Destiny 2 Lightfall Best Graphics Settings for 4090, 4070, 3070, 3080, 3090, 1060, 1070, 2060, 2080, and More

Bungie did recently release a new DLC (Downloadable Content) called ‘Lightfall‘ under the base game Destiny 2 which is an action massively multiplayer online game in a single evolving world. As this is an MMO title, you’ll be able to join your friends anytime and anywhere for free. Though the base game is almost perfect in all aspects, the new DLC has some issues with the performance. Meanwhile, you can check Destiny 2 Lightfall Best Graphics Settings for Nvidia 4090, 4070, 3070, 3080, 3090, 1060, 1070, 2060, 2080, and More.

This action FPS MMO title basically allows players to use a wide range of weapons and different locations to get into the vast gaming experience whatsoever. But it’s quite unfortunate that the game is hungry for higher system resources and you might require a compatible PC configuration along with the optimized in-game graphics settings to be able to run Destiny 2 Lightfall. So, if you’re also searching for the best-optimized graphics settings to achieve 60 FPS or higher, you can check this full guide.

It looks like that somehow you’re experiencing low gaming performance due to a low-end graphics card on your PC which is common. But if you tweak some of the in-game graphics settings, you’ll be able to get better FPS and low stutters up to some extent which isn’t a bad idea at all. Although in-game graphics quality will be reduced, you’ll be more than happier to play games with higher smoothness instead of higher visuals. Obviously, visual quality matters but we’re talking about budget-friendly builds.

Destiny 2 Lightfall Best Graphics Settings for 4090, 4070, 3070, 3080, 3090, 1060, 1070, 2060, 2080, and More

Destiny 2 Lightfall Best Graphics Settings for 4090, 4070, 3070, 3080, 3090, 1060, 1070, 2060, 2080, and More

You should always check for the graphics settings in the Destiny 2 Lightfall game on your PC to cross-check if the problem bothering you or not. While your PC configuration can also be a reason behind the incompatibility issue with the system requirements of the game to run properly. For example, if you’re using an Intel chipset and a dedicated graphics card like Nvidia GTX or RTX series then you may get a better gaming experience with some tweaks.

Here we’ve shared the best graphics settings for Destiny 2 Lightfall and all the potential workarounds that should come in handy. So, without wasting any more time, let’s get into it.

1. Check System Requirements

Before getting to any other conclusion, make sure to check out potential workarounds or in-game graphics settings adjustments by following the methods below. First, you should cross-check the system requirements of the Destiny 2 Lightfall game to ensure your PC configuration is compatible enough.

Minimum Requirements Recommended Requirements
OS: Windows 7 / Windows 8.1 / Windows 10 64-bit (latest Service Pack) OS: System Windows 7 / Windows 8.1 / Windows 10 64-bit (latest Service Pack)
Processor: Intel Core i3 3250 3.5 GHz or Intel Pentium G4560 3.5 GHz / AMD FX-4350 4.2 GHz Processor: Intel Core i5 2400 3.4 GHz or i5 7400 3.5 GHz / AMD Ryzen R5 1600X 3.6 GHz
Memory: 6 GB RAM Memory: 8 GB RAM
Graphics: NVIDIA GeForce GTX 660 2GB or GTX 1050 2GB / AMD Radeon HD 7850 2GB Graphics: NVIDIA GeForce GTX 970 4GB or GTX 1060 6GB / AMD R9 390 8GB Memory 8 GB RAM
Storage: 105 GB available space Storage: 105 GB available space
Network: Broadband Internet Connection Network: Broadband Internet Connection

2. Get a Minimum of 60 FPS with Optimal Graphics Settings

If you’re using an outdated or low-end PC configuration then tweaking the graphics settings in the Destiny 2 Lightfall game might help you to achieve an increased FPS count.

