Vivo X80 was launched in India and is the successor of last year’s Vivo X70 series. The device runs on Android 12-based OriginOS. Vivo X80 features a 6.78-inch Full HD+ AMOLED display with a 120 Hz refresh rate. It is powered by a MediaTek Dimensity 9000 SoC coupled with up to 12GB RAM.
In this guide, we have the latest firmware flash file for the Vivo X80 (PD2183F ) powered by a MediaTek Dimensity 9000 processor. To install the firmware flash file, we need a software called the SP Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.
This process is helpful if you have bricked your device, lag, or shuttering performance, fix Bluetooth and WiFi issues, and unroot or bypass the FRP lock. So without wasting our time, let’s understand what stock firmware flash file is.
Page Contents
Vivo X80 Device Overview:
The Vivo X80 features a 6.78 AMOLED panel with a 120 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. The screen has a peak brightness of 1500 nits. Under the hood, we get the MediaTek Dimensity 9000 processor built on a 4nm manufacturing process. It is an octa-core processor with one Cortex-X2 core clocked at 3.05 GHz, three Cortex-A710 cores clocked at 2.85 GHz, and four Cortex-A510 cores clocked at1.80 GHz. For handling the graphics-intensive tasks, we have the Mali-G710 MC10. The smartphone comes with Android 12 out of the box with Funtouch or Origin skin running on it.
In optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple camera setup consists of a 50 MP primary sensor paired with an f/1.8 lens, a 12 MP telephoto sensor paired with an f/2.0 lens, and a 12MP ultrawide sensor paired with an f/2.0 lens. There is also OIS in the primary sensor here. The rear camera setup can capture 4K videos at 60 fps, while the front camera is limited to 4K videos at 30 fps.
The smartphone comes in four storage options: 128GB internal storage + 8GB RAM, 256GB internal storage + 8GB RAM, 256GB internal storage + 12GB RAM, and 512GB internal storage + 12GB RAM. We also do not get a hybrid microSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.3, GPS, NFC, Infrared port, USB Type-C 2.0. And for sensors, we get an under-display fingerprint sensor, accelerometer, gyro, proximity, compass, and color spectrum. Powering it all is a 4500 mAh battery that can be topped up quickly using an 80W power adapter included in the box. The smartphone has three color options: Cosmic Black, Urban Blue, and Orange.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Vivo X80 Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adware from Vivo X80
- You can fix the boot loop issue on Vivo X80
- Fix Unfortunately, the app has stopped errors on Vivo X80
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot Vivo X80
- To Reset or Remove FRP on your device
- Restore Vivo X80 to Factory State
Firmware Details:
- Device Name: Vivo X80 PD2183F
- ROM Type: Stock ROM
- Gapps File: Included
- Tool Supported: SP Flash tool
- Processor: MediaTek Dimensity 9000
- Android Version: Android 12 with FuntouchOS 12
How to Install Vivo X80 PD2183F Flash File
You should download the firmware flash file before installing the Stock ROM on your Vivo X80. Then download and install the USB Drivers and flash tool on the PC. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: Vivo X80 PD2183F
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup using any method given below
- Download Flash Tool: SP Flash tool
- Download Drivers: VCOM Drivers and Vivo USB Drivers
Download Flash Files
| Firmware Detail | Download Link |
| Flash File Name: PD2183F_EX_A_12.0.13.12 File Size: 5.7 GB File Type: OTA Android Version: Android 12 |
Download | Mirror |
| Flash File Name: PD2183F_EX_A_12.0.12.8 File Size: 6 GB File Type: OTA Android Version: Android 12 |
Download | Mirror |
| Flash File Name: PD2183F_EX_A_12.0.9.6 File Size: 6 GB File Type: OTA Android Version: Android 12 |
Download | Mirror |
Method 1: Instructions to Install via Recovery:
First, you can try the official method to install the OTA stock ROM update via Vivo device recovery. Follow the guide link below to install the OTA update on the Vivo device.
Guide to Install Vivo Firmware on any Vivo smartphone
Method 2: Instructions to Install via SP Flash Tool:
- Ensure you follow and download all the required files and flash tools on your PC.
- Open the flash tool exe file to open the SP Flash Tool User Interface
- Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
- Once you load the file, click the Download button
- To start the upgrade process of stock ROM on your Vivo X80, you need to turn off your device and hold the Volume Down and Volume Up keys together and Connect your Phone to your PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
- When the phone connects, your device will start upgrading the stock firmware.
- Wait for a few minutes; if you see a green button on your flash tool, the upgrading process has been completed.
- That’s it! You can reboot your Vivo X80
Follow Complete Tutorial | Watch Video Tutorial
That’s it, guys. We hope you’ve successfully installed the Stock Firmware on your Vivo X80 device. Feel free to ask in the comments below for any queries.