Motorola Moto G9 Power Stock Firmware Collections [Back To Stock ROM]

On this page, we have shared the download link and guide to install the Moto G9 Power (cebu) firmware flash file using the ADB Fastboot method. To flash the Moto G9 Power back to stock ROM, you need the stock firmware zip files which you will find here.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Motorola Moto G9 Power Stock Firmware Collections

Moto G9 Power Specifications:

The Moto G9 Power features a 6.8-inch display with an HD+ resolution of 720 x 1640 pixels. There is nothing fancy about this display despite the huge size. We get the Qualcomm Snapdragon 662, which is built on an 11 nm manufacturing process under the hood. This is an octa-core processor from Qualcomm, which features four Kryo 260 Gold cores clocked at 2.0 GHz and four Kryo 260 cores clocked at 1.8 GHz.

We get only a single storage and RAM variant with 4GB of RAM and 128GB of internal storage. There is a hybrid sim slot for storage expansion too. The phone features a triple camera setup at the back consisting of a 64MP primary sensor with an f/1.8 lens, a 2MP macro sensor with an f/2.4 lens, and a 2MP depth sensor with an f/2.4 lens. Coming to the front, we see a 16MP primary sensor with an f/2.2 lens. Both the front and back camera systems are capable of capturing only 1080p videos.

Coming to communications, we have Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS,  NFC, FM radio, and USB Type-C 2.0. Inside the Moto G9, we have a huge 6,000 mAh battery, the USP of the device. That is where the word Power comes from. This huge cell supports up to 20W fast charging. The Motorola Moto G9 power is available in two color options: Electric Violet and Metallic Sage.

Advertisements

The Advantage of Stock Firmware

  • Flash Stock To Unbrick your Moto G9 Power
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Moto G9 Power
  • Unroot or Fix Bugs on your Phone
  • To fix the lag or stutter on Moto G9 Power.
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Steps to Install Moto G9 Power Stock Firmware:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requisites:

Disclaimer

We at Getdroidtips.com cannot be held responsible if anything goes wrong. Take your own risk!

Download Flash Files:

Moto G9 Power Stock Firmware RETLA XT2091-4:

Flash File Name: RZCS31.Q2-57-12-10
Model: XT2091-4
Android Version: 11
Download
Flash File Name: RZCS31.Q2-57-12-8
Model: XT2091-4
Android Version: 11
Download
Flash File Name: QZCS30.Q4-22-57-3
Model: XT2091-4
Android Version: 10.0
Download
Flash File Name: QZCS30.Q4-22-57-2
Model: XT2091-4
Android Version: 10.0
Download
Flash File Name: QZC30.Q4-22-57
Model: XT2091-4
Android Version: 10.0
Download

Moto G9 Power Stock Firmware RETBR Brazil Unit XT2091-4:

Build Number Security Patch/Changelog
RZCS31.Q2-57-12-10 May/June 2022

Moto G9 Power Stock Firmware RETEU Europe Unit XT2091-3:

Build Number Security Patch/Changelog
RZCS31.Q2-57-12-10 May/June 2022

Moto G9 Power Stock Firmware RETGB Germany Unit XT2091-3:

Build Number Security Patch/Changelog
RZCS31.Q2-57-12-10  May/June 2022

Moto G9 Power Stock Firmware India XT2091-3:

Flash File Name: RZCS31.Q2-57-12-10
Model: XT2091-3
Android Version: 11
Download
Flash File Name: RZCS31.Q2-57-12-8
Model: XT2091-3
Android Version: 11
Download
Flash File Name: QZCS30.Q4-22-57-3
Model: XT2091-3
Android Version: 10.0
Download
Flash File Name: QZC30.Q4-22-57
Model: XT2091-3
Region: India
Android Version: 10.0
Download
Flash File Name: QZCS30.Q4-22-57-2
Model: XT2091-3
Region: Europe
Android Version: 10.0
Download

Instructions to Install: via ADB Sideload Method

  1. Now go to the folder where you have extracted the ADB and Fastboot Tools.
  2. Download Stock ROM for Moto from the above list of Moto Stock Firmware Collections and save it in the ADB folder.
  3. Now Reboot Moto smartphone to Recovery Mode.
  4. Select Apply Update from ADB.
  5. Plug the Phone into PC using USB Cable, then open a command prompt window by pressing Shift Key + Right Mouse Click
    AMD COMMAND
  6. Now execute the below command on the CMD screen.
    fastboot flash partition gpt.bin 
    fastboot flash bootloader bootloader.img 
    fastboot flash bluetooth BTFM.bin 
    fastboot flash dsp dspso.bin 
    fastboot flash radio radio.img 
    fastboot flash logo logo.bin
  7. Now toggle to fastbootd
    fastboot reboot fastboot
  8. Again flash the following command
    fastboot flash boot boot.img 
    fastboot flash recovery recovery.img 
    fastboot flash dtbo dtbo.img 
    fastboot flash vbmeta vbmeta.img 
    fastboot flash super super.img_sparsechunk.0
    fastboot flash super super.img_sparsechunk.1
    fastboot flash super super.img_sparsechunk.2
    fastboot flash super super.img_sparsechunk.3
    fastboot flash super super.img_sparsechunk.4
    fastboot flash super super.img_sparsechunk.5
    fastboot flash super super.img_sparsechunk.6
    fastboot flash super super.img_sparsechunk.7
    fastboot flash super super.img_sparsechunk.8
  9. Toggle back to bootloader. Do the following:
    fastboot reboot bootloader 
    fastboot erase carrier 
    fastboot erase metadata 
    fastboot erase ddr 
    (Optional except you want to wipe) 
    fastboot erase userdata 
    fastboot reboot
  10. Wait until the Installation process Completes.
  11. Once the installation completed, reboot the Phone.

That’s it! Wait patiently until the flashing process completes if you have any queries related to the flashing process. Please leave a comment down below.

Manually Update Moto G9 Power Stock Firmware via Recovery

  1. First of all, Go to Settings –> About Phone –> Tap on Build Number 7 Times.
  2. Go to Developer Options –> Enable USB Debugging.
  3. Download Android Nougat for Moto from above and save it in Internal storage.
  4. Now Reboot Moto to Recovery Mode.
  5. Select Apply Update from SD Card.
  6. Select the Downloaded ZIP file from SD Card.
  7. Wait until the Installation process Completes.
  8. Once the installation completed, reboot the Phone.

That’s it!! You have successfully installed Stock Firmware On Moto G9 Power Smartphone.

I hope you installed the Stock ROM on Moto G9 Power successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

Advertisements

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.