This page has the official stock firmware for the Tecno Phantom 6 Plus (model A9), which runs on Android 6.0 Marshmallow. It flashes with SP Flash Tool (the Smartphone Flash Tool), since the phone uses the MediaTek MT6797 Helio X20 chipset.
Reflashing the stock firmware is the way to recover the phone after a mod or root has gone wrong, or to put it back to its original state. Anything you do by following this guide is at your own risk.
Why flash the stock firmware
The stock firmware (stock ROM) is the official software the manufacturer builds for a specific phone. It is what you flash to fix a software problem on the Tecno Phantom 6 Plus, and reflashing it is the usual last resort when something goes wrong, especially after rooting, installing mods, or flashing a custom ROM.
Why flash stock firmware
- Unbrick a dead Tecno Phantom 6 Plus
- Repair the IMEI using the DB files from the stock ROM
- Remove malware or adware
- Fix a boot loop
- Fix “Unfortunately, the app has stopped” errors
- Fix network problems
- Patch the boot image to root with Magisk: MediaTek guide
- Unroot the phone
- Restore the phone to its factory state
Firmware details
- Device: Tecno Phantom 6 Plus (A9)
- ROM type: Stock ROM
- GApps: Included
- Tool: SP Flash Tool
- Processor: MediaTek MT6797 Helio X20
- Android: 6.0 Marshmallow
How to install the Tecno Phantom 6 Plus flash file
Before you start, download the firmware, the USB drivers, and the flash tool onto your PC, then go through the prerequisites below.
GetDroidTips is not responsible for any error or problem that happens to your device while or after installing this firmware. Proceed at your own risk.
Advertisement
Pre-requisites
- Supported device: Tecno Phantom 6 Plus (A9)
- Charge the phone to at least 50% before flashing.
- A PC or laptop with a USB cable.
- Take a full backup using one of these methods:
- Download the drivers and tools: VCOM drivers, SP Flash Tool, and Tecno USB drivers.
Download firmware files
The builds below are hosted on the Hovatek firmware thread for the Tecno Phantom 6 Plus (A9), which has the full set of factory ROMs with working download links.
| Software Details | Download Link |
| Flash File Name: A9-H971A1-M-161205V97 Android Version: 6.0 Marshmallow |
Download |
| Flash File Name: Tecno_A9_MT6797_V108_170103.zip Android Version: 6.0 Marshmallow |
Download |
| Flash File Name: A9-H971A1-M-170227V114.zip Android Version: 6.0 Marshmallow |
Download |
How to install: SP Flash Tool
- Download all the required files and the flash tool onto your PC, and extract the firmware.
- Open the SP Flash Tool executable to launch its interface.

- On the Download tab, load the download agent and the scatter text file in the scatter-loading section.

- The scatter text file is inside the ROM package in most cases. If it is missing, you can create one.
- Once it is loaded, click the Download button.

- Power off the phone, then hold Volume Down + Volume Up together and connect it to the PC with a USB cable. Keep holding until the PC detects the phone.
- The phone starts flashing the firmware.
- Wait a few minutes for it to finish.
- A green tick means the flash is complete.

- That is it. Reboot the Tecno Phantom 6 Plus.
Video Guide to Install Stock ROM via SP Flash Tool
FAQ
Will flashing the firmware erase my data?
Yes, flashing with SP Flash Tool wipes the phone, so back up anything you want to keep first.




Hi, I have flashed Techno Phantom 6 Plus with the STOCK ROM having experienced a boot loop after an upgrade. However this did not resolve the boot loop even after clearing the cache and factory reset through the recovery. How else can I resolve this problem? Thanks