In this guide, we will show you how to bypass the FRP on the Tecno Pova 3 (LF7, LF7n) smartphone. As we know, the Tecno POVA 3 was launched in India as the latest affordable gaming smartphone that runs on Android 12. The smartphone features a 6.9-inch full-HD+ Dot-in display with a 90Hz refresh rate powered by a MediaTek Helio G88 SoC, along with up to 6GB of RAM. Tecno POVA 3 sports a 50 MP triple rear camera setup with quad flash. On the front, it has an 8 MP hole-punch selfie camera.
If you are someone who has lost the Google account information to access your device after a factory reset, then this guide is for you. FRP stands for Factory Reset Protection which protects your device and information, including screen locks and data encryptions. It is enabled automatically when you add the Google account to your device and will be disabled if the Google account is removed from the device prior to the Factory Data Reset.
Tecno Pova 3 Device Overview:
The Tecno Pova 3 features a 6.9 IPS LCD panel with a 90 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2460 pixels and an aspect ratio of 20:9. Under the hood, we get the MediaTek Helio G88 processor built on a 12nm manufacturing process. It is an octa-core processor with two Cortex-A75 cores clocked at 2.0 GHz and six Cortex-A55 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Mali-G52 MC2. The smartphone comes with Android 11 out of the box with HIOS skin running on top.
In terms of optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup consists of a 50 MP primary sensor paired with an f/1.6 lens, a 2 MP depth sensor paired with an f/2.4 lens, and another 2 MP sensor. The selfie camera at the front is an 8 MP primary sensor paired with an f/2.0 lens. The rear camera setup can capture 2K videos at 30 fps, while the front camera is limited to 1080p video recording.
The smartphone comes in two storage options: 64GB internal storage + 4GB RAM and 128GB internal storage + 6GB RAM. We also get a dedicated microSD slot for storage expansion. In terms of communications, we get WLAN, Bluetooth, GPS, NFC, FM radio, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, proximity, and compass. Powering it all is a 7,000 mAh battery that can be topped up quickly using a 25W power adapter. It also supports reverse wireless charging of 10W. The smartphone is available in three color options: Electric Blue, Tech Silver, and Eco Black.
- This guide works only on Tecno Pova 3 (LF7, LF7n). Don’t try it on other devices.
- You need a Windows PC or Laptop with a working USB cable.
- Download the SP Flash Tool for bypassing via 1st method.
- For Scatter File: Download Tecno Pova 3 (LF7, LF7n) Firmware Flash File
- Download MTK VCOM Drivers and install them on your computer.
- Download and install the Tecno USB Drivers on your PC.
- Make sure to charge your device to at least 60% before following this step.
- Take a full backup of your device’s internal data.
After following all the pre-requirements mentioned above, now you can follow the flashing steps carefully:
Steps to ByPass FRP lock verification on Tecno Pova 3
Method 1: Using SP Flash Tool
Follow these instructions carefully to remove the FRP lock on the Tecno Pova 3 MediaTek-powered device via the SP Flash tool.
You can watch our video guide to remove the FRP lock on Tecno Pova 3.
Method 2: Using Infinity CM2
Follow these instructions to bypass the FRP lock on Tecno Pova 3 via Infinity CM2:
Method 3: Using Miracle Box Tool
Follow these instructions to bypass the FRP lock on Tecno Pova 3 via Miracle Box Tool
We hope that you’ve successfully bypassed the FRP Lock on your Tecno Pova 3 (LF7, LF7n). If you’ve any issues or queries regarding this, feel free to write them down in the comments below.