Fix: God of War Ragnarok Screen Flickering and Tearing on PS4 and PS5

God of War Ragnarök is an action-adventure video game developed by Santa Monica Studio and published by Sony Interactive Entertainment. The game is now released for the PS4 and PS5 globally, but the chances are high that some players are facing God of War Ragnarok Screen Flickering and Tearing issues on their PS4/PS5 consoles.

Now, if you’re also one of the victims, then you can follow this troubleshooting guide to resolve it. Some proud PS4/PS5 console users might think that even a powerful next-gen gaming console in the PlayStation family faces multiple issues with video games. But your game may be conflicting with the console firmware or incorrect settings, troubling you a lot. So, without wasting any more time, let’s jump into it.

Fix: God of War Ragnarok Screen Flickering and Tearing on PS4 and PS5

Fix: God of War Ragnarok Screen Flickering and Tearing on PS4/PS5

As per multiple online reports, God of War Ragnarok game is encountering screen flickering or tearing issues due to the game file-related conflicts on the PS4/PS5 console. Luckily, some possible workarounds mentioned below should resolve the issue for you. make sure to follow all methods until the problem gets fixed because even a simple workaround can help you.

1. Reboot the PS4/PS5 Console

Before jumping into any other troubleshooting, you should manually restart the PS4/PS5 console to ensure that there is a temporary system glitch or not. Sometimes a normal reboot can fix several issues. To do so:

  • Tap the X button on your PlayStation 5 DualSense controller on the Power menu icon.
  • Choose the third option Restart PS4/PS5, and confirm using the controller to reboot it.

2. Power Cycle the PS4/PS5 Console

If all of the console cables are working fine, then make sure to perform a power cycle method on your PS4/PS5 console by following the steps below:

  • Fully switch off the PS4/PS5 console by holding the Power button for a few seconds.
  • Next, wait for the LED indicator to stop flashing > Remove the power cable from the console.
  • You’ll have to wait for another 20 minutes > Reconnect the power cable and turn on the console.

3. Boot PS4/PS5 in Safe Mode

Safe Mode is one of the recovery or accessibility modes on the PlayStation console to debug problematic issues or install programs easily. You can follow the steps below to start your PS4/PS5 console in Safe Mode:

  • Turn Off your PS4/PS5 console by holding the Power button on the console for three seconds.
  • The power indicator will blink for a few moments and then turn off.
  • Now, make sure to press and hold the Power button again.
  • Release the Power button once you hear the second beep sound, which will be heard after seven seconds of the first beep sound.
  • Once done, connect the controller with the USB cable > Press the PS button on the controller.

You can restart the console if you want to go back to normal mode or exit the safe mode.

4. Try Changing the 4K Video Transfer Rate

It’s also worth changing the 4K video transfer rate on the PS4/PS5 console to completely reduce the screen flickering or tearing issue. To do this:

  • Go to the Settings menu on your PS4/PS5 > Choose Screen and Video.
  • Select Video Output from the left pane.
  • Now, set your 4K Video Transfer Rate to -1 > Restart your console to apply changes.

If in case, the issue is still bothering you, then you can try changing the transfer rate to the -2 value and rebooting the console.

5. Adjust Screen and Video Settings on PS4/PS5

Multiple PS4/PS5 users have found this method useful by tweaking the display resolution, disabling HDCP and HDR, changing RGB settings, etc. Additionally, if your TV or Monitor supports HDR mode, try turning it off.

Disable HDR:

  • Go to your PS4/PS5 Settings > Choose Screen and Video.
  • Select Video Output from the left pane.
  • Change the HDR option to Off.

Disable HDCP:

  • Go to your PS4/PS5 Settings > Go to System.
  • Choose HDMI from the left pane.
  • Turn Off the Enable HDCP option.

Change RGB Settings:

  • Go to the Settings menu from the PS4/PS5 Home screen.
  • Head over to Screen and Video > Select Video Output.
  • Select the RGB Range option at the bottom.
  • Now, select Limited or Full.

Change Screen Resolution:

  • Go to Settings on the console > Select Screen and Video.
  • Select Video Output from the left pane.
  • Try changing or lowering the screen resolution as per your preference.

