Advertisements

Oppo A52 CPH2061 ISP EMMC PinOUT | Test Point | EDL Mode 9008

Oppo added one more smartphone to its mid-range segment in India. Oppo A52 may be a direct competitor to smartphones like the Redmi Note 9 Pro Max and the Realme 6 Pro. It although features some good features like a quad-camera setup, 5000 mAh of battery with 18-watt fast charging, and much more. The device came out of the box with an Android 10 (ColorOS 7.1) update. In this guide, we will show you the real image of the ISP pinout and test point for the Oppo A52 CPH2061.

By using the ISP PinOUT, you can easily restore the stock ROM, bypass FRP lock, or reset user data on your device via UFi Box. In this guide, we will also guide you on how to reboot into 9008 EDL Mode.

What is ISP PinOUT?

ISP or In-system programming also known as in-circuit serial programming (ICSP) for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile, computer. You will find the IS Pinout connection on the logic board of your device. Therefore, you will need to remove the back panel of the handset and follow the below image to locate the pinout.

Oppo A52 ISP Pinout Image:

Oppo A52 UFS PinOUT | Test Point | EDL Mode 9008
Images for all A52 is the same as A92

How to Enter EDL Mode on Oppo A52 (CPH2061)

Follow this instruction carefully to boot your device into EDL Mode (aka Emergency DownLoad Mode)

Method 1: Using ADB

  • Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
  • Connect your device to your PC
  • Open the adb command and enter the command
    .\adb reboot edl

Method 2: Using Fastboot

  • Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
  • Boot your device into bootloader
  • Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
  • now enter the command
    .\fastboot oem edl

Method 3: By Hardware Test Points / Restore Your device

  • Download the QDLoader driver
  • Find the EDL PinOUT/Test Point on your device (refer image above to find the test point)
  • To enter EDL mode, you need to use a metal tweezer or a conductive metal wire to short the points.
  • Once you are done, connect your device to PC using USB cable
  • This way, your device will enter EDL mode. Now you can open the QFil or QPST Tool to flash the firmware and restore your device.

How to Use UFS Pinout using Easy JTag

  • Download the Easy Jtag
  • Find the PinOUT/Test Point on your device (refer image above to find the test point)
  • follow the software guideline.

I hope this guide was helpful to find the Oppo A52 CPH2061 ISP Testpoints.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.