On this page, we will guide you on how to install the official firmware flash file on your Teclast M40 Pro (M1A1 / M1C3). Well, the device is based on Android 11.0, which the Spreadtrum UNISOC Tiger T618 processor powers. This guide will be helpful to unbrick or fix any software issues on your device.
To install the firmware flash file on Teclast M40 Pro (M1A1 / M1C3), you need to download the software called SPD Flash tool (also known as Spreadtrum Flash tool). This method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the firmware file.
Page Contents
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Teclast M40 Pro Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adwares from Teclast M40 Pro
- You can fix the boot loop issue on Teclast M40 Pro
- Fix Unfortunately, the app has stopped errors on Teclast M40 Pro
- Fix Network related issue
- Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
- You can unroot Teclast M40 Pro
- To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
- Restore Teclast M40 Pro back to Factory State
How to Flash Teclast M40 Pro (M1A1 / M1C3) Firmware File
Before installing the Stock ROM on your Teclast M40 Pro, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: Teclast M40 Pro
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup of your android phone
- Download Drivers and Tools: Spreadtrum drivers, SPD Flash Tool, and Teclast USB Drivers
Teclast M40 Pro M1C3 Flash Files
| Software Details | Download Link |
| Flash File Name: M40 Pro(M1C3)_Android 12.0_EEA V1.02_20230415 Region: Global File Size: 1.4 GB Android Version: 12.0 |
Download Link |
| Flash File Name: M40 Pro(M1C3)_Android 12.0_ROW V1.00_20230418 Region: Global File Size: 1.4 GB Android Version: 12.0 |
Download Link |
Teclast M40 Pro M1A1 Flash Files
| Software Details | Download Link |
| Flash File Name: V1.03_20210804.zip Region: Global File Size: 1.4 GB Android Version: 11.0 |
Download Link |
| Flash File Name: V1.03_20210804.zip Region: Europe File Size: 1.4 GB Android Version: 11.0 |
Download Link |
Instructions to Install: via SPD Flash tool
Now, without wasting any more time, let’s jump into the firmware installation steps below:
That’s it, guys. We hope that you’ve installed the Stock Firmware on your Teclast M40 Pro (M1A1 / M1C3) device successfully. Feel free to ask in the comments below for any queries.