On this page, we will guide you on how to download and install the Xiaomi Redmi Note 8 2021 (biloba) DA files. DA file also known as the Download Agent file is a file that helps in fixing the device secure boot error. If you are using the Redmi Note 8 2021 and facing any issues such as FRP lock, corrupted memory, secure boot error, authentication, or buffer error.
To flash the Secure Boot DA file on your Redmi Note 8 2021, you need flash tools like SP Flash Tool, NCK Box, Miracle Box, or CM2 box. Follow our step-by-step guide to install the Download Agent (DA) files for your Redmi Note 8 2021.
Page Contents
Redmi Note 8 2021 Device Overview:
The Redmi Note 8 2021 features a 6.3-inch IPS LCD panel with a resolution of 1080 x 2340 pixels and an aspect ratio of 19.5:9. It is a standard 60 Hz panel protected by Corning Gorilla Glass 5. Under the hood, we have the MediaTek Helio G85 processor built on a 12nm manufacturing process. It is an octa-core processor with two Cortex-A75 cores clocked at 2.0 GHz and six Cortex-A55 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Mali-G52 MC2.
In terms of optics, we have a quad-camera setup at the rear and a single camera setup at the front. The rear setup consists of a 48MP primary sensor paired with an f/1.8 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, a 2MP macro sensor paired with an f/2.4 lens, and a 2MP depth sensor paired with an f/2.4. The single selfie sensor is a 13MP sensor paired with an f/2.0 lens. Both the front and rear camera setups are limited to 1080p video recording.
We get two storage options for this device: 4GB RAM + 64GB internal storage and 4GB RAM + 128GB internal storage. There is also a dedicated slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.2, GPS, Infrared, FM radio and USB Type-C 2.0. And for sensors, we have a rear-mounted fingerprint sensor, accelerometer, gyro, proximity, and compass. Powering it all is a 4000 mAh cell that can be topped up quickly using an 18W fast charging adapter. The smartphone is available in three color options: Neptune Blue, Moonlight White, and Space Black.
Also Read
Advantages of Download Agent Loader Files
- Bypass Factory Reset Protection (FRP Lock) on the Redmi Note 8 2021
- System Image backup of the Redmi Note 8 2021
- Read security codes of an MTK device
- Can flash new firmware on a Redmi Note 8 2021
- Clone a Recovery Image or boot files
Disclaimer:
Download Link:
- Redmi Note 8 2021 (biloba) DA File
(File contains: mtk_allinone_da.bin) - Download SP Flash Tool
Pre-requirements:
- This DA file is supported for the Redmi Note 8 2021 devices only.
- You’ve to download the DA file for your Redmi Note 8 2021 devices from the link above.
- A PC/Laptop and a USB cable are required.
Steps to Install Redmi Note 8 2021 (biloba) DA File
Method 01: Use NCK Box
- Download NCK Pro Box | NCK Pro Box Drivers – Install both on your PC
- Launch the NCK box on your PC > Click on FRP-PATTERN-PRIVACY-RESET.
- Click to select Custom Loader.
- Then head over to the DA file and select the downloaded DA file.
- Click on Flash Mode.
- Next, open NCK Loader > Click on Settings.
- Head over to the DA file and select the downloaded DA file.
- Go back to the Service tab > Click on Reset.0
- Y0ur Redmi Note 8 2021 will now reboot with a reset FRP lock system
For a complete step by step guide on how to install DA files using NCK Pro Box
Method 02: Use SP Flash Tool
- Launch the SP Flash Tool on your PC.
- Click on the Download tab.
- Click on the Choose option and select the downloaded DA file.
- The DA file will load automatically and install.
For a complete step by step guide on how to install the DA file using the SP Flash tool
Method 03: Use Miracle Box
For a complete step by step guide on how to install the DA file using Miracle Box
That’s it, guys. We hope you’ve successfully installed the DA file on your Xiaomi Redmi Note 8 2021 devices. For any queries, feel free to ask in the comments below.