Motorola Moto G9 Plus Stock Firmware Collections [Back To Stock ROM]

The popular G series from Motorola received a refresh this year, and we now have the G9 series from Motorola. The Motorola Moto G9 Plus was launched on the 7th of September, and it does a lot of things right. The device came out of the box with Android 10 and promised to receive the official Android 11 version.

On this page, we have shared the download link and guide to install the Moto G9 Plus (odessa) firmware flash file using the ADB Fastboot method. To flash the Moto G9 Plus back to stock ROM, you need the stock firmware zip files which you will find here.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Motorola Moto G9 Plus Stock Firmware Collections [Back To Stock ROM]

Moto G9 Plus Specifications:

The Moto G9 Plus features a 6.81-inch IPS LCD panel with support for HDR10. There is no high refresh rate for the display. And we are stuck at the standard 60 Hz. As for the resolution, we have 1080 x 2400 pixels on a screen with an aspect ratio of 20:9. Under the hood, we have the Qualcomm Snapdragon 730G, which is an upper mid-range processor from Qualcomm built on an 8nm manufacturing process. It is an octa-core processor with two Kryo 470 Gold cores clocked at 2.2 GHz and six Kryo 470 Silver cores clocked at 1.8 GHz. And for graphics-intensive tasks, we have the Adreno 618.

It comes with Android 10 out of the box with Moto’s near-stock UI on top of it. There are two storage variants of the phone: 4GB+128GB and 6GB+128GB. But there is a hybrid slot for MicroSD storage expansion. Further, in terms of optics, we have a quad-camera setup at the back, which consists of a 64MP primary sensor paired with an f/1.8 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, a 2 MP depth sensor paired with an f/2.4 lens, and a 2MP macro sensor paired with an f/2.4 lens. This setup is capable of capturing 4K videos at 30 fps and 1080p videos at 30/60/120 fps. Coming to the front, we get a 16 MP sensor with an f/2.0 lens.

Advertisements

In terms of connectivity, we have Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, NFC, FM radio, and USB Type-C 2.0. When it comes to sensors, we have all the basics, including an accelerometer, gyro, proximity, and a side-mounted fingerprint sensor embedded into the power button. The Moto G9 Plus battery is a 5000 mAh cell that supports up to 30W of fast charging. This smartphone is available in two color options: Rose Gold and Indigo Blue. As for the price, the device starts from a price tag of $ 229.99, which translates to roughly around 17,000 INR.

The Advantage of Stock Firmware

  • Flash Stock To Unbrick your Moto G9 Plus
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Moto G9 Plus
  • Unroot or Fix Bugs on your Phone
  • To fix the lag or stutter on Moto G9 Plus.
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Steps to Install Moto G9 Plus Stock Firmware:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requisites:

Disclaimer

We at Getdroidtips.com cannot be held responsible if anything goes wrong. Take your own risk!

Download Flash Files:

Moto G9 Plus Stock Firmware RETAIL:

Build Number Security Patch/Changelog
RPAS31.Q2-59-17-4-3-8 July 2022 Security Patch

Moto G9 Plus Stock Firmware RETLA XT2087-1:

Build Number Security Patch/Changelog
RPAS31.Q2-59-17-4-3-6 May 2022 Security Patch

Moto G9 Plus Stock Firmware RETBR XT2087-1:

Build Number Security Patch/Changelog
RPAS31.Q2-59-17-4-3-8 July 2022 Security Patch

Moto G9 Plus Stock Firmware RETEU XT2087-2:

Build Number Security Patch/Changelog
RPAS31.Q2-59-17-4-3-8 July 2022 Security Patch

Instructions to Install: via ADB Sideload Method

  1. Now go to the folder where you have extracted the ADB and Fastboot Tools.
  2. Download Stock ROM for Moto from the above list of Moto Stock Firmware Collections and save it in the ADB folder.
  3. Now Reboot Moto smartphone to Recovery Mode.
  4. Select Apply Update from ADB.
  5. Plug the Phone into PC using USB Cable, then open a command prompt window by pressing Shift Key + Right Mouse Click
    AMD COMMAND
  6. Now execute the below command on the CMD screen.
    adb sideload Filename.zip
  7. Wait until the Installation process Completes.
  8. Once the installation completed, reboot the Phone.

That’s it! Wait patiently until the flashing process completes if you have any queries related to the flashing process. Please leave a comment down below.

Manually Update Moto G9 Plus Stock Firmware via Recovery

  1. First of all, Go to Settings –> About Phone –> Tap on Build Number 7 Times.
  2. Go to Developer Options –> Enable USB Debugging.
  3. Download Android Nougat for Moto from above and save it in Internal storage.
  4. Now Reboot Moto to Recovery Mode.
  5. Select Apply Update from SD Card.
  6. Select the Downloaded ZIP file from SD Card.
  7. Wait until the Installation process Completes.
  8. Once the installation completed, reboot the Phone.

That’s it!! You have successfully installed Stock Firmware On Moto G9 Plus Smartphone.

I hope you installed the Stock ROM on Moto G9 Plus successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.