6. Check for Faulty HDMI Cable

Check for the faulty HDMI cable on the PS4/PS5 console because connectivity or the video transfer rate issue with the HDMI cable may trouble you a lot. An incompatible HDMI cable from a cheap local brand might also conflict with the proper display connectivity. Try using another HDMI cable to check for the issue.

7. Update PS4/PS5 Firmware

You should also check for the PlayStation 5 system update because an outdated firmware version can trouble you a lot in terms of the performance and program running. If an update is available, make sure to install the same by following the steps below.

  • Ensure that your console is connected to the internet.
  • Go to Settings on the PS4/PS5 home screen > Select System.
  • Choose System Software > Select System Software Update and Settings.
  • Select Update System Software > If an update is available, the PS4/PS5 console will automatically install it.
  • Once done, your console system may reboot automatically to apply changes.

8. Check for Monitor or TV Firmware Update

If you haven’t updated your TV or Monitor firmware for a while, the chances are high that your display device firmware becomes outdated enough to cause multiple conflicts. Though monitor or TV devices don’t receive frequent updates, some specific models or gaming series may be exceptional. Most popular manufacturers do offer periodic software updates and bug fixes on their eligible TVs and monitors. To check for the same:

  • Head over to your TV/Monitor’s Settings menu. [Some devices do have Help or a dedicated Software Update option]
  • Find out the About or Software Update.
  • Now, select it to check for the available updates.
  • If there is an update available, make sure to follow the on-screen instructions to complete the update.
  • It may take some time to install the same, and your TV/Monitor will reboot automatically.

9. Check God of War Ragnarok Update

An outdated game version can always trouble you more than anything else because it might have some bugs or stability issues. So, it’s always recommended to check for the latest update and install the same to get stability as well as gaming performance or new features. To do so:

  • Go to the Library section on your PS4/PS5 > Choose God of War Ragnarok game.
  • Press the Options button > Select Check for Update.
  • If there is an update available, make sure to install the update.
  • Once done, reboot the console to apply changes.

10. Clear God of War Ragnarok Game Data

Mostly issues with the corrupted game data or temporary cache data can trouble you with the game launching as well as the screen flickering. It’s better to clear out the game data on the PS4/PS5 console by following the steps below to cross-check the issue.

  • Go to Settings on the PS4/PS5 console > Select Application Saved Data Management.
  • Choose either System Storage or Online Storage or USB Storage > Select Delete.
  • Select God of War Ragnarok game > Tickmark the files that you want to delete or just Select All.
  • Choose Delete > Select OK to confirm it.
  • Once done, reboot your PS4/PS5 console to apply changes.

11. Rebuild Database (PS4/PS5)

Sometimes rebuilding the console database can also quickly fix the issue which is related to the system. You can follow the steps below to do so:

  • Power Off your PS4/PS5 console and unplug the power cable from the console.
  • Ensure to wait for around 2-3 minutes > Plug in the power cable.
  • Turn On the console and then Clear the Cached Data automatically.

Check whether the problem has been fixed or not. If not, you can follow the next steps below.

  • Press and hold the Power button on the PlayStation 5 console until you hear 2 beeps. [The second beep will sound after seven seconds]
  • The console will boot in Safe Mode > Connect the controller to the USB with the console.
  • Press the PS Button on the controller > Select Rebuild Database and confirm the task.
  • Depending on the hard drive data size, it may also take some time. So, please wait for it.
  • Once done, reboot the console.

12. Don’t Put in Rest Mode

By default, the PS4/PS5 console system may use the Rest Mode after the inactivity for some time to save power. It’s also considered the sleep mode. Make sure not to keep your PlayStation console in the rest mode because it may cause issues with the game launching or screen conflicts. To do so:

  • Go to the PS4/PS5 Settings menu > Open the Power Saving option.
  • Select Set Time Until PS4/PS5 Enter Rest Mode.
  • Set to Don’t Put in Rest Mode > Restart the console to apply changes.

13. Contact PlayStation Support

If none of the methods worked for you, then contact PlayStation Support for further assistance. You should create a support ticket for the same and provide the required information to investigate the problem properly.

That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.