Moto G7 Power Software Update: QPOS30.52-29-9 – October 2020

Motorola Moto G7 Power was released by the Lenovo-owned company back in February 2019. The device is another addition to the successful Moto G-series from the company. It packs some decent mid-range specs that will be good enough for a normal user. However, Motorola is not known for rolling out timely updates. In fact, there is no fixed update policy that helps the users of the device when should they expect the updates to arrive on their Motorola Moto G7 Power smartphone. Here comes the picture of this post.

Because in this post, we will give you a complete software update tracker for the Motorola Moto G7 Power smartphone. This is a one-stop-shop for all the updates that are rolled out for the device. So, we would advise the owners of the Motorola Moto G7 Power to keep checking back often this post to keep their devices updated with the latest update. So, without any further ado, let us get us straight into the article itself:

Motorola Moto G7 Power – Device Specifications

Motorola Moto G7 Power comes with Qualcomm Snapdragon 632 chipset which is coupled with 3/4 GB of RAM. It offers 32/64 GB of onboard storage which can be expanded via the dedicated microSD card slot. The display of the device is 6.2-inches at a resolution of 720 x 1570 pixels at an aspect ratio of 19.5:9 and 279 PPI density. The display is protected with Corning Gorilla Glass 3.

In the camera department, it has a single 12MP camera shooter which is capable of recording 4K@30fps and 1080p@30fps. While the front camera is an 8MP lens which is capable of recording 1080p@30fps. Under the hood, the device packs a massive 5000 mAh battery which supports fast charging 15W or 18W. The fingerprint sensor is located on the back of the phone. Out of the box, it comes with Android 9 Pie and is running the latest Android 10 update.

Software Update Tracker

In this section, you will find all the information related to the latest update available for the Motorola Moto G7 Power smartphone. Note that all the latest updates and information about the update will be added to the bottom of the table.

Software Version	Changelog
PPO29.80-27	Pre-loaded firmware
PPO29.80-79	Highlights of the update: Android Security Updates until March 1, 2019
PPO29.114-134	Highlights of the update: Android Security Updates until June 1, 2019
PPOS29.114-134-2	Highlights of this update include: Android security updates up to 1 August 2019
PPOS29.114-134-4	Highlights of this update include: Android security updates up to 1 October 2019
PPOS29.114-134-7	Highlights of this update include: Android security updates up to 1 November 2019
PPOS29.114-134-7-1	Highlights of this update include: Android security updates up to 1 December 2019
PPOS29.114-134-10	Highlights of this update include: Android security updates up to 1 February 2020
PPOS29.114-134-13	Highlights of this update include: Android security updates up to 1 April 2020
QPOS30.52-29-2	Highlights of this update include: Android security updates up to 1 June 2020
QPOS30.52-29-5	Highlights of this update include: Android security updates up to 1 August 2020
QPOS30.52-29-9	Highlights of this update include: Android security updates up to 1 October 2020

How To Check For Updates On Motorola Moto G7 Power?

The updates arrive via OTA in a staggered manner. This means that not all the Motorola Moto G7 Power units will grab the latest updates on time. So, if you have not yet received the update then, it is probably on its way. However, users can go ahead and check for the update by following the below-mentioned steps:

1. Go to Settings.
2. Tap on About Phone.
3. Then go System Updates.
4. If there is a new update available, then tap on it to install.

Steps to Install Firmware on Motorola Moto G7 Power

If you are tired of waiting for the official OTA to arrive on your phone, then you can always manually upgrade your Moto G7 Power with the available firmware package file. Note that you need to download the firmware file from the above-mentioned software update table. Here is a list of pre-requisites that you need to have before you can go ahead and install the firmware manually on your phone.

Prerequisites

• The firmware and this guide are only meant for the Motorola Moto G7 Power.
• You will need a Windows Laptop or PC for this guide.
• Charge your Moto G7 Power to at least 60%.
• It is always recommended to take a backup of your Android Device.You follow the below-mentioned guides:
  • Backup Android Phone Without Root on any device
  • If you have TWRP Recovery, Create and Restore Nandroid Backup using TWRP Recovery
• Download the Qualcomm Flash Image loader tool and install it on your PC.
• Install the Latest Motorola USB Drivers.

Instructions to Install Firmware On Motorola Moto G7 Power

Below are the instructions you need to follow in order to manually install stock firmware on the Motorola Moto G7 Power :

Guide to Install Stock ROM using QFil

Wrap Up!

So, there you have it from my side in this software update tracker for the Motorola Moto G7 Power smartphone. Note that all the latest updates will be added to the software update tracker. So, check back often. Let us know in the comments below if you would like an update tracker for any other smartphone or device. And also do let us know about any link failure.

For more such awesome coverage, you can head over to our check out our Windows Guides, Gaming Guides, Social Media Guides, iPhone, and Android Guides to read more. Make sure to subscribe to our YouTube Channel for awesome videos related to Android, iOS, and Gaming. Until the next post…Cheers!