The Xiaomi 13 is powered by the flagship Qualcomm Snapdragon 8 Gen 2 processor, which is manufactured using a 4nm technology. The chipset comes with Adreno 740. On this page, we will share all the latest Xiaomi 13 (codenamed: fuxi) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash Tool, which works on Windows, Mac, and Linux. You can follow this guide to flash the firmware stock ROM file on Xiaomi 13.
Also Read
Page Contents
Xiaomi 13 Device Overview:
The Xiaomi 13 is a high-end smartphone launched in December 2022. It features a large 6.36-inch touchscreen display with a resolution of 1080×2400 pixels and a refresh rate of 120 Hz. The phone is powered by an octa-core Snapdragon 8 Gen 2 processor and comes with 8GB of RAM and 128GB of internal storage.
The Xiaomi 13 runs MIUI 14 based on Android 13 and is powered by a 4500mAh battery that supports wireless charging and fast charging. The phone has a triple camera setup on the rear, including a 50-megapixel primary camera, a 10-megapixel camera, a 12-megapixel camera, and a 32-megapixel front-facing camera.
Other features of the Xiaomi 13 include IP68 dust and water protection, dual-SIM support, and connectivity options such as Wi-Fi, GPS, Bluetooth, NFC, Infrared, and USB Type-C. The phone also comes with various sensors such as an accelerometer, ambient light sensor, barometer, gyroscope, proximity sensor, and compass/magnetometer. The phone is available in Ceramic White, Ceramic Black, Flora Green, and Mountain Blue colors.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Xiaomi 13 Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adware from Xiaomi 13
- You can fix the boot loop issue on Xiaomi 13
- Fix Unfortunately; the app has stopped errors on Xiaomi 13
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot Xiaomi 13
- To Reset or Remove FRP on your device:
- Restore Xiaomi 13 to Factory State
How to install Stock Firmware on Xiaomi 13
Before installing, follow the pre-requisite and install the necessary drivers and tools on your PC.
Pre-Requisites:
- This Flash File is for Xiaomi 13.
- You should have a working Windows PC/Laptop
- Download and Install the latest Xiaomi USB Driver for Windows and MAC.
- Download and Install the Xiaomi Mi Flash tool on your PC (Fastboot Method)
- Charge your phone to at least 50% before upgrading your phone.
- Take a complete backup of your phone data
Download Flash Files
Global Stable ROM:
Version and Download Link | Changelog |
V14.0.7.0.TMCMIXM |
|
V14.0.4.0.TMCMIXM |
|
Europe Stable ROM:
Version and Download Link | Changelog |
V14.0.19.0.TMCEUXM |
|
V14.0.15.0.TMCEUXM |
|
V14.0.6.0.TMCEUXM |
|
Please note that GetDroidTips cannot be held responsible for any damages, either internal or external, that may occur to your device as a result of following this guide. We advise you to proceed only if you have a good understanding of what you are doing and are confident in your ability to follow the instructions correctly. Your caution and care are appreciated.
Instructions to Flash The ROM:
Advertisement
To install MIUI Flash files on your Xiaomi 13, we have given two methods, either you can follow the recovery method, or you can follow the Fastboot method. A detailed guide on both methods is given below:
Guide to Install Stock ROM On Xiaomi Devices
I hope you installed the firmware file on Xiaomi 13 (fuxi) successfully; now, please rate this website with your comment. We always welcome feedback and improvements.