How to Install Stock ROM on Teclast P10S 4G N4H3 [Firmware Flash File]

If you’re the Teclast P10S 4G N4H3 user and looking for the official Stock Firmware to download, you can follow this full guide below. Here you can check How to Install Stock ROM on Teclast P10S 4G [Firmware flash file]. We have also put up the stock firmware advantages, firmware info, and requirements for your ease.

Android is full of customizations and tweaks that all the users can easily perform. But users have to follow the guide and step-by-step process properly in order to done customization successfully. Unfortunately, some of the users may not follow the proper steps or don’t flash the compatible file on their devices during Custom ROM installation or rooting, etc. Therefore, their devices can be easily bricked or stuck into the bootloop issue.

In that case, it’s highly recommended to unbrick their devices or fix the bootloop issue at first by flashing the Stock ROM again. Even if your device is having an issue with the software performance or overheating or network drop or battery charging or anything else, you should re-install the Stock ROM. As the Teclast P10S 4G device runs on MediaTek chipset, we will provide you the firmware installation method using the SP Flash Tool.

Steps to Install Stock ROM on Teclast P10S 4G N4H3

Before installing the Stock ROM on your Teclast P10S 4G, you should download the firmware file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Stock ROM Advantages

Stock ROM comes by default on a smartphone or tablet device that usually runs on an operating system like Android OS. All the device OEMs provide the specially crafted and compatible firmware version for each and every model. It also offers a more stable and smoother user experience which you may not find on Custom Firmware.

• Fix Bootloop issue on Teclast P10S 4G
• Bricked your Teclast P10S 4G? Unbrick by following this tutorial
• Upgrade or Downgrade the software version on Teclast P10S 4G
• Can unroot the device
• Fix software related issues or bugs
• Get back the device warranty again, if under warranty period

Pre-Requirements:

• We assume that you’ve downloaded the firmware file and installed the other drivers & tools on your PC.
• This Stock ROM file is exclusive for the Teclast P10S 4G model only.
• Try to charge your device more than 60% at least.
• Take a Full Data Backup without Root before doing anything.
  • If TWRP Recovery already installed, keep a Nandroid Backup via TWRP.
• You will require a computer and a USB data cable.

Firmware Installation Steps

Now, without wasting anymore time, let’s jump into the firmware installation steps below:

Flash Stock ROM using the SP Flash Tool

Follow our full-depth video guide below:

Video Guide to Install Stock ROM via SP Flash Tool

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Teclast P10S 4G device successfully. Feel free to ask in the comments below for any queries.