Motorola One Fusion Plus (codename: liber, XT2067-2 / XT2067-3 / XT2067-1) was launched in the year September 2020. The phone came out of the box with Android 11.0. Today we will guide you on How to install OmniROM on Motorola One Fusion Plus. This ROM is based on both Android 11 R.
To Install this Custom ROM, you need TWRP Recovery. We had already shared the method to unlock the bootloader and install TWRP Recovery on Motorola One Fusion Plus. If you already installed TWRP, then you probably might be waiting for Custom ROM for Motorola One Fusion Plus. If yes, then here is the popular custom ROM known as Omni ROM.
Table of Contents
Motorola One Fusion+ Device Overview
The Motorola One Fusion+ features a 6.53-inch FHD+ (2,340 x 1,080 pixels) IPS LCD display without a notch as it has the popup selfie mechanism. It’s an IPS LCD with 1080p+ resolution and HDR10 support.
The Motorola One Fusion+ is powered by the Snapdragon 730, an 8 nm chipset that promises CPU and GPU performance upgrades over the Snapdragon 675 (11 nm) utilized in the Hyper. It’s attached to 6GB of RAM and 128 GB storage, which may be expanded by microSD cards up to 1 TB.
On the Camera department, it packs a 16MP sensor and raises up only it’s needed (there’s a fingerprint reader on the rear which will be wont to unlock the phone). The Moto One Hyper is sort of almost like this device, but it does pack a 32MP pop-up selfie cam. On the rear, the main camera is based on a 64MP sensor, a bit like the Hyper. it’s an f/1.8 aperture and a Quad Bayer design for better low light performance. It’s joined by an 8 MP ultrawide-angle camera (118°), a 5MP dedicated macro cam, and a 2MP depth sensor for portraits.
You’ll need to settle for using just one SIM, however, because the phone features a hybrid card slot. The great news is that it also features a 3.5mm headphone jack and an FM receiving set on board, how old-fashioned. There’s no NFC, though. The other wired connector is that the USB-C port, which supports 15W fast charging for the 5,000 mAh battery. For comparison, the Hyper supports 27 W charging in Europe and 45W within the US, but its battery is smaller (4,000mAh).
What’s on OmniROM?
Omni ROM is the latest Custom ROM developed by many developers whom you may already know including Chainfire, Xplodwild, and Dees_Troy. This ROM is based on AOSP (Android Open Source Project) and developed with lots of customization, features, and enhancement. Just like every other custom ROM, Omni ROM also has some unique features:
- Flippable Quick Settings
- Roadrunner mode
- Daydream enhancements
- Integrated Performance Control
- 3D depth Phase Beam
In this guide, we will help you to install Omni ROM on Motorola One Fusion Plus (liber). Full Credits to the developer and Omni ROM team.
Now download and install OmniROM on Motorola One Fusion Plus. This is an Unofficial Omni ROM built from source code by an XDA member. This ROM is still under development so expect some bugs and lags. You can anytime revert back to Stock ROM on Motorola One Fusion Plus by flashing the Stock Firmware.
Remember this is not a stable ROM, but still, you can use it as a daily driver. In Case if you find any issue, you can revert back. The ROM is under development stage, the developer may soon release the stable version anytime soon.
To Install OmniROM on Motorola One Fusion Plus or any Custom ROM, your phone must have TWRP Recovery or any custom Recovery installed. If you don’t have one, then first install TWRP Recovery on your Motorola One Fusion Plus.
Download ROM Package
Android 11 R based OmniROM
The latest iteration of Android has been released just a couple of months back. While you wouldn’t be witnessing any drastic UI overhaul, but there are still plenty of noteworthy features that deserve your attention. These include the changes to the notification sections with a new Conversations tab. Likewise, Android 11 also brings in the ability to schedule dark mode. Then there is also an introduction of the Chat bubbles as well as a native screen recorder.
Moreover, the Power menu has also undergone a complete revamp with the addition of Smart device controls. Furthermore, the One-Time permission set further strengthens user privacy. Then there is a plentitude of under the hood changes (such as New APIs for 5G) that rounds off this latest Android 11 update. As far as the release schedule is concerned, well Pixel devices have already adopted the said update.
Android 10 Q based OmniROM
Android 10 Q is the 10th iteration of Android OS. It brings plenty of new features to the device system like system UI, new gesture navigation, improved privacy and location control. The update also offers enhanced app permissions, foldable display support, security features, system-wide dark mode, etc.
The Android 10 also offers built-in call screening, multi-camera API, smart replies in the notification panel, 5G support, improved call quality, bubble feature, live caption, and more. While the latest version also improves battery life, Focus mode which is similar to the Do Not Disturb mode, etc. Apart from that Android 10 also features 65 new emojis. It also comes with direct audio streaming support to hearing aid devices.
Steps to Install OmniROM on Motorola One Fusion Plus
Follow the pre-requisites to install OmniROM on Motorola One Fusion Plus
- This will work on Motorola One Fusion Plus (Don’t Try this on Any other device):
- Charge your phone up to 80% or 70%.
- Install the Latest Motorola USB Drivers.
- Download ADB Android SDK Platform tool
- You will lose the original ROM or any CUSTOM ROM if you already installed it on your phone. So make sure to Backup your phone using TWRP before doing this step using TWRP or CWM or any Custom Recovery.
- You can also backup all your apps using Titanium Backup or you can Backup without any Root
- Download all the Zip files from below and Place them in your phone’s root of internal memory.
Instructions to Instal
- First of all, you need to Unlock Bootloader on Motorola One Fusion Plus
- Extract the ADB fastboot tool on local drive C
- Now boot into fastboot mode on your device
- Run the adb command window by pressing the Shift key + Right mouse click
- unzip the ROM file and move it inside the ADB folder
- Now run the command below
- Download the file and extract it and flash the images using the commands given below:-
fastboot -w (warning : this will wipe all your data) fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img fastboot flash product product.img fastboot flash vbmeta vbmeta.img fastboot reboot
To Update from Same Custom ROM
fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash system system.img fastboot flash product product.img fastboot flash vbmeta vbmeta.img fastboot reboot
- For more info: Check the XDA thread
That’s it! I hope you have installed the OmniROM on your smartphone. Leave a comment or feedback down below. Thank you!.