Download and Install Motorola Razr 5G 2020 Android 11 Update

Today Motorola has finally rolled the Android 11 update to the Motorola Razr 5G globally which brings all the Android 11 features and customization. In this guide, we will show you how to install the Android 11 firmware file manually on Motorola Razr 5G.Download and Install Motorola Razr 5G 2020 Android 11 Update

Motorola Razr 5G – Device Overview

Although the Motorola Razr 5G brings back the nostalgia of the icon Razr phone, the specs under the hood do not justify its ultra-premium $1400 price tag. It comes powered by a Snapdragon 765G chipset which is the best mid-range 5G chipset from Qualcomm and is not the flagship processor. This is coupled with 8GB of RAM and comes with 256GB of onboard storage with no dedicated card slot for memory expansion. The display on the phone is a foldable P-OLED panel that sizes 6.2-inches.

The Motorola Razr 5G also sports a secondary display on the outside which is 2.7 inches and has a 600 x 800 pixels resolution. The phone camera with Android 10 out of the box and runs almost stock Android with some Motorola apps. Coming to the cameras, there is a not-so-good 48MP lens that is capable of recording 4K@30fps, 1080p@30/60/120fps. For selfies, there is a 20MP f/2.2 lens capable of recording 1080p@30fps. The fingerprint scanner on the Motorola Razr 5G is mounted on the back of the phone inside the logo. Under the hood, the battery is of surprisingly pretty less capacity and it stands at 2800 mAh. It supports 15W charging which is no close to its counterparts.

Download Motorola Razr 5G Android 11 Update

Here you can download the official Android 11 for the Motorola Razr 5G.

Software Version Download
Android 11 Version: RPSS31.Q1-40-17-12-20
Model: XT2071-4
Region: India (RETIN)
Download Link
Android 11 Version: RPSS31.Q1-40-17-12-4
Model: XT2071-4
Region: India (RETIN)
Download Link
Android 11 Version: RPS31.Q1-40-17-12
Model: XT2071-4
Region: India (RETIN)
Download Link

Steps to Install Motorola Razr 5G Android 11 Update:

Now, if you’re ready to flash the Android 11 manually on your Motorola Razr 5G device then you need to download the drivers, firmware file, and tools. So, without wasting any more time, let’s get into it.

Pre-Requirements:

Disclaimer:

GetDroidTips will not be held responsible for any kind of hardware or software damage to your device by following this guide. Proceed at your own risk

Firmware Installation Guide:

Check out the firmware flashing guide below for the Motorola Razr 5G. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

Advertisements

bootloader mode

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold the volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Motorola Razr 5G into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

Advertisements

device rescue Motorola Rescue and Smart Assistant Tool

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

    1. The next step is to open the command window and go to the adb folder Open Command Window here
    2. Enter the following command to flash the firmware.
      fastboot flash partition gpt.bin 
      fastboot flash bootloader bootloader.img 
      fastboot flash bluetooth BTFM.bin 
      fastboot flash dsp dspso.bin 
      fastboot flash radio radio.img 
      fastboot flash logo logo.bin
    3. Now toggle the fastbootd
      fastboot reboot fastboot
    4. Again flash the following command
      fastboot flash boot boot.img
      fastboot flash recovery recovery.img
      fastboot flash dtbo dtbo.img
      fastboot flash vbmeta vbmeta.img
      fastboot flash super super.img.sparsechunk.0
      fastboot flash super super.img.sparsechunk.1
      fastboot flash super super.img.sparsechunk.2
      fastboot flash super super.img.sparsechunk.3
      fastboot flash super super.img.sparsechunk.4
      fastboot flash super super.img.sparsechunk.5
      fastboot flash super super.img.sparsechunk.6
      fastboot flash super super.img.sparsechunk.7
    5. Toggle back to bootloader. Do the following:
      fastboot reboot bootloader
      fastboot erase carrier
      fastboot erase metadata 
      fastboot erase ddr
      (Optional except you want to wipe) fastboot erase userdata
      fastboot reboot
    6. Now your device will reboot into bootloader with the firmware you installed.

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.

Advertisements

In the meantime, if you liked this content and want to read more content, for more such awesome coverage, you can head over to our check out our Windows GuidesGaming GuidesSocial Media GuidesiPhone, and Android Guides to read more. Make sure to subscribe to our YouTube Channel for awesome videos related to Android, iOS, and Gaming. So, until the next post…Cheers!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.