Wiko Lenny 3 Stock Firmware ROM (Flash File)

Looking to install the firmware on your Wiko Lenny 3? You’ve come to the right place. The Wiko Lenny 3, which runs on Android 6.0 and is powered by a MediaTek processor, can be restored or updated by flashing the official firmware. This guide will help you through the process using the SP Flash Tool, also known as the Smartphone Flash Tool.

Android provides a wealth of customization options, from flashing custom ROMs to APK modding. However, these activities require care. Many users rush through rooting or modding without following instructions properly, which can lead to bricking the device. If your Wiko Lenny 3 is bricked, don’t worry—this guide will show you how to restore it to working condition.

The Advantage Of Stock ROM:

• Flash Stock To Unbrick your Wiko Lenny 3
• Flash Stock ROM to Fix the boot loop problem
• Upgrade and Downgrade Wiko Lenny 3
• Unroot or Fix Bugs on your phone
• To fix the lag or stutter on Wiko Lenny 3
• By flashing Stock ROM, you can solve software problems.
• Revert to stock to gain your warranty.
• To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
• Restore Wiko Lenny 3 back to Factory State
• Bypass Pattern lock on your device

How to Flash Wiko Lenny 3 Firmware File

Before installing the Stock ROM on your Wiko Lenny 3, download the firmware flash file. Then, download and install the USB Drivers and flash tool on the PC. Once you finish these, you can proceed to the steps below. But let’s take a quick look at the importance of stock firmware and the firmware details below.

Pre-Requirements:

• Supported device: Wiko Lenny 3
• Make sure to charge your device more than 50%
• You need a PC or Laptop with a USB cable.
• Take a complete backup of your Android phone
• Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Android USB Drivers

Download Flash Files

Instructions to Install: via SP Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

1. Ensure you follow and download all the required files and flash tools on your PC.
2. Open the flash tool exe file to open the SP Flash Tool User Interface
3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
4. Once you load the file, click the Download button
5. To start the upgrade process of stock ROM on your Wiko Lenny 3, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
6. When the phone connects, your device will start upgrading the stock firmware
7. Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
8. That’s it! You can reboot your Wiko Lenny 3

Follow Complete Tutorial

Watch Video Tutorial

That’s it, guys. We hope that you’ve successfully installed the Stock Firmware on your Wiko Lenny 3 device. If you have any questions, feel free to ask in the comments below.