Moto E6 Play Stock Firmware Collections [Stock ROM flash file]

Advertisements

The Moto E6 Play is another entry-level budget smartphone from Motorola, A Lenovo Company. The handset is equipped with a good battery, an HD+ display, a good looking design overview, and more. It was launched in November 2019 that offers plastic body, Dual Nano-SIM support, quad-core processor, etc. It’s expected that the device will stand out well and compete with other budget category models like Xiaomi, Realme, Nokia, etc. Well, do you want to install Stock ROM on Moto E6 Play (codenamed bali)? then, you are in the right place.

Here we are sharing all the latest Moto E6 Play Stock Firmware Collections. As we know, Android is one of the highly customizable software and there is a possibility that we may end up in a situation of lag, boot loop or soft brick. Then, this guide will be helpful. It is always good to keep the Moto E6 Play stock firmware with you in case something went wrong.

If anyone faces problems like Screen freezing, unresponsive Touch, camera fail or boot loop, you can factory reset or flash the latest Moto E6 Play Stock Firmware. Check the other advantage of the Stock Firmware given below.

If you have bought this device and looking for the fresh installation of Stock ROM, then you can simply grab the download link and flash the firmware on your phone by following the guide.

Advertisements

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. These feats can be achieved by providing root access to your device or simply rooting your phone.  In today’s date, rooting or customizing is no rocket science, but people perform these processes carelessly. Certain users hastily carry out the modding/rooting process without properly following instructions. It leads to the bricking of the device. It can happen with any device. In this post, we will tell you how you can restore or unbrick Moto E6 Play back to the previous working condition.

Moto E6 Play Stock Firmware Collections [Stock ROM flash file]

Moto E6 Play Specifications:

The device comes with a 5.5-inches IPS LCD display with HD+ 720×1440 pixels resolution. It also has an 18:9 aspect ratio screen and 295 PPI pixel density. The handset runs on Android 9.0 Pie with stock Android UI. It’s powered by the MediaTek MT6739 SoC, paired with PowerVR GE8100 GPU, 2GB RAM, 32GB of internal storage option (expandable up to 256GB via a MicroSD card). It’s backed by a 3,000mAh battery and the best part is that the battery is removable as well.

The phone sports a 13MP rear camera with an f/2.2 aperture lens that features PDAF, Panorama, HDR, an LED flash, etc. On the front side, the device packs a 5MP selfie camera (f/2.2) with HDR mode. The device includes a 3.5mm audio jack, Wi-Fi 802.11 b/g/n, Bluetooth 4.2, GPS, A-GPS, GLONASS, FM Radio, MicroUSB 2.0, USB OTG, etc. While the handset also features some of the major sensors like a rear-mounted fingerprint sensor, an ambient light sensor, an accelerometer, a proximity sensor, etc.

The Advantage of Stock Firmware

  • Flash Stock To Unbrick your Moto E6 Play
  • Flash Stock ROM to Fix the bootloop problem
  • Upgrade and Downgrade Moto E6 Play
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Moto E6 Play
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Download Moto E6 Play Stock ROM:

Mexico Model – XT2029-1:

Europe RETEU XT2029-2:

Retail:

    Steps to Install Moto E6 Play Stock Firmware:

    Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

    Pre-Requisites:

    [su_note note_color=”#fbf5c8″ text_color=”#000000″]

    Advertisements

    Disclaimer: We at Getdroidtips.com cannot be held responsible if anything goes wrong. Take your own risk!

    [/su_note]

    Instructions to Install: via ADB Sideload Method

    1. Now go to the folder where you have extracted the ADB and Fastboot Tools
    2. Download Stock ROM for Moto from the above list of Moto Stock Firmware Collections and save it in the ADB folder.
    3. Now Reboot Moto smartphone to Recovery Mode.
    4. Select Apply Update from ADB.
    5. Plug the phone into PC using USB Cable, then open a command prompt window by pressing Shift Key + Right Mouse Click
      AMD COMMAND
    6. Now execute the below command in CMD screen.
      adb sideload Filename.zip
    7. Wait until the installation process Completes.
    8. Once the installation completed. Reboot the Phone.

    That’s it! Wait patiently until the flashing process completes. If you have any queries related to the flashing process. Please leave a comment down below.

    Manually Update Moto E6 Play Stock Firmware via Recovery

    1. First of all, Go to Settings –> About Phone –> Tap on Build Number 7 Times.
    2. Go to Developer Options –> Enable USB Debugging.
    3. Download Android Nougat for Moto from above and save it in Internal storage.
    4. Now Reboot Moto to Recovery Mode.
    5. Select Apply Update from SD Card.
    6. Select the Downloaded ZIP file from SD Card.
    7. Wait until the installation process Completes.
    8. Once the installation completed. Reboot the Phone.

    That’s it!! You have successfully installed Stock Firmware On Moto E6 Play Smartphone.

    I hope you installed the Stock ROM on Moto E6 Play (bali) successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

    Advertisements

    Comments

    1. Esse Explicação ta muito mal feita , poderia ter um passo a passo de como ser feito . “nome do arquivo que arquivo se refere ? como coloco o E6 play xt2029-1 em modo de recuperação.?

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.