Download Tecno Camon 12 Pro CC9 Secure Boot DA auth file

TECNO Camon 12 Pro CC9 is powered by the Mediatek MT6762 Helio P22 Octa-core 2.0 GHz Cortex-A53 processor. Now, if you’re using the Tecno Camon 12 Pro device and facing issues like authentication or buffer error, you will need to fix it via the SP Flash Tool or Miracle Box or CM2 box. But if you don’t fix it, you will encounter a secure boot error. In order to flash those devices, you will require a Secure Boot DA file. Here you can download and install Tecno Camon 12 Pro MTK Secure Boot DA file.

If your MediaTek powered Android device got corrupted or bricked, you will require a Download Agent file to access its onboard storage and fix it. Here in this guide, we will share with you the steps to install the Download Agent (DA) files for your device. The boot file or firmware file is also known as the DA file. The DA file is necessary to flash any file into a sucre boot enabled MTK device.

Download Tecno Camon 12 Pro CC9 Secure Boot DA auth file

Advantages of Download Agent Loader Files

  • Bypass Factory Reset Protection (FRP Lock) on the Tecno Camon 12 Pro
  • System Image backup of the Tecno Camon 12 Pro
  • Read security codes of an MTK device
  • Can flash new firmware on a Tecno Camon 12 Pro
  • Clone a Recovery Image or boot files

Disclaimer:

GetDroidTips won’t be responsible for any kind of damage or error that will occur on your device by following this guide or flashing any file. Proceed at your own risk.

Download Link:

Pre-requirements:

  • This DA file is supported for the Tecno Camon 12 Pro device only.
  • You’ve to download the DA file for your Tecno Camon 12 Pro device from the link above.
  • A PC/Laptop and a USB cable are required.

Steps to Install Tecno Camon 12 Pro MTK Secure Boot DA auth File

Method 01: Use NCK Box

  • Download NCK Pro Box | NCK Pro Box Drivers – Install both on your PC
  • Launch the NCK box on your PC > Click on FRP-PATTERN-PRIVACY-RESET.
  • Click to select Custom Loader.
  • Then head over to the DA file and select the downloaded DA file.
  • Click on Flash Mode.
  • Next, open NCK Loader > Click on Settings.
  • Head over to the DA file and select the downloaded DA file.
  • Go back to the Service tab > Click on Reset.0
  • Y0ur Tecno Camon 12 Pro will now reboot with reset FRP lock system

For a complete step by step guide on how to install DA file using NCK Pro Box

Method 02: Use SP Flash Tool

  • Launch the SP Flash Tool on your PC.
  • Click on the Download tab.
  • Click on the Choose option and select the downloaded DA file.
  • The DA file will load automatically and install it.

For a complete step by step guide on how to install the DA file using SP Flash tool

Method 03: Use Miracle Box

For a complete step by step guide on how to install the DA file using Miracle Box

That’s it, guys. We hope you’ve successfully installed the DA file on your Tecno Camon 12 Pro CC9 device. For any queries, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.