UMIDIGI is a vendor that comes with a wide range of smartphones. Recently they have unveiled its new mid-range smartphone, i.e., the UMIDIGI S5 Pro. This sports the Helio G90T, 6.39 inch AMOLED display, 48MP quad rear camera setup, 16MP selfie motorized pop-up unit, 4680 mAh battery, 6GB of RAM, and with 256GB of UFS 2.1 storage.
If you have bought this device and want to connect it to PC, which is undeniable, then this post simply enables you to download the latest Umidigi S5 Pro USB Drivers for Windows 7, 8, and 10 very simple.
It is essential to have USB drivers whenever you have to connect Umidigi S5 Pro to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Umidigi S5 Pro manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Umidigi S5 Pro USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
Umidigi S5 Pro Device Overview
The UMIDIGI S5 Pro sports a 6.39 inch AMOLED display with a Full HD+ resolution. This display is in the 19:5:9 aspect ratio, a screen to body ratio of 93.1 percent, a pixel density of 398 Pixel Per Inch (PPI), a resolution of 1080 x 2340 pixels, and it supports ten fingers at a time. The brand doesn’t reveal which version of the Gorilla Glass they are using, and it a full display smartphone. This AMOLED display also comes with an in-display fingerprint scanner.
Underneath the UMIDIGI S5 Pro, it sports the MediaTek Helio G90T, which is built on the 12nm process. This SoC comes with two Cortex A76 cores, which clocks at 2.05GHz and other 6 Cortex A55 cores, which clock at 2.0GHz. To the GPU side, this SoC comes with the Mali G76 MC4 GPU. That said, coming to the variants in which it is available, it is available only in a single variant, i.e., with 6GB of LPDDR4x RAM. It also comes with 256GB of UFS 2.1 onboard storage. Further, this is also expandable via the micro SD card up to 256GB.
Talking about the optics, the UMIDIGI S5 Pro sports a quad rear camera setup. This consists of a primary 48MP Sony IMX 586 sensor with an aperture value of f/1.79, and PDAF. This primary sensor, coupled with a 16MP secondary ultra wide-angle sensor with a field of view of 120°. Further, it has a tertiary 5MP depth sensor, and finally, it has a quaternary 5MP macro sensor with a 2cm macro distance. To the front, it has a 16MP sensor that is placed in a motorized unit.
The UMIDIGI S5 Pro runs on the latest Android 10. It provides you a pure stock android experience and with privacy controls. The UMIDIGI S5 Pro packs a 4,680 mAh battery with support for 18W Quick Charge 3.0 fast charging. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot. Bluetooth 5.1, A2DP, LE, aptX HD. GPS with dual-band A-GPS, GLONASS, BDS, GALILEO, QZSS. FM radio USB 2.0, Type-C 1.0 reversible connector, USB On-The-Go. The device is available in two color options, namely the Cosmic Black and Ocean Blue.
Umidigi S5 Pro USB drivers
The USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Umidigi S5 Pro from your PC in case you have installed it. Once you are done, click the below link to download USB Drivers on your PC.Download Latest USB Drivers
You must disconnect your device from the PC first. Next, download this .zip file and extract it. You may need to install an app from the Play Store to extract this file. You can proceed with any which are available in the Play store for this purpose. Once download, double tap on the file and follow the instructions on the screen.
How to Install Umidigi S5 Pro Latest USB Drivers
You can download and install Umidigi S5 Pro USB Drivers on your PC without any issues. If you face any problem, then make sure to reach us via comment or mail. We will get in touch with you. Here is the complete guide to manually install Android USB drivers on your PC.
Umidigi S5 Pro MediaTek VCOM Drivers
The MediaTek MT65xx USB VCOM Driver is the common USB driver for all the Android smartphones powered by MediaTek processor. If you are one who is looking to install Stock ROM or even TWRP Recovery, then you need this driver who will recognize your Umidigi S5 Pro when you connect it to PC. As we said, Umidigi S5 Pro is a Mediatek device so this driver is important if you want the device to recognize in the software such as SP Flash tool, Aladdin, etcDownload MediaTek USB VCOM Drivers
Download SP Flash tool for Umidigi S5 Pro
Did your phone get into boot loops, or did you brick your Umidigi S5 Pro by messing up with its software? Then the simple solution is installing a Stock ROM file on Umidigi S5 Pro. One day you might end up with a bricked phone. When it happens, the SP Flash tool comes in handy. SP Flash tool (also known as Smartphone flash tool) is a which windows / Linux application that offers total control over your smartphone. It means that you can have full access to modify and align the internal files according to your liking. The application only supports Mediatek smartphones.
By using SP flash tool, you even install a Custom Recovery, install Custom Kernel and also root your phone.
Umidigi S5 Pro ADB Fastboot Tool:
If you have bought this device and want to try some other custom ROM or recovery. Then you may need this ADB Fastboot driver on your PC. Though you have to Unlock Bootloader first, then this tool is really important. Download the ADB and Fastboot tool and Install it on your PC.Download ADB and Fastboot tool
What is ADB?
ADB or Android Debug Bridge is a small debug tool that you will find in the Android Software Development Kit (SDK). It is basically a command-line tool that does the communication between your Android device and a computer. With ADB, your device can be controlled from the computer via USB, files can also be transferred, and it runs powerful shell commands. ADB can be used to send terminal commands to an Android device for changing the system level.
What is Fastboot:
Like ADB, Fastboot is also a part of SDK. The Fastboot tool could be helpful for reflashing partition and image files on your device. In a fastboot, system, the file system images can be modified from a computer over a USB connection. Like recovery, updates and zip files can also be installed from fastboot.
Instructions to Install:
You can install the ADB driver on both windows and mac. You can follow the below instructions to install ADB on both Windows and PC.