How to Root Realme Narzo 50i RMX3231 / RMX3235 using Magisk without TWRP

Pre-Requirements

• You need to unlock the bootloader on any Realme device
• Your phone should have a battery juice of more than 60%.
• Keep a backup of your device data at first. Therefore, you can get back the important data if anything goes wrong.
• The image file in this article is supported by the Realme Narzo 50i model only. DO NOT try to flash it on other models.
• You will also require a PC/Laptop and a USB cable to connect your device to the computer.
• You should download all the necessary files, tools, and drivers below accordingly.

Required Downloads:

• Download ADB & Fastboot files (Windows/MAC)
• Realme USB Drivers – Download and install it on your computer
• Download the latest Realme Narzo 50i Firmware Flash File and move it to the PC

1. Download and Extract the OZIP Firmware:

1. How to Patch the Boot Image using Magisk?

• Attach your device via USB cable and copy only the boot.img file from the extracted folder to your device storage
• Launch Magisk Manager. When a popup appears asking to install Magisk, select INSTALL and choose to install again.
• Tap on “Patch Boot Image File”.
  

  

• Navigate to internal storage and select your phone’s boot image that you transferred earlier.
• Wait for a couple of seconds. Magisk will start patching the boot image.
• Once the boot image has been patched, copy the “patched_boot.img” from the internal storage and replace it in your PC’s same extracted ROM folder.

Now you can follow the second step to flash the patched boot image file.

2. Steps To Install the Patched Boot Image on Realme Narzo 50i

Follow the proper guide to install Patched Boot Image on Realme Narzo 50i from the below link:

• Now, extract the ADB & Fastboot tool, then move the patched boot image file to the same folder.
• Press and hold down the Shift key + right-mouse-click to open the command window/PowerShell.
• Next, enter the following command to flash the “patched_boot.img” to install Magisk and root your Android device:

fastboot flash boot patched_boot.img

• For devices with an A/B partition system, you have to use the following commands:

fastboot flash boot_a patched_boot.img

fastboot flash boot_b patched_boot.img

Please replace [patched_boot.img] with the name of the boot image file you downloaded, followed by the .img extension.

• Wait for the flashing process to complete.
• Finally, type in the command to reboot your device.

fastboot reboot

• That’s it.

Steps to Verify the Systemless Root

1. Launch the Magisk Manager app on your device.
2. Now, to verify the systemless root access on your phone, you will see the status screen. Here all options should be green ticked if properly rooted. If yes, that means you’ve successfully bypassed the Google SafetyNet measure.

That’s it, guys. We hope you’ve found this guide useful and successfully rooted your Realme Narzo 50i ((RMX3231 / RMX3235)) device. For any queries, feel free to ask in the comments below.