In this guide, we will show you how to bypass the FRP on the Infinix Note 12 / 12 Pro 5G (X671, X671B) smartphone. As we know, the Infinix Note 12 5G and 12 Pro 5G were launched in India and sports a 6.7-inch full-HD+ AMOLED display powered by a MediaTek Dimensity 810 5G SoC along with up to 8GB of RAM. Both the devices caries almost identical specifications except for the camera feature as Infinix Note 12 5G features a 50 MP primary camera. In contrast, the Infinix Note 12 Pro 5G model gets a 108-megapixel main rear camera.
If you have lost the Google account information to access your device after a factory reset, this guide is for you. FRP stands for Factory Reset Protection, which protects your device and information, including screen locks and data encryptions. It is enabled automatically when you add the Google account to your device and will be disabled if the Google account is removed from the device prior to the Factory Data Reset.
Page Contents
Infinix Note 12 Pro Device Overview:
The Infinix Note 12 Pro features a 6.7 inches AMOLED panel with a 60 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. Under the hood, we get the MediaTek Dimensity 810 processor built on a 6nm manufacturing process. It is an octa-core processor with two Cortex-A76 cores clocked at 2.4 GHz and six Cortex-A55 cores clocked at 2.0 GHz. For handling the graphics-intensive tasks, we have the Mali-G57 MC2. The smartphone comes with Android 12 out of the box with XOS 10.6 skin running on top.
In terms of optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup consists of a 108 MP primary sensor paired with an f/1.8 lens, a 2 MP macro sensor paired with an f/2.4 lens, and a 2 MP depth sensor paired with an f/2.4 lens. The selfie camera at the front is a 16 MP primary sensor paired with an f/2.0 lens. The front and rear camera systems can capture 1440p videos at 30 fps.
The smartphone comes in a single storage option with 128GB internal storage + 8GB RAM. We also get a dedicated MicroSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n, Bluetooth 5.0, GPS, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, gyro, proximity, and compass. Powering it all is a 5000 mAh battery that can be topped up quickly using a 33W power adapter. The smartphone is available in two color options: Black and White.
Pre-Requirements:
- This guide works only on Infinix Note 12 / 12 Pro 5G (X671, X671B). Don’t try it on other devices.
- You need a Windows PC or Laptop with a working USB cable.
- Download the SP Flash Tool to bypass via 1st method.
- For Scatter File: Download Infinix Note 12 / 12 Pro 5G (X671, X671B) Firmware Flash File
- Download MTK VCOM Drivers and install them on your computer.
- Download and install the Infinix USB Drivers on your PC.
- Make sure to charge your device to at least 60% before following this step.
- Take a full backup of your device’s internal data.
After following all the pre-requirements mentioned above, you can now follow the flashing steps carefully:
Warning!
Steps to ByPass FRP lock verification on Infinix Note 12 / 12 Pro 5G
Method 1: Using SP Flash Tool
Follow these instructions carefully to remove the FRP lock on the Infinix Note 12 / 12 Pro 5G MediaTek-powered device via the SP Flash tool.
You can watch our video guide to remove the FRP lock on Infinix Note 12 / 12 Pro 5G.
Method 2: Using Infinity CM2
Follow these instructions to bypass FRP lock on Infinix Note 12 / 12 Pro 5G via Infinity CM2:
Method 3: Using Miracle Box Tool
Follow these instructions to bypass the FRP lock on Infinix Note 12 / 12 Pro 5G via Miracle Box Tool
We hope you’ve successfully bypassed the FRP Lock on your Infinix Note 12 / 12 Pro 5G (X671, X671B). If you’ve any issues or queries regarding this, feel free to write them down in the comments below.