  • Anti-aliasing: SMAA
  • Screen space ambient occlusion: HDAO
  • Texture anisotropy: 16x
  • Texture quality: Medium
  • Shadow quality: Low
  • Depth of field: High
  • Environment detail distance: Medium
  • Character detail distance: High
  • Foliage detail distance: Medium
  • Foliage shadows distance: Medium
  • Lights shafts: Medium
  • Motion blur: Off
  • Wind impulse: On
  • Render resolution: 100%
  • Chromatic aberration: Off
  • Film grain: Off

3. Disable Mouse Acceleration on Windows

A mouse acceleration feature improves the motion or movement of the mouse cursor/pointer on the screen. So that you won’t feel any lag or jitter while moving the mouse pointer on the screen here & there. By disabling the mouse acceleration option on the system, you’ll be able to reduce the motion blur or jitter of the mouse pointer movement while gaming which can also help reduce in-game stutters. To do that:

  • Click on the Windows logo on the taskbar.
  • Type mouse settings in the Start menu search bar.
  • Click on Change your mouse settings > Click on Additional mouse options.
  • Now, select the Pointer Options tab.
  • Make sure to Uncheck the Enhance Pointer Precision box.
  • Click on Apply and then OK to save changes.

4. Adjustments for Nvidia Control Panel

You can head over to the Nvidia Control Panel application and try making the following adjustments to ensure your game runs slightly better without screen tearing.

  • V-Sync (Vertical Sync) – OFF
  • Tripple buffering – ON
  • Maximum pre-rendered frames – 1

5. Update Graphics Drivers

You should try checking for the graphics driver update on your Windows PC and installing the latest version to ensure no update is pending. An outdated or missing graphics driver can trigger issues with properly functioning graphics-intensive programs. To do that:

  • Right-click on the Start Menu to open up the Quick Link Menu.
  • Click on Device Manager from the list.
  • Now, double-click on Display adapters to expand it.

Device Manager Update Display Adapter

  • Then right-click on the dedicated graphics card name you’re using to bring the context menu.
  • Next, click on Update driver > Choose Search automatically for drivers.
  • The system will automatically check for the available update.
  • If an update is available, it’ll automatically download and install the latest version.
  • Once done, make sure to restart your PC to apply the changes.

If you can’t find any pending updates then just head over to the official website of Nvidia website below and search manually for the latest update. If a new version is available for the graphics card, just download the driver and install it on your PC. You can jump to the link below to do so:

6. Switch to a Dedicated GPU

Sometimes the game may run with the integrated HD graphics on the PC that comes with the processors to handle minimal graphics tasks. But if you’re using an external Nvidia graphics card then make sure to switch the Destiny 2 Lightfall game to the dedicated GPU by following the steps below.

  • Right-click on the desktop screen to open the context menu.
  • Now, click on Nvidia Control Panel to open it.
  • Head over to 3D Settings > Select Manage 3D Settings.
  • Open the Program Settings tab > Choose Destiny 2 Lightfall from the drop-down menu.
  • Next, select the preferred graphics processor for this program from another drop-down menu.
  • Finally, your Nvidia GPU should show as High-Performance Nvidia Processor.
  • Save the changes and reboot the PC.

7. Check for Game Updates

According to multiple reports, corrupted or damaged game files can cause a wide variety of problems and errors with game launching or gameplay. Mostly updating the game can resolve these issues in a jiffy.

For Steam:

  • Open the Steam client > Go to Library.
  • Click on Destiny 2 Lightfall from the list of installed games on the left pane.
  • Now, the client will automatically search for the available update.
  • If there is an update available, click on the Update option.
  • Wait for a couple of minutes or so until the game update completes. [Depends on the storage space and internet connectivity]
  • Once done, make sure to close the Steam client.
  • Finally, reboot your PC to apply changes, and launch the game again.

For Epic Games Launcher:

  • Open the Epic Games Launcher > Head over to Library.
  • Now, click on the three dots icon next to Destiny 2 Lightfall.
  • Make sure the Auto Update option is turned on.

8. Verify and Repair Game Files

If in case there is an issue with the game files and they somehow get corrupted or missing, then make sure to perform this method to easily check for the issue.

For Steam:

  • Launch the Steam client > Click on Library.
  • Right-click on Destiny 2 Lightfall from the list of installed games.
  • Now, click on Properties > Go to the Local Files files.

  • Click on Verify Integrity of Game Files.
  • You’ll have to wait for the process until it gets completed.
  • Once done, just restart your computer.

For Epic Games Launcher:

  • Open the Epic Games Launcher > Click on Library.
  • Click on the three-dots icon next to Destiny 2 Lightfall.
  • Click on Verify > Wait for the process to complete and restart the launcher.

9. Close Background Running Tasks

Unnecessary background running tasks or programs can eat up a lot of system resources like CPU or Memory usage literally reducing system performance. Hence, the startup crashing, lagging, and not loading issues appear quite often. Simply, close all the unnecessary background running tasks completely. To do this:

  • Press the Ctrl+Shift+Esc keys to open up the Task Manager.

