Tecno Spark 2 KA7O Firmware Flash File (Stock ROM 8.1 Oreo)

Looking to Install a firmware flash file on Tecno Spark 2 KA7O? then you are at the right place. Now install the official Stock firmware on Tecno Spark 2. Tecno launched the latest smartphone called Tecno Spark 2. It came out of the box with Android 8.1 Oreo. Tecno Spark 2 which under the hood runs on a MediaTek MT6580 processor.

On this page, we will guide you on how to flash the official stock firmware on Tecno Spark 2 using the software known as SP Flash Tool, Formally also called the Smartphone Flash Tool. By following this guide, you can fix any software-related issues such as hard brick, soft brick, Bluetooth or WiFi issue, GPS issue, lag, the screen of death (SOD), freezing, stuck on boot logo, boot loop, and many more.

Tecno Spark 2

The Advantage Of Stock ROM:

  • Flash Stock To Unbrick your Tecno Spark 2
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Tecno Spark 2
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Tecno Spark 2
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Firmware Details:

  • Gapps File: Included
  • Device Supported: Tecno Spark 2 KA7O
  • Processor: MediaTek MT6580
  • Android OS: 8.1 Oreo
  • Tool Supported: SP Flash Tool
  • Language Supported: Multi-Language

Steps to Install Stock Firmware on Tecno Spark 2 KA7O:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.


  • Charge your phone: Before you proceed with the below information, you are recommended to ensure that your Tecno Spark 2 is at least 50% charged.
  • Laptop or PC: To carry out this installation, you need a PC or Laptop.
  • Take Device Backup: The very first thing to pay attention to is taking the device backup. You might not be able to take the backup of phone data, however, if you have inserted a memory card in your device, remove it at least to save it.
  • Smartphone Flash Tool: Download the latest SP Flash tool and extract it (Install)
  • VCOM driver: Download VCOM Driver and install it on your computer (still compatible with MT67xx phones)
  • Install Latest Driver: Install the Latest Tecno USB Drivers. [For All Android USB Drivers]

Download Firmware Flash File

Software Details Download Link
Flash File Name: Tecno_Spark_K7_MT6580_V180_180124.zip
File Size: 1.5 GB
Android Version: 8.1 Oreo
Download Link


We’re at GetDroidTips will not be responsible for any error/issue that occurs to your device while/after installing this firmware or following this guide. Proceed at your own risk.

Instructions to Install:

  1. Make sure you follow and download all the required files and flash tools on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your Tecno Spark 2, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware.
  7. Wait for a few minutes; if you see a green button on your flash tool, which means the upgrading process has been completed.
  8. That’s it! You can reboot your Tecno Spark 2.

For complete tutorials, follow this guide. Additionally, you can follow the video tutorial as well for better guidance.

I hope you installed the Stock ROM on Tecno Spark 2 KA7O successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.