On this page, we provide a step-by-step guide on how to install the unofficial Android 14 Custom ROM on the Samsung Galaxy Tab S6 Lite, codenamed “gta4xl/gta4xlwifi. If you’re looking to install the pure version of Android 14, then you’re in the right place.
Page Contents
Samsung Galaxy Tab S6 Lite Overview
The Samsung Galaxy Tab S6 Lite features a massive 10.4 inches IPS LCD featuring a Full HD+ resolution. And it results in a pixel size of 1200 x 2000, an aspect ratio of 5:3, and a pixel density of 224 Pixel Per Inch ( PPI ). Coming to the internals of Samsung Galaxy Tab S6 Lite, it comes with the common Exynos 9611 SoC that we have already seen on a couple of Samsung smartphones. As you know, this SoC is built on the 10nm process and has an octa-core setup. This setup includes four Cortex A73 cores clocked at 2.3GHz, and the other four Cortex A53 cores clocked at 1.7GHz.
To the GPU side, this SoC pairs with the Mali G72 MP3 GPU. Talking about the memory options, the device comes only with 4GB of RAM. While it comes with 64GB and 128GB of internal storage. Further, there is also an option to expand the room via the dedicated micro SD card slot. This new tablet runs on the latest One Ui 2.0, which uses the new Android 10 as the base.
Speaking about the Camera, Samsung Galaxy S6 Lite features a single rear camera. It is not a drawback since most of the tablets are not camera-centric like smartphones. This setup includes an 8MP sensor with a pixel size of 1/4″, 1.12µm. Of course, the rear camera can shoot HDR photos and also can take panorama shots. To the front, the device sports a 5MP sensor, which can shoot videos up to 1080P @ 30fps.
This new tab, i.e., the Samsung Galaxy Tab S6 Lite, packs a massive 7,040 mAh battery that charges over the USB type C port. This battery also comes with support for 15W fast charging tech. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, Bluetooth 5.0, A2DP, LE, GPS with A-GPS, GLONASS, BDS, GALILEO, NFC, USB 3.1, and Type-C 1.0 reversible connector. Unfortunately, there is no support for FM radio in this device.
Android 14 and Its Features
Android 14, Google’s fourteenth major iteration and the 21st version of its renowned operating system, was unveiled to the public on October 4. The pioneering devices graced with this fresh release were the Pixel 8 and Pixel 8 Pro, underscoring Google’s commitment to keeping its flagship devices at the technological forefront.
This latest installment boasts a plethora of enhancements and innovative features. Among the standout additions are a revamped lock screen, a more intuitive system share sheet, and a redesigned battery-saving mode. Users can also delight in the convenience of drag-and-drop capabilities during app switches, a groundbreaking Ultra HDR support for media, and the visually striking Material You-themed settings toggles. With AI-generated wallpapers and a new monochromatic theme, Android 14 not only refines functionality but also offers a refreshed aesthetic experience.
What’s Working and Known Bugs:
Whats working? Wi-Fi RIL Volte Mobile data GPS Camera Flashlight Camcorder Bluetooth Fingerprint FM radio Sound vibration Known issues ? * Hotspot may lag out when trying to turn it off
How To Install AOSP Android 14 on Galaxy Tab S6 Lite (gta4xl/gta4xlwifi)
As the title indicates, this article provides the necessary steps and requirements to install the AOSP Android 14 build on the Galaxy Tab S6 Lite (gta4xl/gta4xlwifi) model.
Before diving into the guide, please ensure you’ve met all the prerequisites listed below.
Pre-Requisites
Before we begin this procedure, I strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.
Charge Your Phone
It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Keep at least 50% of the charge or higher for a smooth operation.
Download ADB and Fastboot Binaries
You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Galaxy Tab S6 Lite.
Using the ADB and Fastboot commands (platform-tools), you can boot your Android device into the bootloader mode (download mode), making it easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and the computer to sideload files.
Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).
Download Samsung USB Drivers
To create a strong and successful connection between a mobile device and a computer using a USB data cable, you will need a USB Driver. It is essentially a set of files that enables you to transfer files between the connected devices, flash files on the handset, and much more.
It is important to note that USB drivers can be utilized and operated by mobile devices and other external devices on a Windows computer. These include but are not limited to mice, keyboards, printers, external hard drives, speakers, and USB flash drives. If you need to download Samsung USB drivers, you can find them here.
Unlock the Bootloader of Your Phone:
You need to unlock the Galaxy Tab S6 Lite’s bootloader before installing custom ROMs.
Install TWRP Recovery:
You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Galaxy Tab S6 Lite.
Download Android 14 ROM:
You will find all the Android 14 custom ROMs for your Galaxy Tab S6 Lite (gta4xl/gta4xlwifi) here.
| DerpFest 14 (Exynos) | XDA Development Page |
| Lineage OS 21 (Exynos) | XDA Development Page |
| Lineage OS 21 (Qualcomm) | XDA Development Page |
Download Android 14 Gapps:
Most third-party AOSP ROMs, also known as aftermarket firmware, do not include preinstalled Google apps. You can manually install Android 14 GApps with our guide.
Warning!
GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.
Instructions To Install:
- Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
- Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
- Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:
adb reboot recovery
- Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.
TWRP Home - If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
- When that is done, you may reboot your device. Head over to Reboot and select System.
The installation of AOSP Android 14 on Galaxy Tab S6 Lite is complete, and your device will now boot with the newly installed OS. It’s worth noting that the first boot may take some time, and you may need to set up your device from scratch. With that, our guide to installing AOSP Android 14 on Galaxy Tab S6 Lite comes to an end.
Conclusion
If you want to try out the latest Android OS version on your Galaxy Tab S6 Lite, flashing the ported Android 14 is an option. Although it seems like the Galaxy Tab S6 Lite won’t receive the official Android 14 update from the manufacturer, you can still enjoy most of the features and visual treatment with this ported version. However, if you encounter any bugs or stability issues, it’s important to report them to the respective forum.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.