How to Install Stock ROM on Lenovo K10 XT2025-3

On this page, we will guide you on how to install the official stock ROM flash file on your Lenovo K10 XT2025-3. Well, the device is based on Android 9.0 Pie which is powered by the MediaTek Helio P22 processor. This guide will be helpful to unbrick or fix any software issues on your device.

To install the firmware flash file on Lenovo K10 XT2025-3, you need to download the software called SP Flash tool (also known as Smartphone flash tool). This method simple and easy. We have also added video and step by step tutorial to make things easier to flash the firmware file.

Lenovo K10

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Lenovo K10 Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Lenovo K10
  • You can fix the boot loop issue on Lenovo K10
  • Fix Unfortunately, the app has stopped error on Lenovo K10
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot Lenovo K10
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Lenovo K10 back to Factory State

How to Flash Lenovo K10 XT2025-3 Firmware File

Before installing the Stock ROM on your Lenovo K10, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

Lenovo K10 XT2025-3 Flash Files

Software Details Download Link
Flash File Name:P160CN_PVT_9.0_KSA_64B_CFC_233.01-01
File Size: 1.2  GB
Android Version: 9.0 Pie
Download Link
Flash File Name: (XT2025-3-DS) (PAGX0006SG) (Carrier Retail Asia – ASIA – UMTS_LTE) (Android 9) P160CN_PVT_9.0_LNV_64B_CFC_210.01
File Size: 1.2  GB
Android Version: 9.0 Pie
Download Link

Instructions to Install: via SP Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  1. Make sure you follow and download all the required files and flash tool on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User InterfaceSP Flash Tool Folder
  3. Once your load the SP Flash tool UI, Tap on the Download option
    SP Flash Tool Screen
  4. In the download tab, you have to load both the download agent and the sMeizuter text file in the sMeizuter-loading section.
  5. You will find the sMeizuter text file inside the ROM package for most cases, if not, you can create a sMeizuter text file on your own.
  6. Once you load the file, click the Download buttonSP Flash Tool Download Button
  7. To start the upgrade process of stock ROM on your Lenovo K10, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  8. When the phone connects, your device will start upgrading the stock firmware
  9. You need to wait for a few minutes to complete the upgrade process.
  10. Once the flashing process completes, you will find a green button which means a successful upgrade. sp green ring
  11. That’s it! You can reboot your Lenovo K10

Follow our full-depth video guide below:

Video Guide to Install Stock ROM via SP Flash Tool

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Lenovo K10 device successfully. Feel free to ask in the comments below for any queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.