Vivo Y22 PD2226F Firmware Flash File (Scatter Stock ROM)

Vivo Y22 was launched in India that features a 6.55-inch LCD display with HD+ resolution. Under the hood, it is powered by a MediaTek Helio G70 SoC coupled with up to 6GB of RAM and up to 128GB of internal storage. The device sports a dual rear camera setup featuring a 50 MP primary camera. The handset has a 50 MP with Eye Autofocus and an f/2.0 aperture lens, and at the front, it gets an 8 MP selfie camera.

In this guide, we have the latest firmware flash file for the Vivo Y22 (PD2226F ) powered by a MediaTek Helio G70 processor. To install the firmware flash file, we need a software called the SP Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.

This process is helpful if you have bricked your device, lag, or shuttering performance, fix Bluetooth and WiFi issues, and unroot or bypass the FRP lock. So without wasting our time, let’s understand what a stock firmware flash file is.

Vivo Y22

Vivo Y22 Device Overview:

The Vivo Y22 features a 6.55 inches IPS panel with a 60 Hz refresh rate. It is an HD+ panel with a resolution of 720 x 1612 pixels and an aspect ratio of 20:9. Under the hood, we get the Mediatek Helio G85 processor built on a 12 nm manufacturing process. It is an octa-core processor with two Cortex-A75 cores clocked at 2.0 GHz and six Cortex-A55 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Mali-G52 MC2. The smartphone comes with Android 12 out of the box with Funtouch 12 skin running on top.

In terms of optics, we get a triple rear camera setup and a single selfie camera at the front. The rear camera setup consists of a 50 MP primary sensor paired with an f/1.8 lens, a 2 MP macro sensor paired with an f/2.4 lens, and a 2 MP depth sensor paired with an f/2.4. The selfie camera at the front is an 8 MP wide sensor paired with an f/2.0 lens. The rear and front camera setups are limited to 1080p video recording at 30 fps.

Advertisements

The smartphone comes in two storage options: 64GB internal storage + 4GB RAM and 128GB internal storage + 6GB RAM. We also get a dedicated microSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 b/g/n, Bluetooth 5.0, GPS, FM Radio, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, compass, and proximity. Powering it all is a 5000 mAh battery that supports 18W quick charge. The smartphone has three color options: Starlite Blue, Metaverse Green, and Summer Cyan.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Vivo Y22 Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adware from Vivo Y22
  • You can fix the boot loop issue on Vivo Y22
  • Fix Unfortunately, the app has stopped errors on Vivo Y22
  • Fix Network related issue
  • Patch Boot image to Root using Magisk
  • You can unroot Vivo Y22
  • To Reset or Remove FRP on your device
  • Restore Vivo Y22 to Factory State

Firmware Details:

  • Device Name: Vivo Y22 PD2226F
  • ROM Type: Stock ROM
  • Gapps File: Included
  • Tool Supported: SP Flash tool
  • Processor: MediaTek Helio G70
  • Android Version: Android 12 with FuntouchOS 12

How to Install Vivo Y22 PD2226F Flash File

You should download the firmware flash file before installing the Stock ROM on your Vivo Y22. Then download and install the USB Drivers and flash tool on the PC. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

Download Flash Files

Firmware Detail Download Link
Flash File Name: PD2226F_EX_A_12.0.13.2
File Size: 4 GB
File Type: OTA
Android Version: Android 12
Download | Mirror

Method 1: Instructions to Install via Recovery:

First, you can try the official method to install the OTA stock ROM update via Vivo device recovery. Follow the guide link given below to install the OTA update on the Vivo device.

Advertisements

Guide to Install Vivo Firmware on any Vivo smartphone

Method 2: Instructions to Install via SP Flash Tool:

  1. Ensure you follow and download all the required files and flash tools on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your Vivo Y22 PD2226F, you need to turn off your device and hold the Volume Down and Volume Up keys together and Connect your Phone to your PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware.
  7. Wait for a few minutes; if you see a green button on your flash tool, the upgrading process has been completed.
  8. That’s it! You can reboot your Vivo Y22 PD2226F

Follow Complete TutorialWatch Video Tutorial

Advertisements

That’s it, guys. We hope you’ve successfully installed the Stock Firmware on your Vivo Y22 device. Feel free to ask in the comments below for any queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.