If you have bought this device and looking to install Stock ROM on Samsung Galaxy M10? then, you are at the right place. Here we will share all the latest Samsung Galaxy M10 Stock Firmware Collections.
Here we have shared the full list of firmware link to download and install stock firmware on Samsung Galaxy M10. As we know, Android is one of the highly customizable software and there is a possibility that we may end up in a situation of lag, boot loop or soft brick. Then, this guide will be helpful. It is always good to keep the Samsung Galaxy M10 stock firmware with you in case something went wrong.
If anyone faces problems like Screen freezing, unresponsive Touch, camera fail or bootloop, you can factory reset or flash the latest Samsung Galaxy M10 Stock Firmware. Check the other advantage of Stock Firmware given below.
If you have bought this device and looking for the fresh installation of Stock ROM, then you can simply grab the download link and flash the firmware on your phone by following the guide.
Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. These feats can be achieved by providing root access to your device or simply rooting your phone. In today’s date, rooting or customizing is no rocket science, but people perform these process carelessly. Certain users hastily carry out the modding/rooting process without properly following instructions. It leads to bricking of the device. It can happen with any device. In this post, we will tell you how you can restore or unbrick Samsung Galaxy M10 back to the previous working condition.
Samsung Galaxy M10 Specifications:
Samsung Galaxy M10 features a 6.21 inches Super AMOLED display with a screen resolution of 1080 x 2248 pixels. The display is protected by Corning Gorilla Glass 5. The device is powered by Qualcomm SDM845 Snapdragon 845 (10 nm) processor under Adreno 630 GPU. The handset packs 128GB variant with 6/8GB of RAM. Samsung Galaxy M10 sports a Dual rear camera with 12MP + 12MP camera and Single Selfie camera with a 20MP depth camera. The smartphone is running on Android 8.1 Oreo under Samsung Experience 9.5 UI software package and backed by 3000 mAh battery. It has a fingerprint reader under the display.
The Advantage of Stock Firmware
- Flash Stock To Unbrick your Samsung Galaxy M10
- Flash Stock ROM to Fix the bootloop problem
- Upgrade and Downgrade Samsung Galaxy M10
- Unroot or Fix Bugs on your phone
- To fix the lag or stutter on Samsung Galaxy M10
- By flashing Stock ROM, you can solve software problems.
- Revert back to stock to gain your warranty.
List of Samsung Galaxy M10 Stock Firmware Collections:
|File Name||Build Number||OS Version|
Steps to flash Stock ROM on Samsung Galaxy M10
Before we get straight to steps to install Stock Firmware on your Samsung Galaxy M10, let us take a look at the prerequisites. Should we?
- Download and Install Samsung Kies Software
- You should have Samsung USB Drivers and install it on your PC.
- Make sure that you have ODIN Software installed on your PC.
- Your Samsung Galaxy M10 should have at least 60% charge left.
- Take a backup of everything on your device just in case something gets wrong.
Now, let us take a look at Steps to flash Stock ROM on Samsung Galaxy M10. Should we?
Disclaimer: We at Getdroidtips.com cannot be held responsible if anything goes wrong. Take your own risk!
In order to flash Stock ROM on Samsung Galaxy M10, you need to follow the below guide carefully:
So that’s it guys, this was our take on Samsung Galaxy M10 Stock Firmware Collections [Back To Stock ROM]. We hope that you found this post useful. Just in case, if you have stuck somewhere between the steps or had any questions related to the topic. Then, feel free to leave them in the comments section down below.