Did you accidentally brick your Datalogic Memor 1, or are you facing any boot loop, lag, or shatter? Then you are in the right place. Here we will guide you to install the latest Stock ROM flash file on your Datalogic Memor 1. The guide is simple and easy.
This firmware can be installed using the QPST or QFil Flash Tool. We have shared both the method to flash the firmware file on Datalogic Memor 1.
Stock ROM and its importance in Smartphones
Stock ROM is the operating system that comes pre-built when you buy the device from a retailer. Usually when a person needs to customize his device with custom ROMs and other modifications he opts to move on from the stock firmware. However, when things go wrong during any modification, reverting back to the stock ROM is the only option that can solve this issue.
By installing a stock ROM you can solve the issue of bootloop, device bricking. Besides, you can perform system OS upgrade or downgrade as per your choice.
- You can unbrick your bricked Datalogic Memor 1.
- Fixes the bootloop and instability issue as well.
- To upgrade or downgrade your Datalogic Memor 1.
- You can skip the Screen Lock and remove malware as well.
- To fix bugs lags on your Android Device.
- You Can Remove root on your device [Unroot]
- You can Restore Stock ROM after using Custom ROM.
- This Software Update helps to solve the issue with WiFi, Bluetooth, and more.
- You can fix the soft brick issue on your Datalogic Memor 1.
- You can preload Google Applications as well.
Steps to Flash Datalogic Memor 1 Firmware File
Now, before we get straight to the Steps of stock ROM installation, make sure to follow the requisites section below and have the flash tools and drivers installed on your system.
- The stock firmware provided here is for Datalogic Memor 1. Do not flash it on any other phone.
- We recommend having at least a 50% charge on your device before installing the firmware.
- A PC or Laptop.
- Make sure to take a backup of your device data. You can Backup your phone Without Root.
- Alternatively, if you have TWRP Recovery installed on your device, you can create Nandroid Backup through TWRP Recovery.
- Device Supported: Datalogic Memor 1
- Tool Supported: QFil or QPST tool
- Android OS: Android 8.1 Oreo
- Processor: Qualcomm Snapdragon
- File: Software Update
- Gapps File: Included
Now, grab the stock firmware, flash tool, and drivers for the Datalogic Memor 1 from the link below.
Method 1: Instructions to Install via Recovery:
First, you can try the official method to install the OTA stock ROM update via Datalogic device recovery. Follow the guide link given below to install the OTA update on the Datalogic device.
- To install the OTA package, download and move the OTA file into your phone’s internal storage.
- Now reboot your device into recovery.
- Clear the cache
- Tap on install update via SD Card or internal storage option
- Find your OTA package and proceed to installation
- When the installation is done, you can reboot your device.
Method 2: Instructions to Install via QFIL Tool:Guide to Install Stock ROM using QFIL Tool
Method 3: Instructions to Install via QPST Tool:
Here are the instructions you need to follow in order to install Stock ROM on the Datalogic Memor 1 :
- First of all, do all the PREREQUISITE STEPS and Now Open the Extracted QPST Folder
- You will find two files with the name: Qualcomm_USB_Drivers_For_Windows.rar and QPST.WIN.2.7 Installer-00429.zip
- Open the QPST Win folder and Install the QPST.exe file on your PC/Laptop
- After Installation, Go to the Installed Location in the C Drive
- Open the QPST Configuration
- Now in the QPST Configuration, Click on Add new port -> Select the com port of your device -> and close it
- Now Open the EMMC Software Downloader in the same folder located all the QPST Files
- In EMMC Software Downloader, Check program boot loaders -> Browse for the device com port
- Now Click Load XML Def and browse for rawprogram0.xml in folder ROM in EMMC Software Downloader (If you didn’t extract please extract the ROM and then browse the file rawprogram0.xml)
- Now tap on Load Patch def and browse for patch0.xml in folder ROM
- Check the search path 2 and browse for the folder ROM
- Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important) and it will search for the new hardware found, install the driver
- That’s it! Once your installation is done! Reboot the phone! Congrats, you successfully installed Stock ROM on Datalogic Memor 1.
So, that’s all about how to install stock ROM on Datalogic Memor 1. We hope this tutorial was useful to you. If you find any difficulties or have any doubt, do let us know.