This page collects the stock firmware for the Samsung Galaxy S6 Edge. If you want to flash the official firmware manually, this guide covers it.
Flashing Samsung firmware is done with Odin on a Windows PC. Odin lets you upgrade or downgrade the Galaxy S6 Edge yourself, without a service centre. Read the guide through before you start.
Samsung Galaxy S6 Edge overview
The Galaxy S6 Edge has a 5.1-inch 1440 x 2560 display with Gorilla Glass 4, an Exynos 7420 octa-core processor, and 3GB of RAM, with 32, 64, or 128GB of storage. It has a 16MP rear camera with OIS and a 5MP front camera. It launched on Android 5.0.2 Lollipop and was later updated as far as Android 7.0 Nougat, which is its last official version. It has a non-removable 2,600mAh battery with wireless charging and a front fingerprint sensor.

Why flash the stock firmware
Reflashing the official firmware is the standard fix for software faults and the way back to stock after rooting or running a custom ROM. It is worth keeping the firmware file on your PC so you can:
- Unbrick the Galaxy S6 Edge
- Fix a bootloop
- Upgrade or downgrade the software version
- Unroot the phone
- Fix lag, crashes, or OTA update problems
- Return to stock to restore the warranty (where it still applies)
Note that flashing the official signed firmware with Odin does not trip the KNOX counter, unlike rooting or flashing a custom ROM.
Samsung Galaxy S6 Edge stock firmware
Pick the file that matches your exact model number and region. Flashing firmware for the wrong variant can cause network or boot problems.
SM-G925P (Sprint):
Build: G925PVPS4DQJ1
Model: SM-G925P | Carrier: Sprint |
Download |
SM-G925W8 (Canada):
Build: G925W8VLU6DRF1
Model: SM-G925W8 | Region: Canada |
Download |
SM-G925F (Android 7.0 Nougat):
Build: G925FXXS6ETJ4
Model: SM-G925F | Android 7.0 |
Download |
SM-G925I (Android 5.0.2):
Build: G925IDVU1BOE3
Model: SM-G925I | Android 5.0.2 |
Download |
How to install the stock firmware on the Samsung Galaxy S6 Edge
Go through the requirements and download the tools and drivers first.
Download links
Prerequisites
- This firmware is for the Samsung Galaxy S6 Edge only. Match your exact model number.
- Install the Samsung USB drivers and Odin on a Windows PC.
- A USB cable.
- Charge the phone to at least 60%.
- Take a full backup of your data.
- You will need to boot into Download mode.
Disclaimer
GetDroidTips is not responsible for any damage or error to your device during or after this guide. Proceed at your own risk.
Instructions
After downloading the firmware, extract it, then flash it with Odin. The full walkthrough with screenshots is here:
Follow the complete Odin flashing guide | Video tutorial
FAQ
Will flashing the stock firmware erase my data?
A full firmware flash with the stock CSC usually wipes the phone, so back up first. Using the HOME_CSC file instead of the CSC file can keep data when you stay on the same version, but do not count on it.
Does flashing stock firmware trip KNOX?
No. Flashing the official signed firmware with Odin does not trip the KNOX counter. Only rooting or flashing a custom binary does.
Which firmware file should I pick?
The one that matches your exact model number (for example SM-G925F) and, for carrier models, your region or carrier. The wrong variant can break mobile network or Wi-Fi.
What is the latest Android version for the S6 Edge?
Android 7.0 Nougat was the last official version. For anything newer you would use a custom ROM.
That covers flashing the stock firmware on the Samsung Galaxy S6 Edge. If you have any questions, leave a comment below.