In this guide, we will show you the real image of the ISP pinout and test point for the Xiaomi Mi 11 (venus). By using the ISP PinOUT, you can easily restore the stock ROM, bypass FRP lock, or reset user data on your device via UFi Box. In this guide, we will also guide you on how to reboot into 9008 EDL Mode.
Page Contents
Xiaomi Mi 11 Device Overview:
The Xiaomi Mi 11 features a 6.81-inches AMOLED Panel with support for 1B colors. It has a resolution of 1440 x 3200 pixels and an aspect ratio of 20:9. This is a 120 Hz high refresh rate panel that can go as high as 1500 nit in brightness. And as for protection, we have the latest Corning Gorilla Glass Victus on the Mi 11. For the processor, we get the latest and top-of Qualcomm Snapdragon 888, an octa-core processor built on a 5nm manufacturing process. It has one Kryo 680 core clocked at 2.84 GHz Kryo 680, 3 Kryo 680 cores clocked at 2.42 GHz, and four Kryo 680 cores clocked at 1.8 GHz.
Coming to optics, we get a triple camera setup with a 108 MP primary sensor with an f/1.9 lens, a 13MP ultrawide sensor with an f/2.4 lens, and a 5MP macro sensor paired with an f/2.4 lens. We get PDAF, OIS, Dual-LED dual-tone flash along with 8K video support at 24/30 fps. For selfies, we get a single 20MP wide sensor paired with an f/2.4 lens. The front is only limited to 1080p videos. We have a number of options for this device when it comes to RAM and storage variants: 8GB + 128GB, 8GB + 256GB and 12GB + 256GB. It runs on MIUI 12.5 skinned on top of Android 11.
For connectivity, we get Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.2, GPS, NFC, and USB Type-C 2.0. And for sensors, we have the under-display fingerprint sensor(optical), accelerometer, gyro, proximity, infrared, and compass. We get a moderate battery size of 4,600mAh with support for 55W fast charging. The company claims a charging speed of 100% in 45 minutes. The smartphone also supports 50W fast wireless charging. This smartphone is available in five color options: Black, White, Blue, Purple, and Khaki.
What is ISP PinOUT?
ISP or In-system programming also known as in-circuit serial programming (ICSP) for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile, computer. You will find the IS Pinout connection on the logic board of your device. Therefore, you will need to remove the back panel of the handset and follow the below image to locate the pinout.
Xiaomi Mi 11 ISP Pinout Image:
How to Enter EDL Mode on Xiaomi Mi 11 (venus)
Follow this instruction carefully to boot your device into EDL Mode (aka Emergency DownLoad Mode)
Method 1: Using ADB
- Download ADB and Fastboot Tool and extract it to your PC (C:/ Drive)
- Connect your device to your PC
- Open the adb command and enter the command
.\adb reboot edl
Method 2: Using Fastboot
- Download ADB and Fastboot Tool and extract it to your PC (C:/ Drive)
- Boot your device into the bootloader
- Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
- now enter the command
.\fastboot oem edl
Method 3: By Hardware Test Points / Restore Your device
- Download the QDLoader driver
- Find the EDL PinOUT/Test Point on your device (refer to image above to find the test point)
- To enter EDL mode, you need to use a metal tweezer or a conductive metal wire to short the points.
- Once you are done, connect your device to the PC using a USB cable
- This way, your device will enter EDL mode. Now you can open the QFil or QPST Tool to flash the firmware and restore your device.
I hope this guide was helpful to find the Xiaomi Mi 11 (venus) ISP Testpoints.