Fix: Xbox Series X and S HDMI Not Working 

Microsoft’s two new game systems, the Xbox Series X and S, are very popular in the console market. Although they have a number of changes, such as new hardware and quicker loading times, customers have reported having problems with HDMI on these devices. The “No Signal” warning, where the screen goes blank, and the console stops showing any content, is one of the most frequent issues.

Additional signs include static, glitchy, or dark screens, as well as console messages like “Game console (is it on?).” The good news is that there are various fixes available to assist you in getting back to gaming. We will discuss them here.

Fix: Xbox Series X and S HDMI Not Working 

Reasons for Xbox Series X/S HDMI Not Working

The Xbox Series X and S provide an immersive gaming experience with amazing visuals and fluid performance. However, you occasionally may suffer problems with the HDMI output, which might ruin your gaming experience. Following are a few of the typical causes of HDMI issues on Xbox Series X/S:

  1. Firmware bug: A firmware bug may interfere with your Xbox Series X/S’s HDMI output. Even when the console is turned on, it may result in a blank screen or no signal on your TV or monitor.
  2. User error when plugging in cords: Sometimes, people connect the HDMI cable to the console, TV, or monitor incorrectly. Your Xbox Series X/S’s HDMI port may not function due to a loose connection or improper insertion.
  3. Physical damage to hardware: Physical damage to the HDMI port or cable can result in connectivity problems, which prevent HDMI from operating on your Xbox Series X/S. Mishandling or unintentional harm may be the cause of this.
  4. Bad connection: Problems with the HDMI output on your Xbox Series X/S can result from deficient wiring or broken components in the HDMI cable, the TV, or the monitor.

Fixes for Xbox Series X/S HDMI Issues

These were a few of the typical causes of HDMI issues on Xbox Series X/S. There are numerous methods you may try to get your console back up and running if you are experiencing similar problems. We have discussed them below. Make sure to try all the fixes.

Fix 1: Check the HDMI Cable

When you encounter HDMI issues on your Xbox Series X or S, one of the first things to check is the HDMI cable. Sometimes, the cable may be loose or not connected correctly, causing the problem. To fix this, unplug the HDMI cable from both the console and TV, then plug it back in firmly. Ensure that the cable is seated properly and there are no bent or damaged pins.

Fix 2: Check the Power Supply

The power supply may sometimes be the cause of your Xbox Series X or S not appearing properly on your TV. Follow the steps below to inspect the power supply:

  1. Disconnect the Xbox’s power cord from the wall outlet as well.
  2. Before re-plugging the power cable, wait at least 10 seconds.
  3. Ensure that the Xbox console, the wall outlet, and the power supply are all securely connected.
  4. To rule out any problems with the original outlet, try a new wall outlet.
  5. Check to see if the LED light on the power supply is on. If it isn’t, you may need to replace the power supply because it can be faulty.

Fix 3: Check the TV Input

If your Xbox Series X or S is not displaying anything on your TV after connecting the HDMI cable, it might be because the TV input settings are incorrect. Here’s how to check and fix it:

  1. Turn on your TV and select the HDMI input for your Xbox by pressing the Input/Source button on your TV remote control until you see the Xbox screen.
  2. Check if your Xbox is connected to the correct HDMI port on your TV by looking for labels like “HDMI 1” or “HDMI 2” close to the port.
  3. If you don’t see anything on your TV, unplug the HDMI cable from both the Xbox and TV, and then plug it back in firmly.
  4. If you have another HDMI cable, try using it to see if it works.
  5. If none of these steps works, consult your TV’s user manual and follow the instructions to reset your TV to its factory settings.

Fix 4: Try a Different TV

If you have tried all the above fixes and it is still not fixed, the issue may be with your TV. Your TV’s HDMI port could not be working correctly, or it might not be compatible with the Xbox Series X or S.

Try connecting your Xbox to a different TV or monitor to see if the problem is with that one instead of your TV. If the Xbox functions properly on a different TV, your primary TV is the issue.

You might try returning the TV to its default settings or asking the manufacturer for assistance. It can also be worthwhile to try a new HDMI cable because some cables might not be compatible with all TVs.

