Vivo X90 was launched globally with Android 13 out of the box and is powered by MediaTek’s Dimensity 9200 SoC. The phone has a 6.78-inch curved 3D AMOLED display with 120Hz refresh rates and packs up to 12GB of RAM and 256GB of onboard storage. Vivo X90 supports 120W fast charging, backed by a 4,810mAh battery.
This guide has the latest firmware flash file for the Vivo X90 (PD2241F) powered by MediaTek’s Dimensity 9200 processor. To install the firmware flash file, we need a software called the SP Flash tool, which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.
This process is helpful if you have bricked your device, lag, or shuttering performance, fix Bluetooth and WiFi issues, and unroot or bypass the FRP lock. So, without wasting time, let’s understand what a stock firmware flash file is.
Page Contents
Vivo X90 Device Overview:
The Vivo X90 comes with impressive specifications, ensuring it meets the needs of various users. It operates on a 4nm MediaTek Dimensity 9200, supported by up to 12GB of LPDDR5 RAM and a G715 GPU, and the device runs with the Vivo V2 chip specifically for image processing. The device will receive three years of Android and security updates.
Regarding display, the Vivo X90 boasts a Zeiss branded triple rear camera setup, including a 50-megapixel primary Sony IMX866 sensor with an f/1.75 lens and OIS, a 12-megapixel Sony IMX663 portrait camera with an f/2.0 lens, and another 12-megapixel Sony IMX663 ultra-wide-angle camera, also with an f/2.0 lens. Additionally, selfie enthusiasts can make good use of the 32-megapixel front-facing camera.
The device offers up to 256GB of UFS4.0 inbuilt storage, ensuring ample space for all your apps and media. The connectivity features of the Vivo X90 are extensive, including 5G, Wi-Fi 6, Bluetooth 5.3, NFC, GPS, and a USB Type-C port. A range of sensors are included, such as an accelerometer, ambient light sensor, ambient color temperature sensor, e-compass, gyroscope, infrared blaster, and ultrasonic distance sensor, and it offers an IP64 rating, providing a degree of protection against dust and water.
To support prolonged usage, the Vivo X90 is powered by a 4,810mAh battery with 120W fast charging support, allowing for up to 22.2 days of standby time on a single charge. The dimensions of the Vivo X90 are 164.10×74.44×8.48/8.88mm, and its weight is 201/196 grams.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Vivo X90 Stock ROM flash file on your computer.
- If your device is dead, you can unbrick it using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adware from Vivo X90
- You can fix the boot loop issue on the Vivo X90
- Fix: Unfortunately, the app has stopped errors on the Vivo X90
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot Vivo X90
- To Reset or Remove FRP on your device
- Restore Vivo X90 to Factory State
Firmware Details:
- Device Name: Vivo X90 PD2241F
- ROM Type: Stock ROM
- Gapps File: Included
- Tool Supported: SP Flash tool
- Processor: MediaTek’s Dimensity 9200
- Android Version: Android 13
How to Install Vivo X90 PD2241F Flash File
You should download the firmware flash file before installing the Stock ROM on your Vivo X90. Then, download and install the USB Drivers and flash tool on the PC. Once you finish these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: Vivo X90 PD2241F
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup using any method given below
- Download Flash Tool: SP Flash tool
- Download Drivers: VCOM Drivers and Vivo USB Drivers
Download Flash Files
| Firmware Detail | Download Link |
| Flash File Name: PD2241F_EX_A_13.0.15.2 File Size: 4 GB File Type: OTA Android Version: Android 13 |
Download | Mirror |
| Flash File Name: PD2241F_EX_A_13.0.14.23 File Size: 4 GB File Type: OTA Android Version: Android 13 |
Download | Mirror |
Method 1: Instructions to Install via Recovery:
First, you can try the official method to install the OTA stock ROM update via Vivo device recovery. Follow the guide link given below to install the OTA update on the Vivo device.
Guide to Install Vivo Firmware on any Vivo smartphone
Method 2: Instructions to Install via SP Flash Tool:
- Ensure you follow and download all the required files and flash tools on your PC.
- Open the Flash tool exe file to open the SP Flash Tool User Interface
- Tap the Download option and load both the download agent and the scatter text file in the scatter-loading section.
- Once you load the file, click the Download button.
- To start the upgrade process of stock ROM on your Vivo X90 PD2241F, you need to turn off your device, hold the Volume Down and Volume Up keys together, and Connect your Phone to your PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
- When the phone connects, your device will start upgrading the stock firmware.
- Wait for a few minutes; if you see a green button on your flash tool, the upgrading process has been completed.
- That’s it! You can reboot your Vivo X90 PD2241F
Follow Complete Tutorial | Watch Video Tutorial
That’s it, guys. We hope you’ve successfully installed the Stock Firmware on your Vivo X90 device. Feel free to ask in the comments below.