7 Edge Stock Firmware Collections

In this list we have added both firmware for T-Mobile Galaxy S7 and Galaxy S7 Edge which came out of the box. You can use this firmware in case if you brick your device, or if you want to downgrade or get back to stock ROM. You can use our guide which pretty explains you on How to Unbrick your Galaxy S7 and Galaxy S7 Edge using our list of T-Mobile Galaxy S7 and Galaxy S7 Edge Stock Firmware Collections.

Download the ROM which we have listed in this table below. You can also update your T-Mobile Galaxy S7 and Galaxy S7 Edge smartphone anytime, also you can install the Stock Firmware build to revert back to old version also. In case if you have bricked your device, then you can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your T-Mobile Galaxy S7 and Galaxy S7 Edge lag or has an issue, then flash the stock firmware from the list below and save from such a situation. Stock Firmware doesn’t void warranty on your T-Mobile Galaxy S7 and Galaxy S7 Edge.

The Advantage Of Stock Firmware:

• Flash Stock To Unbrick your T-Mobile Galaxy S7 and Galaxy S7 Edge
• Flash Stock ROM to Fix the Bootloop problem
• Upgrade and Downgrade T-Mobile Galaxy S7 and Galaxy S7 Edge
• Unroot or Fix Bugs on your phone
• To fix the lag or stutter on T-Mobile Galaxy S7 and Galaxy S7 Edge
• By flashing Stock ROM, you can solve software problems.
• Revert back to stock to gain your warranty.

READ THIS CAUTION:

So before jump into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM on T-Mobile Galaxy S7 and Galaxy S7 Edge.

PRE-REQUISITE :

• Remember : This Stock Firmware is for T-Mobile Galaxy S7 and Galaxy S7 Edge.
• Your device must have 70% Of battery
• You need a Laptop or PC to perform this Action
• Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
• Make sure you have followed the steps properly. Don’t Skip and Read ! – We are not responsible for any damage that you make to your Phone.

DOWNLOAD THE FILES THAT REQUIRED :

• Download and Install the Samsung Kies Software : CLICK HERE or
• Download and Install the Samsung USB Drivers : CLICK HERE
• Download and Extract the ODIN ZIP file on Desktop : CLICK HERE

Note : This is the full OTA File. So you don’t have to be running Stock ROM to update this Full ROM on T-Mobile Galaxy S7 and Galaxy S7 Edge.

List of T-Mobile Galaxy S7 Stock Firmware collection

List of T-Mobile Galaxy S7 Edge Stock Firmware collection

Steps For How To Install Stock Firmware on T-Mobile Galaxy S7 and Galaxy S7 Edge.

1. If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
   • First of all, enable the USB Debugging
   • To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
   • Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging 
2. Open the Extracted ODIN File called ODIN v3.11.1 exe file using the Administrator – Right Click your mouse and Open using Administrator 
3. Now Reboot your Phone into Download Mode
4. So First Turn your Phone off -> press and hold Home + Power + Volume Down buttons Until you see a download mode.
5. Now Connect your Phone to PC using the USB Cables
6. When you connect the USB cable you will see a blue sign in Odin 
7. Now Go back again Odin and Add the firmware which you downloaded from Above by Clicking AP/PDA Button 
8. Now Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)
9. Click the start button, sit back and wait a few minutes until you see a message pass. Once you see PASS, you can remove your Phone from the part. Don’t Panic if you see your Phone restart while updating.

That’s ALL! When you restart your Phone, You will have the newly installed version of Stock ROM on T-Mobile Galaxy S7 and Galaxy S7 Edge. Enjoy.