Xiaomi Redmi Note 9 Pro Flash File (Stock Firmware | Android 11 & 12)

Xiaomi Redmi Note 9 Pro was launched in the year 2020 with Android 10 out of the box. The device is promised to get an Android 11 update in the future. If you’re using the Redmi Note 9 Pro or planning to buy it, you should check out this article for once. Here we have shared the list of all Xiaomi Redmi Note 9 Pro Stock Firmware flash files which you can use to revert back to stock ROM or fix many bugs.

It’s worth mentioning that the Redmi Note 9 Pro only launched in India, Europe, and other Asian regions which include China, Indonesia, and more. We all know that Android is an open-source platform based on Linux and can easily be customized or tweaked. Most of the Android users only love the OS due to its customizations only. However, improper way of customizations or flashing incompatible files can cause your device to brick easily. In some cases, installing the Custom Firmware, Root, or mod files may slow down the device performance or bring any other software issues. But you can easily fix all of the software-related issues or boot loop issues by installing the Stock ROM again on your device.

If you’re using the Redmi Note 9 Pro and facing any issues like software performance decrease, battery draining, slow charging, network issue, app force close, and more, flash the Stock Firmware. Here we have shared all the update lists, pre-requirements, and installation steps below. But before going to the topic, check out the Xiaomi Redmi Note 9 Pro specifications and Stock Firmware advantages below.

Xiaomi Redmi Note 9 Pro Specifications: Overview

The Xiaomi Redmi Note 9 Pro sports a 6.67 inch IPS LCD display with a Full HD+ resolution. It has a screen-to-body ratio of 84.5 percent, it can blow up to 450 nits, an aspect ratio of 20:9, a pixel density of 395 Pixel Per Inch ( PPI ). It is protected by Corning Gorilla Glass 5 to the front and rear of the device. Further, it also has splash resistance and a plastic frame.

Underneath the new Note 9 Pro, it sports the latest Qualcomm Snapdragon 720G with 4GB and 6GB of RAM variants. It is also available in 64GB and 128GB of UFS 2.1 internal storage. Talking about optics, the Redmi Note 9 Pro has a quad rear camera set up with a primary 48MP sensor, 8MP secondary ultra-wide-angle sensor, 5MP tertiary macro sensor, and finally another 2MP depth sensor. To the front, it has a 16MP unit with an f/2.0 aperture value. This front camera sits inside the punch hole which the brand calls as the DotDisplay.

This new device from Xiaomi comes with a 5020 mAh battery and this charges over the USB type c port. This massive battery also supports 18W fast charging tech i.e. the QC 3.0 tech. The device is running on MiUi 11 which is based on the latest Android 10. It has a physical fingerprint scanner to the side and also has support for face unlock. Redmi still retains the headphone jack in this device and comes with a single speaker setup. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot. Bluetooth 5.0, A2DP, LE. GPS with A-GPS, GLONASS, GALILEO, BDS, NavIC, infrared port, FM radio. USB 2.0, Type-C 1.0 reversible connector. Other sensors include an accelerometer, gyro, proximity, and compass.

Redmi Note 9 Pro Stock Firmware

The Stock Firmware of Xiaomi devices (MIUI) and each & every Stock ROM comes by default on a device by the smartphone OEMs with some limited customizations and options. Therefore, the Stock ROM always offers better system performance, smoothness, and stability than third-party ROMs.

While Custom Firmware comes with so many customizations, functionalities that visually impress any user. But they offer so many bugs, stability issues, and more. You can’t really use any Custom ROM as a daily driver as compared to the Stock ROM.

You may also get screen freezing, touch unresponsive, camera error, boot loops, slow performance, OTA update issue, battery draining, network dropping issue, etc. If you’re facing these kinds of issues on your Redmi Note 9 Pro, then you should simply install the Stock ROM again. Check out the advantages of Stock Firmware below.

Advantages of Stock Firmware

• Flash Stock To Unbrick your device
• Install Stock ROM to fix the device boot loop issue
• Upgrade or Downgrade Redmi Note 9 Pro Stock Firmware
• Unroot or Fix Bugs on your phone
• Fixes the lag or stutter on Redmi Note 9 Pro
• Can fix software update (OTA) issue
• Get back your device warranty (if applicable)

List of Redmi Note 9 Pro Stock Firmware Collections

Steps to Install Stock Firmware on Xiaomi Redmi Note 9 Pro

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requirements:

• The ROM file is supported only for Redmi Note 9 Pro. Don’t try it on other devices.
• You will require a PC/Laptop and a USB Cable.
• Download and Install the latest Xiaomi USB Driver for PC.
• Mi Flash tool – Download and install it on your PC (Fastboot Method).
• Keep your device battery charged up to 60% at least for a smoother process.
• Take a complete backup of your phone data as well.

Instructions to install

In order to install MIUI Stock ROM on Xiaomi Redmi Note 9 Pro, we have provided two methods, either you can follow the Recovery method or the fastboot method. You will find a detailed guide on both methods in a link which is given below:

Guide to Install Stock ROM on any Xiaomi Device

For better visual support, you can also check out our full-depth video tutorial from the link below as well:

We hope that you have successfully installed the latest update on your Xiaomi device by following this guide easily. Feel free to write down in the comments below.