If none of these solutions works, you may need to consider getting a new TV or contacting a professional for further assistance. However, it is important to note that this is a last resort and should only be considered after exhausting all other possible solutions.

Fix 5: Perform a Hard Reset

Hard resetting your Xbox Series X or S is one of the simplest yet most efficient solutions to fix the HDMI problem. This procedure involves totally turning off the console and unplugging it from the power supply for a while. It assists in removing any temporary glitches or faults that might be the source of the HDMI connection issue.

Follow these steps to perform a hard reset on your Xbox Series X or S:

  1. For around 10 seconds, press and hold the Xbox button on the front of the console. The console should now shut down.
  2. Unplug the power line from the console’s back after turning it off, then wait for at least two to three minutes.
  3. Plug the power cable back in and turn on your console by pressing the Xbox button on the front of the console or the Xbox controller.
  4. Check if the HDMI issue is resolved. If not, try another fix from the list.

Fix 6: Check for Firmware Updates

Sometimes, the HDMI not working issue can be caused by outdated firmware on your Xbox Series X or S. Firmware updates often include bug fixes and improvements that can help solve various issues, including HDMI connectivity problems.

To check for firmware updates, follow these steps:

  1. Press the Xbox button on your controller to open the guide.
  2. Select Profile & system > Settings > System > Console info & updates.
  3. Check if there is an available update. If there is, select it and follow the prompts to download and install it.
  4. After the update is complete, restart your Xbox and check if the HDMI connectivity issue has been resolved.

Fix 7: Check for TV Firmware Updates

If you have tried all the previous fixes and your Xbox Series X or S still won’t display on your TV, it could be worthwhile to see whether your TV has any firmware updates available.

Firmware updates for TVs are frequently released by manufacturers to fix bugs and enhance functionality. These upgrades may also fix compatibility problems with third-party hardware, such as game consoles.

You must go to your TV’s user manual or the manufacturer’s website for advice on how to check for firmware updates. Normally, you’ll need to find the option to check for updates in the settings menu on your TV.

If an update is available, follow the instructions provided by your TV manufacturer to download and install it. Once the update is installed, reconnect your Xbox Series X or S to your TV and see if the HDMI connection is working. If you are still facing the issue after the firmware update, then the issue is with your HDMI port or the console itself.

Fix 8: Try a Different HDMI Port

If the HDMI cable is connected correctly and the TV is up to date, but you’re still experiencing issues, try plugging the cable into a different HDMI port on your TV. Sometimes, certain ports may be faulty or not compatible with your console, causing HDMI issues. If your TV has multiple HDMI ports, try plugging the cable into a different one to see if that resolves the problem.

Fix 9: Disable 4K Resolution

If none of the previous fixes has worked, you may need to disable the 4K resolution on your Xbox Series X or S. This is a temporary solution that can help you identify if the issue is related to the 4K resolution or not.

To disable the 4K resolution, follow these steps:

  1. Press the Xbox button on your controller to open the guide.
  2. Go to Profile & system > Settings.
  3. Select General.
  4. Select TV & display options.
  5. Under Video modes, select 1080p.
  6. Restart your Xbox Series X or S.

If your Xbox Series X or S works fine with 1080p resolution, then the issue is most likely related to the 4K resolution. You can try the previous fixes again or contact Xbox support for further assistance.

If disabling the 4K resolution doesn’t solve the problem, you can enable it again by following the same steps and selecting the 4K option under Video modes.

Fix 10: Contact Microsoft Support

If you have tried all the previous fixes and still haven’t been able to solve the HDMI issue with your Xbox Series X or S, it may be time to contact Microsoft Support.

Microsoft offers support in a variety of ways to get in touch with their team, including phone, chat, email, and social media. You can contact them the way you wish.

Final Words

So, these were the fixes for the HDMI issues on your Xbox Series X/S. HDMI issues can be due to several reasons. However, fixing the issues is often really easy. Make sure you try all the solutions mentioned in the article before contacting Microsoft support. If you have any further questions, let us know in the comments section below. We will try to help you out.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.