Fix: Oculus Quest Stuck on Loading Screen

Oculus Quest is a virtual reality headset that provides users with an immersive experience. Nevertheless, it is not immune from technical glitches and malfunctions, one of which is getting stuck while loading. Users may be frustrated by this, which prevents them from enjoying their devices to their full potential. We will investigate the common causes and potential solutions to the Oculus Quest stuck on loading screen issue in this article.

Fix: Oculus Quest Stuck on Loading Screen

Causes of Oculus Quest Stuck on Loading Screen

It is possible for the Oculus Quest to get stuck on the loading screen for a variety of reasons. Here are a few examples:

  1. Software Updates: Sometimes, software updates can make the device stuck on the loading screen. In most cases, this happens when an update fails to install or is interrupted during the update process.
  2. Battery Level: When the battery level is critically low, the Oculus Quest may also be stuck on the loading screen. Power is necessary to make the device work properly, so it requires a certain level of power.
  3. Corrupted Files: Devices can also get stuck on the loading screen when corrupted files are present. In some cases, this is caused by incorrect downloading or installation of files.
  4. Hardware Issues: In some cases, the Oculus Quest may become stuck in the loading screen as a result of hardware issues such as a faulty USB cable or a damaged charging port.

Solutions to Fix Oculus Quest Stuck on Loading Screen

You can try several potential solutions if your Oculus Quest is stuck on the loading screen. Here are some of the most effective ones:

Fix 1: Restart the Device

Usually when electronic devices have technical problems, including Oculus Quest, this solution is suggested. A restart of the device can clear temporary glitches that might be causing the issue, which involves turning it off and on again.

Whenever the Oculus Quest gets stuck on the loading screen, restarting the device is an easy and simple solution to try. There is no need for technical expertise, and it only takes a few seconds to complete. Furthermore, it does not require any special tools or equipment, making it accessible to everyone.

When troubleshooting more complex issues, restarting the device may not work as well as fixing minor glitches. Depending on the cause, restarting a device may not be enough to resolve a problem caused by corrupted files or faulty hardware.

When restarting a device does not resolve the problem, it’s important to try other possible solutions. You may need to charge the device, clear the cache and data, perform a factory reset, or check for problems with the hardware.

Fix 2: Charge the Device

In addition to the previous solution, it can help fix the Oculus Quest stuck on the loading screen. Ensure that the device has enough power by connecting it to its charging cable and adapter.

There is a straightforward solution that is easy to apply. Charge the device simply by connecting the charging cable and adapter and waiting for it to fully charge. It is possible that the loading screen issue can be resolved once the device is fully charged.

If the battery level is critically low, charging the device is a practical solution. In order for Oculus Quest to function properly, it must have a certain amount of power, and a low battery level may cause the device to malfunction. Thus, charging the device can help ensure that it has sufficient power to function properly.

It is possible to fix loading screen issues by charging the device, but charging may not be the best solution for more complex problems. Charges may not resolve certain issues, such as corrupted files or hardware malfunctions.

Fix 3: Clear Cache and Data

You can also try clearing your cache and data to fix the Oculus Quest stuck on loading issue. To resolve the problem, you must delete temporary files and data from the device, as they may be corrupted or causing conflicts with the operating system.

It is more complicated than simply restarting the device or charging it, but most users can still accomplish it. In order to clear the Oculus Quest’s cache and data, follow these steps:

  1. Open the Settings menu on your Oculus Quest.
  2. Go to the Device menu.
  3. Click on Storage.
  4. Choose Clear Data or Clear Cache.
  5. To complete the process, follow the on-screen prompts.

If you clear cache and data on the device, everything on the device will be removed, including login credentials, saved games, and other personal information. Therefore, it’s crucial to back up any important data before performing this solution.

Especially if the issue is caused by corrupt files or data, clearing the cache and data can resolve the loading screen problem. It may not work for more complex problems, such as hardware malfunctions.

Fix 4: Perform a Factory Reset

The Oculus Quest stuck on the loading screen can also be fixed by performing a factory reset. It is possible to fix the issue by restoring the device to factory settings, which will help resolve any software issues that might be causing the issue.

In comparison to the other solutions we’ve discussed, a factory reset will remove all data, settings, and preferences. Hence, it is essential that any essential data be backed up prior to the factory reset.

The steps to perform a factory reset on the Oculus Quest are as follows:

  1. Select Settings from the Oculus Quest menu.
  2. Go to the Device menu.
  3. Choose Reset All Settings.
  4. To complete the process, follow the on-screen prompts.

As soon as the factory reset is completed, all data, settings, and preferences will be erased, and your device will return to its original factory settings.

It is often possible to fix a loading screen issue by performing a factory reset, especially if the issue is caused by a corrupted file or a software problem. It is important to consider other options first, as performing a factory reset will erase all data on the device.

Fix 5: Check Hardware Issues

It is possible that Oculus Quest stuck on the loading screen is caused by a hardware issue if none of the previous solutions has worked. It is recommended to check for any hardware issues that may be causing the issue in this case. To check for hardware issues on the Oculus Quest, follow these steps:

  1. If the device shows signs of wear and tear, check for physical damage. Look for any cracks, dents, or scratches on the device. It is possible that any damage may be causing the problem.
  2. Make sure the cables and connectors are in good condition. Connect the charging cable and adapter to the device properly and ensure that they are in good condition. Be sure to inspect the connectors on the device to ensure they are clean and debris-free.
  3. Switch to a different network or Wi-Fi connection to test the device. There is a possibility that the problem is caused by the device’s Wi-Fi or network connection if the issue persists.
  4. Make sure the system is not overheating. The device may be overheating, which may be causing the problem. See if the problem persists after letting the device cool down.
  5. To obtain further assistance, it is recommended to contact support if none of the above steps were successful. If they can diagnose the problem and provide a solution, they may be able to help.

In order to identify any underlying problems causing the loading screen issue on the Oculus Quest, check for hardware issues. Ensure all cables and connectors are connected properly and that the device is in good condition. The best option is to contact support for further assistance if the issue persists.

Also Read: Amazon Photos Not Working, How to Fix?

So, that’s how to fix the Oculus Quest Stuck on loading screen issue. We hope that this guide has helped you. Meanwhile, in case you need more help, comment below and let us know. 

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.