Advertisements

Redmi K30 QCN and Scatter File | Repair and Fix IMEI baseband

Are you a Xiaomi Redmi K30 (phoenix) device user and facing issues with the invalid IMEI or unknown IMEI baseband? Then don’t worry. We got you covered. Here in this guide, we’ve provided the full guide to repair unknown IMEI baseband on the Redmi K30 device easily.

Now, talking about the IMEI (International Mobile Equipment Identity) number, it’s a unique 15-digit code that precisely identifies the device model whether you’ve used a SIM card or not. It’s worth mentioning that each and every IMEI number is unique and individually assigned to each and every mobile phone worldwide. You can also check the IMEI number on Redmi K30 by typing the *#06# on the dialer or Phone app.

We all know that a SIM card can be changed easily from a mobile phone. Therefore, the IMEI number comes in handy to track any particular device across the globe. Now, if you want to use a mobile device to use a SIM then it’s necessary to work the IMEI number properly. Meanwhile, the IMEI number can get corrupted or invalid, or null while flashing any third-party firmware or any custom file on your device. Therefore, you should fix that issue for your Redmi K30 model.

Redmi K30 QCN and Scatter File | Repair and Fix IMEI baseband

Steps to Repair and Fix IMEI number on Redmi K30 (phoenix)

Here you will get an easy guide to repair and restore the IMEI number on your Xiaomi Redmi K30 device by using the QCN Rebuilder Tool. This tool is free of cost and easy to use even if you’re new to this process. Now, before heading over to the guide, let’s follow all the requirements and download the links below.

Now, let’s check out the download links and requirements below.

Download Files:

Pre-Requirements:

  • This guide and QCN file are for the Redmi K30 model only.
  • Your device should be charged up to 50% at least.
  • A PC/Laptop and a USB cable are required.
  • Keep a full backup of the device data before doing anything.
  • Enable USB Debugging. Check the video guide.
  • Download all the files and tools from above.

Disclaimer:

Flashing IMEI manually is not legal in some of the regions. You should check with the law of your region about it. GetDroidTips only provides guides. You will be solely responsible if you proceed.

Reset EFS Partition:

adb shell
su
dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst1
dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst2
dd if=/dev/zero of=/dev/block/bootdevice/by-name/fsg
dd if=/dev/zero of=/dev/block/bootdevice/by-name/fsc

IMEI Rebuilding and Restore Guide

  • After downloading, install, and run the QCN Rebuilder tool on your PC.
  • Click on Open file and select the Redmi K30 QCN file.
  • Now, replace the IMEI with the original IMEI number.
  • Click on Rebuild.
  • Next, connect your phone to a PC using a USB cable.
  • Open the dial pad on your device and type this code *#*#717717#*#* or use any method to enable diagnostic mode.
  • If the above code doesn’t work, use CMD on your PC by following the commands below.
adb shell
su
setprop sys.usb.config rndis,diag,adb
  • Then run the QPST tool on your computer.
  • Click on the Restore tab > select the rebuilt QCN file > click on Restore.
  • You’re done.

That’s it, guys. We hope you’ve found this guide useful for your Redmi K30. If you’re facing any issues, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.