End Task Manager

  • Now, click on the Processes tab > Click to select tasks that are unnecessarily running in the background and consuming enough system resources.
  • Click on End Task to close them one by one.
  • Once done, restart your system.

Now, you can check whether you’ve fixed Destiny 2 Lightfall performance issues on your PC or not. If not, follow the next method.

10. Set High Priority in Task Manager

Make your game priority in the higher segment via the Task Manager to tell your Windows system to run the game properly. To do this:

  • Right-click on the Start Menu > Select Task Manager.
  • Click on the Processes tab > Right-click on the Destiny 2 Lightfall game task.
  • Select Set Priority to High.
  • Close Task Manager.
  • Finally, run the Destiny 2 Lightfall game to check if it still has low FPS on the PC or not.

11. Disable Windows Firewall or Antivirus Program

The chances are that maybe your default Windows Defender Firewall protection or any third-party antivirus program is preventing the ongoing connections or game files from running properly. So, temporarily disable or turn off the real-time protection and firewall protection. Then you should try running the game to check if Destiny 2 Lightfall’s low FPS issues on the PC have been fixed. To do this:

  • Click on the Start Menu > Type firewall.
  • Select Windows Defender Firewall from the search result.
  • Now, click on Turn Windows Defender Firewall on or off from the left pane.

  • Select the Turn off Windows Defender Firewall (not recommended) option for both the Private & Public Network Settings.

  • Once selected, click on OK to save changes.
  • Finally, restart your computer.

Similarly, you have to turn off the Windows Security protection too. Just follow the steps below:

  • Press the Win+I keys to open the Windows Settings menu.
  • Click on Update & Security > Click on Windows Security from the left pane.

Windows Security

  • Now, click on the Open Windows Security button.
  • Go to Virus & threat protection > Click on Manage settings.

C:\Users\PC\Desktop\Virus & threat protection Windows 11.png

  • Next, you’ll need to simply turn off the Real-time protection toggle.
  • If prompted, click on Yes to proceed further.
  • Additionally, you can also turn off cloud-delivered protectionTamper protection if you want.

12. Set High Performance in Power Options

If, in case, your Windows system is running on the Balanced mode in Power Options, just set the High-Performance mode for better results. Although this option will take higher power usage or battery usage. To do this:

  • Click on the Start Menu > Type Control Panel and click on it from the search result.
  • Now, go to Hardware and Sound > Select Power Options.
  • Click on High Performance to select it.
  • Make sure to close the window and fully shut down your computer. To do this, click on the Start Menu > Go to Power > Shut Down.
  • Once your computer is fully turned off, you can power it on again.

This should fix Destiny 2 Lightfall performance-related issues on your PC in most cases. However, if none of the methods worked for you, follow the next one.

13. Try Disabling Overlay Apps

It seems that a couple of popular apps do have their own overlay program that can eventually run in the background and cause issues with the gaming performance or even launching issues. You should turn them off to fix the issue by following the steps below:

Disable Discord Overlay:

  • Launch the Discord app > Click on the gear icon at the bottom.
  • Click on Overlay under App Settings > Turn on the Enable in-game overlay.
  • Click on the Games tab > Select Destiny 2 Lightfall.
  • Finally, turn off the Enable in-game overlay toggle.
  • Make sure to reboot your PC to apply changes.

Disable Xbox Game Bar:

  • Press the Win+I keys to open Windows Settings.
  • Click on Gaming > Go to Game Bar > Turn off Record game clips, screenshots, and broadcast using Game bar option.

If in case, you’re unable to find out the Game Bar option then just search for it from the Windows Settings menu.

Disable Nvidia GeForce Experience Overlay:

  • Launch the Nvidia GeForce Experience app > Head over to Settings.
  • Click on the General tab > Disable the In-Game Overlay option.
  • Finally, restart the PC to apply changes and launch the game again.

Also, do keep in mind that you should disable some other overlay apps like MSI Afterburner, Rivatuner, RGB software, or any other third-party overlay apps that run in the background always.

Bonus: If you don’t want to mess with the in-game graphics settings, you can open the Nvidia GeForce Experience app. Then click on Optimize to get the optimized Destiny 2 Lightfall Settings immediately without manually adjusting graphics options.

That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.