How to Install Stock ROM on Huawei P40 Lite E Arthur-L29N [Firmware flash file]

On this page, we will guide you on how to install the official stock ROM flash file on your Huawei P40 Lite E Arthur-L29N. Well, the device runs out of the box with Android 9.0 Pie which is powered by the HiSilicon Kirin 710F processor. It received the Android 10 update later.

To install the firmware flash file on Huawei P40 Lite E Arthur-L29N, you need to download the software called Huawei Flash tool. This method simple and easy.

How to Install Stock ROM on Huawei P40 Lite E Arthur-L29N [Firmware flash file]

Stock ROM and its importance in Smartphones

Stock ROM is the operating system that comes pre-built when you buy the device from a retailer. Usually when a person needs to customize his device with custom ROMs and other modifications he opts to move on from the stock firmware. However, when things go wrong during any modification, reverting back to the stock ROM is the only option that can solve this issue.

By installing a stock ROM you can solve the issue of boot loop, device bricking. Besides, you can perform a system OS upgrade or downgrade as per your choice.

Advantages

  • Flash Stock to unbrick your Huawei P40 Lite E device
  • Fix the device boot loop issue
  • Upgrade and Downgrade your phone software version
  • Flash Stock ROM to unroot the device
  • Fix bugs or lag or stutter on Huawei P40 Lite E device
  • Increase software performance, battery draining issue, OTA update issue
  • Gain phone warranty again (if applicable)

Steps to Flash Firmware File on Huawei P40 Lite E (Arthur-L29N)

Now, before we get straight to the installation guide, make sure to follow the prerequisites section below and make sure you download the flash tools and drivers on your PC.

Advertisements

Requisites

Disclaimer

GetDroidTips will not be responsible for bricking, hardware, or any kind of software problems arising on your while you follow this guide to install stock ROM on your phone. First, understand the tutorial and then follow it at your own risk.

Stock Firmware Information

Firmware

  • Device Supported: Huawei P40 Lite E
  • Model: Arthur-L29N
  • Android OS: 10.0
  • User interface (UI): EMUI 10.1
  • Processor: HiSilicon Kirin 710F
  • File: Software Update
  • Gapps File: Included

Now, grab the stock firmware for the Huawei P40 Lite E from the link below.

Download Flash Files

  • Flash File Name: Huawei_P40_Lite_E_Arthur-L29N_10.1.0.142_C432E2R3P1_EMUI10.1.0_05016TTV_Dload
  • File Size: 5 GB
  • Download Link: Click Here | Mirror

Upgrade using OTG Adapter or OTG Cable+USB Memory

  1. Download the dload firmware from the above link, extract it and copy the same to your USB memory stick. Make sure it is formatted as exFat or NTFS.
  2. Factory reset your device from the Settings option (optional). Once done, power it off.
  3. Now connect the memory stick using an OTG cable to your device. Make sure it has all the three extracted files from the dload firmware.
  4. Press the Power button and as it vibrates and shows the Huawei+Android logo, presses the Power button three times. Doing so will make your device to reboot to eRecovery mode.
  5. In that menu, select Update Mode, then select the Memory card/OTG update mode. The update will now start.

So these were the steps to install the stock dload firmware on Huawei P40 Lite E using the memory stick. Let’s now have a look at how the same could be done via NM Card.

Install Dload Firmware using Huawei NM Card

  1. Extract the stock firmware and place the three extracted files to the Huawei NM Card.
  2. Factory reset your device (optional) and then power off your device.
  3. Press the Power button and as it vibrates, it will show the Huawei+Android logo. In this instance, press the Power button 3 times. This takes you to the eRecovery mode.
  4. Select Update mode from the menu and select Memory Card/OTG Update mode. The update will then start.

However, if you wish to carry out the update from the system itself, then follow the instructions mentioned in the next section below.

Update from System

  1. Extract the dload stock firmware of Huawei P40 Lite E and transfer the three extracted files to the Huawei NM Card or to the memory stick.
  2. Now head over to the dialer and enter *#*#2846579#*#*. From the menu that appears, select the Software Update option.
  3. After that, select the Memory Card Upgrade. The system will now read files from the inserted SD card/USB storage or NM Card and will subsequently flash the file.
  4. When the installation is complete, you could safely remove the OTG.

For Installation via Huawei Multi-Download Tool, follow this

Advertisements
Full Instruction Guide

So, that’s all about how to install stock ROM on Huawei P40 Lite E. We hope this tutorial was useful to you. If you find any difficulties or have any doubt, do let us know.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.