Today we will guide you to install the stock ROM on Nubia Play 5G. Nubia, the gaming smartphone brand, has unveiled its new smartphone i.e., the Nubia Play 5G. This smartphone comes with a 6.65 inch AMOLED display with a massive 144Hz screen refresh rate, Snapdragon 765G, quad rear cameras, 5100mAh battery, 6/8GB RAM, 128/256GB ROM, and runs on Android 10.
Android is full of customizations and tweaks that all the users can easily perform. But users have to follow the guide and step-by-step process properly in order to done customization successfully. Unfortunately, some of the users may not follow the proper steps or don’t flash the compatible file on their devices during Custom ROM installation or rooting, etc. Therefore, their devices can be easily bricked or stuck into the bootloop issue.
In that case, it’s highly recommended to unbrick their devices or fix the bootloop issue at first by flashing the Stock ROM again. Even if your device is having an issue with the software performance or overheating or network drop or battery charging or anything else, you should re-install the Stock ROM. As the Nubia Play 5G device runs on Qualcomm Snapdragon 865 chipset, we will provide you the firmware installation method using the QFil Flash Tool.
Nubia Play 5G Device Overview
The Nubia Play features for a 6.65 inches AMOLED display with a Full HD+ resolution without any type of notches or punch hole. It also has an aspect ratio of 19:5:9, a resolution of 1080 x 2340 pixels, a pixel density of 388 Pixel Per Inch (PPI), a screen to body ratio of 80.5 percent, a massive refresh rate of 144Hz, and a touch sampling rate of 240Hz. This AMOLED display also comes with an optical in-display fingerprint scanner.
While talking about the internals, the Nubia Play 5G sports the Qualcomm Snapdragon 765G, which is built on the 7nm process. This octa-core setup includes one Kryo 475 Prime core, one Kryo 475 Gold core, and six Kryo 475 silver cores. To the GPU side, it sports the Adreno 620 GPU. Talking about the memory side, it comes with 6, and 8GB of RAM. And it comes with 128, and 255GB of UFS 2.1 onboard storage. However, the brand doesn’t reveal whether this storage can be expanded or not. The device runs on the NubiaUI 80 that is based on Android 10.
Coming to the optics side, the Nubia Play sports a quad rear camera setup that is arranged in a vertical manner to the center of the smartphone. This camera setup includes a primary 48MP Sony IMX 582 sensor with an aperture value of f/1.8 and PDAF. This sensor pairs with an 8MP ultra wide-angle sensor with an aperture value of f/2.2, and a tertiary 2MP macro sensor with an aperture value of f/2.4. And finally, this setup also includes a 2MP depth sensor with an aperture value of f/2.4. To the front, the device comes with a 12MP sensor with an aperture value of f/2.0.
ZTE has included a massive 5,100 mAh battery on this device to long last because of the 144Hz screen. This also supports for 30W fast charging. It is available in three color options, namely the Black, Blue, and White. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot. Bluetooth 5.0, A2DP, LE. GPS with A-GPS, GLONASS, GALILEO, BDS, NFC. And USB 2.0, Type-C 1.0 reversible connector. Sensors on board include accelerometer, gyro, proximity, and compass. Further, the right-hand side of the phone features the two capacitive shoulder buttons for enhanced gaming utility i.e., the Touch-sensitive gaming triggers.
Steps to Install Stock ROM on Nubia Play 5G
Before installing the Stock ROM on your Nubia Play 5G, you should download the firmware file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Stock ROM Advantages
Stock ROM comes by default on a smartphone or tablet device that usually runs on an operating system like Android OS. All the device OEMs provide the specially crafted and compatible firmware version for each and every model. It also offers a more stable and smoother user experience which you may not find on Custom Firmware.
- Fix Bootloop issue on Nubia Play 5G
- Bricked your Nubia Play 5G? Unbrick by following this tutorial
- Upgrade or Downgrade the software version on Nubia Play 5G
- Can unroot the device
- Fix software related issues or bugs
- Get back the device warranty again, if under warranty period
- Device Name: Nubia Play 5G
- ROM Type: Stock ROM
- Gapps File: Included
- Tool Supported: QFil Flash Tool
- Processor: Qualcomm Snapdragon 765G
- Android Version: Android 10
Firmware Changelog and Downloads:
- We assume that you’ve downloaded the firmware file and installed the other drivers & tools on your PC.
- This Stock ROM file is exclusive for the Nubia Play 5G model only.
- Try to charge your device more than 60% at least.
- Take a Full Data Backup without Root before doing anything.
- If TWRP Recovery already installed, keep a Nandroid Backup via TWRP.
- You will require a computer and a USB data cable.
Method 1: Instructions to Install:
- First of all, to install the firmware on Nubia Play 5G, download the package and move it to the device storage.
- Go to Settings -> About Phone -> Software Update
- Tap on the 3 dot icon in the top right corner and select the update package.
- Find the zip file and confirm the process.
- Wait for the installation process to complete.
Method 2: Instructions to Install via QFil:
Download the Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using the QFIL tool.How To Install firmware via QFil
I hope you installed the Stock ROM on Nubia Play 5G successfully, Now please rate this website with your comment. We always welcome feedback and improvements.