Are you looking to install the firmware file on Tecno Spark 2 KA7? Then you are just in the right place. In this post, we have brought you the latest stock firmware for the Tecno Spark 2 KA7.
These days installing custom ROMs, rooting the device is a pretty common scenario among smartphone enthusiasts. However, not every day is a sunny day. Usually, while customizing your device you may have performed some wrong steps and ended up with a bricked device or a phone stuck in the endless boot loop. Sometimes the new custom OS you install brings a lot of unforeseen bugs. So, the only solution is to take the device back to its previous state. This technically means flashing the stock firmware on the smartphone.
Talking of the Tecno Spark 2, we have put up the latest stock firmware of the phone along with the flash tool and a complete tutorial to help you install the stock ROM correctly on the device. We have laid out all the instructions in a simple and detailed manner. So, it should be a cakewalk for you to install stock ROM on Tecno Spark 2 KA7.
Page Contents
Tecno Spark 2 KA7 Firmware Flashing Guide
Installing a stock ROM is pretty easy. All you have to do is download the stock ROM for the corresponding device. Then grab the USB drivers, an exclusive flash tool that we will use for performing the installation. Talking of the flash tool, we are using the SP Flash tool in this guide because the Tecno Spark 2 runs on the MediaTek chipset.
You will also require some other tools which we have listed out below. You have to download and install them as instructed. Before getting on towards the installation, let’s find out the importance of stock ROM.
Why Stock ROM is important.?
A stock ROM is an OS which the device runs when it’s unboxed. It’s the pre-built operating system. So, by flashing the stock ROM, you would literally take back the device to its original working state.
- A stock ROM can fix the device boot loop issue
- If your phone is bricked, then you can unbrick it by flashing the device with the latest stock ROM
- You can upgrade/downgrade the OS of your device via flashing a stock ROM only.
- it is important during unrooting the device and going back to stock
Firmware Details:
- Device Name: Tecno Spark 2 KA7
- ROM Type: Stock ROM
- Gapps File: Included
- Tool Supported: SP Flash Tool
- Chipset: MediaTek MT6580
- Android Version: Android 8.1 Oreo
How to Flash Firmware File on Tecno Spark 2
As mentioned before, here is the list of flash tool and other software which are important to successfully install stock ROM on Linx Alfa 3G from Tecno.
Requisites Before Installation
- The stock ROM provided in this guide is exclusively for Tecno Spark 2. Do not use it on any other device.
- Before installing the stock ROM charge the battery of your device up to 50%.
- You need a Laptop or PC
- Don’t forget to take a backup of your device data. Backup without root | Nandroid Backup via TWRP
- Download VCOM Driver: MTK VCOM Driver
- Flash tool: Download the SP Flash tool
- Drivers: Download Android USB drivers
Download Firmware Files:
Software Details | Download Link |
Flash File Name: Tecno_Spark_2_KA7_MT6580_V173_181012.zip File Size: 1.5 GB Android Version: 8.1 Oreo |
Download Link |
Flash File Name: Tecno_Spark_2_KA7_MT6580_V169_180906.zip File Size: 1.5 GB Android Version: 8.1 Oreo |
Download Link |
Flash File Name: Tecno_Spark_2_KA7_MT6580_V128_180810.zip File Size: 1.5 GB Android Version: 8.1 Oreo |
Download Link |
Flash File Name: Tecno_Spark_2_KA7_MT6580_V109_180515.zip File Size: 1.5 GB Android Version: 8.1 Oreo |
Download Link |
Guide for Firmware Installation
The tutorial linked below will guide you to flash the latest stock ROM on the device.
Flash stock ROM using the SP Flash toolYou can also check out our full depth video tutorial as well.
Video Guide to Install Stock ROM via SP Flash ToolSo, guys.! We hope that this tutorial to install stock ROM on Tecno Spark 2 was useful to you. Install the firmware and enjoy. If you ahve any queries do let us know in the comments section.