Vivo V20 PD2039F Test Point | Reboot to EDL Mode 9008

Did you get the Vivo V20 (codenamed PD2039F) smartphone? Then this guide will be useful to you. If you have bricked your device, lost your pattern lock details, or are not able to verify your Google account after the hard reset, then you can bypass it quickly using this guide.

You can easily get the ISP PinOUT connection of the Vivo V20 by following the full guide below along with images. By using the ISP PinOUT, you can easily restore the stock ROM, bypass FRP lock, or reset user data on your device via UFi Box. In this guide, we will also guide on how to reboot into 9008 EDL Mode.

The Vivo V20 model has a 6.44-inches AMOLED Full-HD+ display, Android 11 (Funtouch SO 11), Qualcomm Snapdragon 720G SoC, Adreno 618 GPU, 8GB of RAM, 128GB of internal storage with a dedicated microSD card slot, triple rear 64MP+8MP+2MP cameras, a 44MP selfie shooter, etc. It also features a 4,000mAh battery with 33W fast charging, an optical under-display fingerprint sensor, an accelerometer, an ambient light sensor, gyro, proximity, compass sensor. While it has a 3.5mm audio jack, Wi-Fi, BT5.1, GPS, A-GPS, Type-C, NFC.

Also Read: Unlock Bootloader, Root Custom ROM for Vivo V20, V20 Pro and V20 SE

What is ISP PinOUT?

ISP or In-system programming also known as in-circuit serial programming (ICSP) for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile, computer. You will find the IS Pinout connection on the logic board of your device. Therefore, you will need to remove the back panel of the handset and follow the below image to locate the pinout.

Vivo V20 PD2039F ISP Test Point Image:

Vivo V20 PD2039F Test Point | Reboot to EDL Mode 9008

How to Enter EDL Mode on Vivo V20

Follow this instruction carefully to boot your device into EDL Mode (aka Emergency DownLoad Mode)

Method 1: Using ADB

  • Download ADB and Fastboot Tool and extract it to your PC (C:/ Drive)
  • Connect your device to your PC
  • Open the adb command and enter the command
    .\adb reboot edl

Method 2: Using Fastboot

  • Download ADB and Fastboot Tool and extract it to your PC (C:/ Drive)
  • Boot your device into the bootloader
  • Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
  • now enter the command
    .\fastboot oem edl

Method 3: By Hardware Test Points / Restore Your device

  • Download the QDLoader driver
  • Find the EDL PinOUT/Test Point on your device (refer to image above to find the test point)
  • To enter EDL mode, you need to use a metal tweezer or a conductive metal wire to short the points.
  • Once you are done, connect your device to PC using a USB cable
  • This way, your device will enter EDL mode. Now you can open the QFil or QPST Tool to flash the firmware and restore your device.

I hope this guide was helpful to find the Vivo V20 PD2039F ISP Testpoints.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.