Vivo T1X was launched in India that features a 6.58-inch display with a 120 Hz refresh rate. Under the hood, it is powered by a MediaTek Dimensity 900 SoC coupled with up to 8GB of RAM support. The device sports a triple rear camera setup featuring a 64 MP primary camera. The handset has an 8 MP selfie camera for selfies and video chats.
In this guide, we have the latest firmware flash file for the Vivo T1x (PD2142F ) powered by a MediaTek Dimensity 900 processor. To install the firmware flash file, we need a software called the SP Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.
This process is helpful if you have bricked your device, lag, or shuttering performance, fix Bluetooth and WiFi issues, and unroot or bypass the FRP lock. So without wasting our time, let’s understand what a stock firmware flash file is.
Page Contents
Vivo T1x Device Overview:
The Vivo T1x features a 6.58 inches panel with a 120 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2408 pixels and an aspect ratio of 20:9. Under the hood, we get the MediaTek Dimensity 900 processor built on a 6nm manufacturing process. The smartphone comes with Android 11 out of the box with OriginOS skin running on top.
In optics, we get a dual camera setup at the rear and a single selfie camera at the front. The dual rear camera setup consists of a 64 MP primary sensor with an f/1.8 lens and a 2 MP macro sensor with an f/2.4 lens. The selfie camera at the front is an 8 MP primary sensor paired with an f/2.0 lens. The rear camera can capture 4K videos at 30 fps, while the front camera is limited to 1080p video recording.
The smartphone comes with three storage options: 128GB internal storage + 6GB RAM, 128GB internal storage + 8GB RAM and 256GB internal storage + 8GB RAM. We do not get a MicroSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.2, GPS, and USB Type-C. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, gyro, proximity, and compass. Powering it all is a 5,000 mAh battery that can be topped up quickly using a 44W power adapter. The company claims that the phone goes from 0 to 70% in just 38 min. The smartphone has three color options: Black, Aurora, and Silver.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Vivo T1x Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adware from Vivo T1x
- You can fix the boot loop issue on Vivo T1x
- Fix Unfortunately, the app has stopped errors on Vivo T1x
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot Vivo T1x
- To Reset or Remove FRP on your device
- Restore Vivo T1x to Factory State
Firmware Details:
- Device Name: Vivo T1x PD2142F
- ROM Type: Stock ROM
- Gapps File: Included
- Tool Supported: SP Flash tool
- Processor: MediaTek Dimensity 900
- Android Version: Android 11 with FuntouchOS 11
How to Install Vivo T1x PD2142F Flash File
You should download the firmware flash file before installing the Stock ROM on your Vivo T1x. Then download and install the USB Drivers and flash tool on the PC. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: Vivo T1x PD2142F
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup using any method given below
- Download Flash Tool: SP Flash tool
- Download Drivers: VCOM Drivers and Vivo USB Drivers
Download Flash Files
| Firmware Detail | Download Link |
| Flash File Name: PD2142F_EX_A_12.0.10.6 File Size: 4 GB File Type: OTA Android Version: Android 12 |
Download | Mirror |
| Flash File Name: PD2142F_EX_A_12.0.9.4 File Size: 4 GB File Type: OTA Android Version: Android 12 |
Download | Mirror |
| Flash File Name: PD2142F_EX_A_11.0.9.18 File Size: 4 GB File Type: OTA Android Version: Android 11 |
Download | Mirror |
Method 1: Instructions to Install via Recovery:
First, you can try the official method to install the OTA stock ROM update via Vivo device recovery. Follow the guide link given below to install the OTA update on the Vivo device.
Guide to Install Vivo Firmware on any Vivo smartphone
Method 2: Instructions to Install via SP Flash Tool:
- Make sure you follow and download all the required files and flash tools on your PC.
- Open the flash tool exe file to open the SP Flash Tool User Interface
- Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
- Once you load the file, click the Download button
- To start the upgrade process of stock ROM on your Infinix Smart HD X612, you need to turn off your device and hold the Volume Down and Volume Up keys together and Connect your Phone to your PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
- When the phone connects, your device will start upgrading the stock firmware.
- Wait for a few minutes; if you see a green button on your flash tool, it means the upgrading process has been completed.
- That’s it! You can reboot your Infinix Smart HD X612
Follow Complete Tutorial | Watch Video Tutorial
That’s it, guys. We hope you’ve successfully installed the Stock Firmware on your Vivo T1x device. Feel free to ask in the comments below for any queries.
Vivo t1x
Jhku7