Huawei Enjoy 20 Plus 5G FRL-AN00a Firmware File | How to Flash Stock ROM

Huawei Enjoy 20 Plus 5G
Advertisements

Huawei Enjoy 20 Plus 5G was launched in the year 2020 which came out of the box with Android 10 under EMUI 10.1 skin. It is powered by a MediaTek MT6853V Dimensity 720 5G processor. In this tutorial, we will guide you on how to install the firmware flash file on Huawei Enjoy 20 Plus 5G FRL-AN00a.

To install the firmware flash file on Huawei Enjoy 20 Plus 5G FRL-AN00a, you need to download the software called the Huawei Flash tool. This method simple and easy.

Huawei Enjoy 20 Plus 5G FRL-AN00a Firmware File | How to Flash Stock ROM

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Huawei Enjoy 20 Plus 5G FRL-AN00a Stock ROM flash file on your computer.

Advertisements
  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Huawei Enjoy 20 Plus 5G
  • You can fix the boot loop issue on the Huawei Enjoy 20 Plus 5G
  • Fix Unfortunately, the app has stopped error on Huawei Enjoy 20 Plus 5G
  • Fix Network related issue
  • Patch Boot image to Root using Magisk
  • You can unroot Huawei Enjoy 20 Plus 5G
  • To Reset or Remove FRP on your device
  • Restore Huawei Enjoy 20 Plus 5G back to Factory State

Huawei Enjoy 20 Plus 5G FRL-AN00a Firmware Flash Files:

  • Flash File Name: FRL-AN00a 10.1.1.157(C185E10R8P1)
  • File Size: 5 GB
  • Download Link: Click Here

Steps to Install Huawei FRL-AN00a Firmware Flash File

If you have downloaded the firmware, then follow this guide to flash the stock firmware manually on your Huawei Enjoy 20 Plus 5G FRL-AN00a. Make sure to follow the steps carefully.

Pre-Requirements:

Disclaimer:
GetDroidTips will not be held responsible for any kind of hardware or software damage to your device by following this guide. Proceed at your own risk

Firmware Installation Guide:

Check out the firmware flashing guide below for the Huawei Enjoy 20 Plus 5G FRL-AN00a.

1. SD Card Update Method

  • Create a new folder called dload on your MicroSD card.
  • Extract the downloaded firmware zip file on PC > Copy the UPDATE.APP file into the dload folder on your MicroSD card.
  • Switch off your handset > Long-press Vol Up + Vol Down + Power key together for a few seconds until the fastboot mode appears.
  • You’ll see ‘Installing system update’ > Wait for a while > Your device will automatically reboot after flashing.

2. Manually Flash Stock ROM

  1. First of all, Download and extract the Huawei smartphone Multi Download Tool on your computer.
  2. Now, Download and Install the Huawei Handset Product Line Driver and Huawei USB Driver your PC.
  3. Launch the QPBLFBML01.exe file to open the Huawei Multi-Download Tool.
  4. Next, you will see the XML firmware file upload option.
  5. Click on the Browse button (three-dot icon) and it will ask for the password.
  6. Don’t put anything, just leave it blank and click on the Set button.
  7. Now, select the .xml firmware file for your device and click on Open.
  8. Then click on the Next button.
  9. You will see the installation progress page. Connect your device via a USB cable with the Fastboot or Download Mode.
  10. Next, click on the Scan&Download button to start flashing the stock firmware.
  11. It will automatically detect the Fastboot device and will take some time to install it.
  12. Once flashing done, restart your device.
Full Instruction Guide

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Previous Post

How to Bypass iCloud Activation Lock On Your iPhone?

Next Post
Treble AB GSI Custom ROM Sony Xperia 1 II

Download and Install crDroid OS on Sony Xperia 1 II (Android 11 R)

Related Posts