On this page, we will share all the latest MIUI India stable ROM software updates for Poco M3. If you have bought this device in India, then you must install the official India stable ROM.
Also Read
Page Contents
Poco M3 Specifications:
The smartphone features a 6.53 inch IPS LCD with an FHD+ resolution and an aspect ratio of 19.5:9. This is not a high refresh rate panel like some other Poco devices. Under the hood, we have the mid-range Qualcomm Snapdragon 662 which comes with the Adreno 610 GPU. This is not a blazing fast processor by any means, but it can handle most tasks quite easily. It is one of the most widely used processors for mid-range or budget Android devices.
At the back, we get a dual-tone design with one tone holding the triple camera setup. Here, we get a 48 MP primary sensor with an f/1.8 lens, a 2 MP macro sensor with an f/2.4 lens, and a 2 MP depth sensor with an f/2.4 lens. The primary comes with phase detection autofocus for better focus speeds. As for the front side, we get a single 8 MP sensor with an f/2.1 lens. It is housed in a water drop style at the top.
We get two storage variants with the Poco M3 with only a single RAM option: 4GB+64GB and 4GB+128GB. In terms of connectivity, we do get all the basics, Wi-Fi 802.11, Bluetooth 5.0, GPS, Infrared port, FM radio, and USB Type-C 2.0. But the most striking features of the device are its huge 6,000mAh battery and dual speaker setup for stereo. It supports fast charging of up to 18W and one can even charge other devices using the Poco M3, that is it even doubles up as a power bank for other devices. We get three color options with this smartphone: Cool Blue, Poco Yellow, and Power Black.
Check OTA Updates
As the smartphone OEM always pushes the firmware OTA update in batches, most of the users always receive the OTA update notification periodically. The OTA update also depends on the region server and carriers. If you want to keep checking updates then head over to the device Settings > About Phone > Software update.
If available, just download and install the update manually. Also, make sure to charge your battery up to 50% and connected to a Wi-Fi network.
Downloads and Changelog:
V14.0.2.0.SJFINXM
Recovery ROM | Fastboot ROM |
|
V13.0.1.0.SJFINXM
Recovery ROM | Fastboot ROM |
|
V12.0.12.0.QJFINXM
Recovery ROM | Fastboot ROM |
|
V12.5.1.0.RJFINXM (Rolled Back)
Recovery ROM | Fastboot ROM |
System
|
V12.0.6.0.QJFINXM | System
|
V12.0.4.0.QJFINXM
Recovery ROM | Fastboot ROM |
Other
|
V12.0.3.0.QJFINXM | Other
|
V12.0.1.0.QJFINXM
|
Other
|
How to Install MIUI India Stable ROM for Poco M3 (citrus)
Installing the stock ROM or upgrading the MIUI version on Xiaomi devices is comparatively easy. But you should follow all the pre-requirements and downloads below before proceeding.
Pre-Requirements:
- Supported for: Xiaomi Poco M3 (citrus) Indian variant only. The device should be running on stock ROM to apply the update.
- Requires: A PC/Laptop and a USB cable.
- Backup: Take a full Backup of Phone Data at first to keep the important files safe.
- Charge: Keep your device charged more than 50%.
- Mi Flash Tool – Download and Install it on your PC
- Download ADB and Fastboot Tools on your computer
- Download Xiaomi USB Drivers and install it on the PC
[/note]
Disclaimer:
Instructions to Install:
We assume that you’ve followed the downloads and requirements properly. Now, you can proceed to install MIUI India Stable ROM on Poco M3. Check out the guide link below along with a video tutorial as well.
Guide to Install MIUI ROM on Xiaomi Device [Recovery/Fastboot]You can check out our full-depth tutorial video as well:
Video Guide on Steps to Flash Xiaomi Device using Fastboot MethodWe hope that you’ve updated or installed the latest MIUI version on your Poco M3 (citrus) successfully. Feel free to ask in the comments below for any queries.