In this guide, we have the latest stock Firmware flash file for the Vivo S17 powered by Qualcomm SM7325-AE Snapdragon 778G+ 5G processor. To install the firmware flash file, we need software called the QFil Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.
This process is helpful if you have bricked your device, lag, or shuttering performance, fix Bluetooth and WiFi issues, and unroot or bypass the FRP lock. So, without wasting time, let’s understand what a stock firmware flash file is.
Page Contents
Vivo S17 Device Overview:
The Vivo S17, released in June 2023, boasts a sleek and lightweight design, measuring 164.2 x 74.4 x 7.5 mm and weighing 186 g. It features a Dual SIM (Nano-SIM, dual stand-by) setup. The device’s display is a 6.78-inch AMOLED screen with a resolution of 1260 x 2800 pixels, offering a high pixel density of approximately 453 ppi. It supports 1 billion colors, a 120Hz refresh rate, HDR10+, and a peak brightness of 1300 nits, ensuring a vibrant and smooth visual experience.
Under the hood, the Vivo S17 runs on Android 13 with OriginOS 3. It is powered by the Qualcomm SM7325-AE Snapdragon 778G+ 5G chipset, featuring an octa-core CPU (1×2.5 GHz Cortex-A78, 3×2.4 GHz Cortex-A78, and 4×1.9 GHz Cortex-A55) and an Adreno 642L GPU. The device does not have a card slot but offers ample internal storage options: 256GB with 8GB or 12GB RAM and 512GB with 12GB RAM. The 256GB variants use UFS 2.2, while the 512GB variant uses UFS 3.1 for faster data transfer.
The Vivo S17’s camera system includes a dual rear setup with a 50 MP wide lens featuring PDAF and OIS and an 8 MP ultrawide lens. It supports 4K and 1080p video recording. The front camera is a 50 MP wide lens with autofocus and dual-LED flash, capable of 1080p video recording. The device has a loudspeaker but lacks a 3.5mm jack, though it supports 24-bit/192kHz Hi-Res audio.
In terms of connectivity, the Vivo S17 supports Wi-Fi 802.11 a/b/g/n/ac/6, dual-band, Wi-Fi Direct, Bluetooth 5.2, GPS, GLONASS, BDS, GALILEO, QZSS, and NFC. It uses a USB Type-C 2.0 port with OTG support. The device includes several sensors: an under-display optical fingerprint sensor, accelerometer, gyro, proximity sensor, compass, and color spectrum sensor. It is powered by a 4600 mAh non-removable battery with 80W wired charging, capable of reaching 70% in 30 minutes.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Vivo S17 Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adware from Vivo S17
- You can fix the boot loop issue on Vivo S17
- Fix Unfortunately; the app has stopped errors on Vivo S17
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot Vivo S17
- To Reset or Remove FRP on your device
- Restore Vivo S17 to Factory State
Firmware Details:
- Device Name: Vivo S17
- ROM Type: Stock ROM
- Gapps File: Included
- Tool Supported: QFil Flash tool
- Processor: Qualcomm SM7325-AE Snapdragon 778G+ 5G
- Android Version: Android 13, OriginOS 3
How to Install Vivo S17 Flash File
Before installing the Stock ROM on your Vivo S17, you should download the firmware flash file. Then, download and install the USB Drivers and flash tool on the PC. Once you finish these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: Vivo S17
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup using any method given below
- Download Flash Tool: Download AFTool | QFil Flash Tool or QPST Flash tool
- Download Drivers: Qualcomm USB Drivers and Vivo USB Drivers
Download Flash Files
| Firmware Detail | Download Link |
| Flash File Name: PD2283F_EX_A_14.1.3.14 File Size: 11 GB File Type: OTA Android Version: Android 14 |
Download |
| Flash File Name: PD2283F_EX_A_14.1.3.5 File Size: 11.66 GB File Type: OTA Android Version: Android 14 |
Download |
| Flash File Name: PD2283F_EX_A_14.1.2.9 File Size: 11.40 GB File Type: OTA Android Version: Android 14 |
Download |
Method 1: Instructions to Install via Recovery:
First, you can try the official method to install the OTA stock ROM update via Vivo device recovery. Follow the guide link below to install the OTA update on the Vivo device.
Guide to Install Vivo Firmware on any Vivo smartphone
Method 2: Instructions to Install via QFIL Tool:
Download the Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using the QFIL tool.
Guide to Install Stock ROM using QFIL Tool
Method 3: Instructions to Install via MSM Download tool:
- Download the MSM Download tool, firmware, and drivers on your PC.
- Now install the USB drivers.
- Place the MSM download tool and firmware in the same folder
- Open the MSM download tool and connect your device to your PC/Laptop
- Once you connect, it will automatically load the firmware; if not, select it manually.
- Click on the start button and wait patiently to complete the installation process.
- Once it is done! Remove your device from your PC. That’s it!
That’s it, guys. We hope you’ve successfully installed the Stock Firmware on your Vivo S17 device. Feel free to ask any questions in the comments below for any queries.