On this page, we provide a detailed, step-by-step guide on how to install the unofficial Android 14 Custom ROM on the Motorola Moto G40 Fusion, codenamed “hanoip.” If you’re looking to experience the pure version of Android 14, you’re in the right place.
The Moto G40 Fusion is one of Motorola’s most affordable smartphones, launched alongside the Moto G60. It boasts a 120Hz display, a large 6,000mAh battery, and is powered by the Qualcomm Snapdragon 732G octa-core processor, paired with up to 6GB of RAM for smooth performance. In terms of photography, the Moto G40 Fusion features a triple rear camera setup, consisting of a 64MP primary sensor with an f/1.7 lens, an 8MP ultra-wide-angle sensor with an f/2.2 lens, and a 2MP depth sensor, ensuring versatility in capturing high-quality images.
With this guide, you’ll be able to upgrade your device with a custom Android 14 ROM and enjoy the latest features and performance enhancements.
Motorola Moto G40 Fusion Overview
The Moto G40 Fusion features a 6.8-inch IPS LCD panel with a resolution of 1080 x 2460 pixels. The screen refreshes at 120Hz, and it is an HDR10 display. Yes, we don’t get the deep blacks of AMOLED, but the high refresh rate of 120Hz is a good addition from Motorola. Under the hood, we have the Qualcomm Snapdragon 732G based on an 8nm manufacturing process. It is an octa-core processor with two Kryo 470 Gold cores clocked at 2.3 GHz and six Kryo 470 Silver cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Adreno 618.
Coming to the cameras, we have a triple camera setup at the rear and a single camera at the front. The triple setup consists of a 64MP primary sensor paired with an f/1.7 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, and a 2MP depth sensor paired with an f/2.4 lens. Coming to the front, we get a 16MP primary sensor paired with an f/2.2 lens. Both the front and rear camera setups are capable of 4K recording, but the rear camera can do it in 120fps while the front is only limited to 30fps.
The smartphone runs on Android 11 out of the box. It comes in two storage variants: 64GB internal storage + 4GB RAM and 128GB internal storage + 6GB RAM. In terms of communications, we have Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, NFC, Radio, and USB Type-C 2.0. For sensors, we have a rear-mounted fingerprint sensor, accelerometer, gyro, and proximity. The battery inside the smartphone is a 6,000 mAh cell which should easily get you through a full day of extensive usage. The smartphone can be charged quickly, too, using the 20W charging adapter included in the box. The smartphone is available in two color options: Dynamic Gray, Frosted Champagne.
Android 14 and Its Features
Android 14, Google’s fourteenth major iteration and the 21st version of its renowned operating system, was unveiled to the public on October 4. The pioneering devices graced with this fresh release were the Pixel 8 and Pixel 8 Pro, underscoring Google’s commitment to keeping its flagship devices at the technological forefront.
This latest installment boasts a plethora of enhancements and innovative features. Among the standout additions are a revamped lock screen, a more intuitive system share sheet, and a redesigned battery-saving mode. Users can also delight in the convenience of drag-and-drop capabilities during app switches, a groundbreaking Ultra HDR support for media, and the visually striking Material You-themed settings toggles. With AI-generated wallpapers and a new monochromatic theme, Android 14 not only refines functionality but also offers a refreshed aesthetic experience.
What’s Working and Known Bugs:
Whats working? Wi-Fi RIL Volte Mobile data GPS Camera Flashlight Camcorder Bluetooth Fingerprint FM radio Sound vibration Known issues ? You Tell Us
How To Install AOSP Android 14 on Moto G40 Fusion (hanoip)
As the title indicates, this article provides the necessary steps and requirements to install the AOSP Android 14 build on the Moto G40 Fusion (hanoip) model.
Before diving into the guide, please ensure you’ve met all the prerequisites listed below.
Pre-Requisites
Before we begin this procedure, I strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.
Charge Your Phone
It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Keep at least 50% of the charge or higher for a smooth operation.
Download ADB and Fastboot Binaries
You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Moto G40 Fusion.
Using the ADB and Fastboot commands (platform-tools), you can boot your Android device into the bootloader mode (download mode), making it easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and the computer to sideload files.
Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).
Download Motorola USB Drivers
To create a strong and successful connection between a mobile device and a computer using a USB data cable, you will need a USB Driver. It is essentially a set of files that enables you to transfer files between the connected devices, flash files on the handset, and much more.
It is important to note that USB drivers can be utilized and operated by mobile devices and other external devices on a Windows computer. These include but are not limited to mice, keyboards, printers, external hard drives, speakers, and USB flash drives. If you need to download Motorola USB Drivers, you can find them here.
Unlock the Bootloader of Your Phone:
You need to unlock the Moto G40 Fusion’s bootloader before installing custom ROMs.
Install TWRP Recovery:
You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Moto G40 Fusion.
Download Android 14 ROM:
You will find all the Android 14 custom ROMs for your Moto G40 Fusion (hanoip) here.
| Lineage OS 21 | XDA Development Page |
| Pixel Experience ROM | XDA Development Page |
| Awaken OS | XDA Development Page |
| CrDroid OS | XDA Development Page |
Download Android 14 Gapps:
Most third-party AOSP ROMs, also known as aftermarket firmware, do not include preinstalled Google apps. You can manually install Android 14 GApps with our guide.
Warning!
GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.
Instructions To Install:
- Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
- Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
- Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:
adb reboot recovery
- Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.
TWRP Home - If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
- When that is done, you may reboot your device. Head over to Reboot and select System.
The installation of AOSP Android 14 on Moto G40 Fusion is complete, and your device will now boot with the newly installed OS. It’s worth noting that the first boot may take some time, and you may need to set up your device from scratch. With that, our guide to installing AOSP Android 14 on Moto G40 Fusion comes to an end.
Conclusion
If you want to try out the latest Android OS version on your Moto G40 Fusion, flashing the ported Android 14 is an option. Although it seems like the Moto G40 Fusion won’t receive the official Android 14 update from the manufacturer, you can still enjoy most of the features and visual treatment with this ported version. However, if you encounter any bugs or stability issues, it’s important to report them to the respective forum.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.